Im asking $50.00 + shipping, (should be no more than $6.00 or so, but im gonna check on that later today)
These have a brushed aluminum look to them. over time they may dull in appearnace or scratch some, all i do is take a fine grit drywall sanding sponge and go over it to keep it looking new. this has worked for my original piece that i did well over year ago.

NOTE: if you want one of these, please know that they are hand made from aluminum and are not machine quality perfect!!!! there MAY be slight imperfections in the materials, or some angle lines not perfectly straight. They should only be noticable up close, but not once mounted to you console.

HOWEVER, I am very anal and have tried very hard to make them as good as i could. Im the guy that will notice a picture off angle by 1/8in from across the room. Part of whay it has taken so long to do these is because of my analness.
You may have to tweek the mounting legs a little to get a perfect fit to your console. these are thin enough gauge plate so as not to be a problem though.
If you use your stock shifter boot, you will have to punch holes in it to mount it to the screws that hold the ring to the plate on the underside. Leave yourself enough slack in your boot to go thru your entire shift pattern. make sense?
So, if you would like one, i will take MO or preferably payapl. use my e-mail address for paypal: t_hawkins@hotmail.com
just let me know that your getting the shifter plate.
Sorry for not good quality picture.

for the first 4 buyers: when you get these please feel free to post your review and be honest so i can make improvements if needed. Please feel free to e-mail me if you have any problems or questions.
Thanks
tim

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

I want one but i have a few questions. Hit me up on AIM: Remdawgz


95 gs-t
To much shit to list !!

Pic coming in a few weeks.

i dont have AIM, whats your e-mail, or you can e-mail me.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

I want one , i have a short shifter is that ok\// if it is e mail me for details josenex36@hotmail.com

<>
Tanabe cat back
injen air intake

hotmail is telling me your e-mail don't exist...
but yes they should work with short throw shifters.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Can you put up some pics of it installed? I'm interested.

http://photos.freeserve.com/public/detail.html?c_album=400479
Member#3206(LOL)

Last night I lay in bed looking up at the stars in the sky and I thought to myself...

where the hell is the ceiling?

This is the only one i have of install right now. hope this helps.

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Hey Tim!
It looks great! How are the Dash pods coming? That was the one that I was really interested in!
Let me know when I can send you some money.
-Chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Does the small ring on the top come off with just unscrewing the hex bolts? And does it come with the shift diagram? Let me know how much for shipping to 17013

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

Remdawgz@aol.com


95 gs-t
To much shit to list !!

Pic coming in a few weeks.

here is my e mail again I spelled wrong josemex36@hotmail.com

<>
Tanabe cat back
injen air intake

Where are you at Tim??

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

Hey, im here sorry! I will post al link with all the info about these to hopefully answer any questions you may have! If i dont get them answered there, please feel free to email me! thanks
tim

Jersy - yea they come apart at the hex bolts. I can do the shifter plaque if you want, but it will be a little extra. I can let you know how much tomorrow. shipping will be $6.00 for USPS priority.
Hope that helps!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Looks great. I'm interested in one but I am unable to pay at this moment. I don't know when I will beable to buy on but I hope you make more if those 4 sell.

i will be making more...
i got ya covered!

Heres the Q & A link:
http://my97rs.homestead.com/Shifter.html

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

*cough* BUMP

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

i meant "bump"

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Still have one?

Allan
2008 Magnetic Black 350z NISMO /1976 Austin Mini 1098 Special (export)

Member# 1980

Yep!!!

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Bump for these finely machined pieces.

95 eclipse RS

14.80 @ 94mph with no turbo

Hey man, I would buy one from you, I think they look cool as hell, I just don't want to punch holes in my boot...

hey man i want one i have the money in like 4 weeks cuz i gotta get a new tranny e-mail is eclipse_guy16

I can buy one in a week or two, I hope you have a few left .
95 gs-t
6 bolt swap
T-2small turbo
15 Psi
Joe P mbc
Greddy uip
Greddy lip
Greddy bov
Supra smic
Borla cat back exhaust
Gutted cat

i DO

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)