2GNT.com Forums - Viewing topic - FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #96045

View in linear mode

Subject: "FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"

This topic is locked.
Previous topic | Next topic

Initial DSM	Jul-28-06 10:23 AM
Member since Sep 23rd 2003 2833 posts,

#96045, "FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
Jul-28-06 11:38 AM by Initial DSM

60-1 turbo t3 .63 a/r stage 3 turbine S cover
this turbo is brand new never used ..has 4 bolt turbine outlet-
$600 plus shipping

Tial Bov never used. polished-
$190 plus shipping

MSD DIS-2 used-
$250 plus shipping

Apexi Super AVC-R Boost Controller -
like new used for a few months comes with every thing to install
$330 plus shipping

N/X Nitrous kit with Zex bottle -
Used. Doesnt come with activation switch -
$250 plus shipping

2004 PT Cruiser Transmission w/ Quaife
Bought from Darryl Cox Racing brand new pulled from PT.
Stronger gears than stock 420a tranny -
$1300 plus shipping

Driveshaft Shop Stage III Axles brand new - $1050 plus shipping
(better than getting it from them): I have a signed clause receipt:

"Will upgrade to Level 5 if axles break, no larger than a 25" tall tire" - Driveshaft shop.

Spearco Intercooler good for 400hp. Never used it (was Dougie2's) - $370 plus shipping

FAL slimline fans New -
$110 plus shipping

Crane 2.4 Cams new - $210 plus shipping

Tim97rs custom grey fiberglass AVC-R/AFC dash holder
also holds 2 guages. slight crack on the side - $55 plus shipping

Grey Rear 2G seats excellent condition -
$135 plus shipping

Stock 2.4L PT block - $300 plus shipping

GI (Have to pull these from the car is why):
Built 2.4L Stratus block rebuilt no miles(Wiseco pistons/Eagle H-Beam rods) -
$1500 plus shipping
420a ported race head used (was Armond's (AvengerEST) head) w/ Crane 0018 cams -
$1100 plus shipping

Custom FF Intake Manifold (blue):
$200 plus shipping
Custom FF ceramic tubular exhaust manifold flanged for Tial WG -
$300 plus shipping

1995 Eagle Talon shell. Green. -
$700 pick up only

All parts located 30 minutes north from N.Y.C. (Yonkers)
Pics to come soon.

------

Report This Post to Admin

Printer-friendly copy | Top

Replies to this topic

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), eclipse982nrRST, Jul-28-06 11:46 AM, #1

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), HipHop615, Jul-28-06 12:41 PM, #2

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), mike_d, Jul-28-06 01:09 PM, #3

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), BumpinTalon, Jul-28-06 01:34 PM, #4

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), hookduphatch, Jul-28-06 04:03 PM, #5

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), BumpinTalon, Jul-28-06 04:16 PM, #6

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), greygoose, Jul-29-06 09:41 AM, #7

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Jul-29-06 11:02 PM, #8

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Jul-31-06 07:40 AM, #9

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), greygoose, Jul-31-06 04:44 PM, #10

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), pghsebring, Aug-01-06 01:24 PM, #11

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Remy, Aug-01-06 01:36 PM, #12

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-01-06 02:10 PM, #13

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-01-06 02:21 PM, #14

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Team

Team

dougie2, Aug-01-06 02:43 PM, #15

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-01-06 02:55 PM, #16

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Team

Team

dougie2, Aug-01-06 03:21 PM, #17

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-01-06 05:58 PM, #18

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), greygoose, Aug-02-06 08:03 AM, #19

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), HipHop615, Aug-02-06 08:14 AM, #20

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-02-06 08:36 AM, #21

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-09-06 02:48 PM, #22

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-02-06 08:41 AM, #23

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), greygoose, Aug-02-06 11:40 AM, #24

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), T_K, Aug-02-06 05:58 PM, #25

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-02-06 06:32 PM, #26

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-02-06 06:31 PM, #27

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), greygoose, Aug-03-06 07:23 PM, #28

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-04-06 12:08 PM, #29

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), turbo8u, Aug-10-06 09:00 AM, #30

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-11-06 08:43 AM, #31

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Kirby, Aug-11-06 09:49 PM, #32

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), turbo8u, Aug-13-06 10:59 AM, #33

RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK), Initial DSM, Aug-13-06 03:02 PM, #34

eclipse982nrRST	Jul-28-06 11:46 AM
Member since Mar 16th 2004 6314 posts,

#96050, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 0

pics of intake and exhaust manifolds please to widersturbo@aol.com

-MIKE-

Stroked 2.2L

Report This Post to Admin

Printer-friendly copy | Top

HipHop615	Jul-28-06 12:41 PM
Member since Sep 14th 2003 2333 posts,

#96051, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 1

Pics of Fans?

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

Report This Post to Admin

Printer-friendly copy | Top

mike_d	Jul-28-06 01:09 PM
Old School 2GNTer 718 posts,

#96052, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 2

pic of intake manifold?

_______________________________________

95 Talon ESi-T

Report This Post to Admin

Printer-friendly copy | Top

BumpinTalon	Jul-28-06 01:34 PM
Member since Mar 23rd 2004 2381 posts,

#96053, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 3

pics of exhaust manifold and turbo to bumpin_talon@hotmail.com if you got em

1995 Eagle Talon ESi

Report This Post to Admin

Printer-friendly copy | Top

hookduphatch	Jul-28-06 04:03 PM
Member since Jul 10th 2004 552 posts,

#96056, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 4

pics of the exhaust manifold to hookduphatch@yahoo.com

95 Eclipse RS - Sold and In Montana Now
Project 95 GSX - In Full swing.

Report This Post to Admin

Printer-friendly copy | Top

BumpinTalon	Jul-28-06 04:16 PM
Member since Mar 23rd 2004 2381 posts,

#96057, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 5
Jul-28-06 09:15 PM by BumpinTalon

ah way too much interest in the exh mani

If it is the same one that dougie2 is running and that other dude had... silvernt? I will buy it sight unseen.

1995 Eagle Talon ESi

Report This Post to Admin

Printer-friendly copy | Top

greygoose	Jul-29-06 09:41 AM
Member since Dec 11th 2005 274 posts,

#96088, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 6

More info:

GI (Have to pull these from the car is why):
Built 2.4L Stratus block rebuilt no miles(Wiseco pistons/Eagle H-Beam rods) -
$1500 plus shipping
420a ported race head used (was Armond's (AvengerEST) head) w/ Crane 0018 cams -
$1100 plus shipping

And the transmission as well.

I'll keep an eye on the inbox. Thanks!

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Jul-29-06 11:02 PM
Member since Sep 23rd 2003 2833 posts,

#96107, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 7

I will have pics up on Monday

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Jul-31-06 07:40 AM
Member since Sep 23rd 2003 2833 posts,

#96158, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 8

Nitrous Kit (missing activator switch)

2003 PT Cruiser Block 25k miles on it

Spearco 400hp

2G seats

New RnR 3" Exhaust w test pipe: $450 plus shipping

FF Exhaust manifold Ceramic tubular never used only installed it

FF Intake Manifold never used just installed

60-1 turbo new

AVC-R used

New PT Tranny w/ Quaife

MSD DIS2 used

DSS axles new

Tial BoV new new

Crane 2.4 Cams new

used 420 stock diff $50 plus shipping

Prices are in first post. All --- plus Shipping

Report This Post to Admin

Printer-friendly copy | Top

greygoose	Jul-31-06 04:44 PM
Member since Dec 11th 2005 274 posts,

#96182, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 9

I'm still looking for the specs on the top and bottom ends. =)

Report This Post to Admin

Printer-friendly copy | Top

pghsebring	Aug-01-06 01:24 PM
Member since Dec 05th 2004 139 posts,

#96228, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 10

So that transmission, is it from the regular or turbo pt?

Any part numbers on it?

Stuart

Report This Post to Admin

Printer-friendly copy | Top

Remy	Aug-01-06 01:36 PM
Donating 2GNT member 6156 posts,

#96230, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 11

Scott call me. I want the Tial Bov.

----------------------------------------
GT35 and stuff.
Lucky Number 6 ...

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-01-06 02:10 PM
Member since Sep 23rd 2003 2833 posts,

#96232, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 12

Originally posted by Remy
Scott call me. I want the Tial Bov.

---------------------------------------- GT35 and stuff. Lucky Number 6 ...

aiight cool

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-01-06 02:21 PM
Member since Sep 23rd 2003 2833 posts,

#96234, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 11

Originally posted by pghsebring
So that transmission, is it from the regular or turbo pt? Any part numbers on it? Stuart

Non turbo PT tranny. Turbo PT tranny wouldnt bolt up on our cars.

you can call Darryll Cox Racing where I got it from and ask for exact part # and info - 3366236611
(he races turbo neons and SRT-4's etc)

Report This Post to Admin

Printer-friendly copy | Top

dougie2	Aug-01-06 02:43 PM
Old School 2GNTer 2982 posts,

#96237, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 0

PM sent.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-01-06 02:55 PM
Member since Sep 23rd 2003 2833 posts,

#96238, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 15

Originally posted by dougie2
PM sent.

PM replied.

Hey Dougie, btw, can you please reprint the specs on the Spearco you sold me? I forgot everything dude thanks

---

Report This Post to Admin

Printer-friendly copy | Top

dougie2	Aug-01-06 03:21 PM
Old School 2GNTer 2982 posts,

#96239, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 16

Sent ya an e-mail back... let me know.

Here's the spec for the intercooler:

Core dimensions - 26x8x3
Flow - TOP to BOTTOM, ~2100 cfm
Endcaps - 2 1/2" H
Inlet - 2 1/2" ID

Inlet and outlet are on the same side. Fits 2G and 2GNT perfectly. It has 3 threaded fittings welded on the endcaps for mounting.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-01-06 05:58 PM
Member since Sep 23rd 2003 2833 posts,

#96256, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 17
Aug-01-06 06:01 PM by Initial DSM

Thanks.

No one's interested in the DSS axles or the Tranny?

Those are great parts. Basically, the stage III axles even if somehow you break them, you get a free upgrade to stage V from DSS.
Stage V is not cheap.
and the tranny is brand new no miles pulled straight off a PT Cruiser and Cox slapped a Quaife in it. I paid 1700
If I sell those then I'm defenatly pulling the other stuff off the car. It only makes sense that way.

Report This Post to Admin

Printer-friendly copy | Top

greygoose	Aug-02-06 08:03 AM
Member since Dec 11th 2005 274 posts,

#96283, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 18

Still waiting for detailed information on the top and bottom end....

Report This Post to Admin

Printer-friendly copy | Top

HipHop615	Aug-02-06 08:14 AM
Member since Sep 14th 2003 2333 posts,

#96289, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 19

Still waiting on PM. Part Number on Fans? Dual or Single? Color? Thanks

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-02-06 08:36 AM
Member since Sep 23rd 2003 2833 posts,

#96297, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 20

Originally posted by HipHop615
Still waiting on PM. Part Number on Fans? Dual or Single? Color? Thanks

bah.. sorry dude I forgot. Its all still unused in the original box in my garage. part # i gotta check. Dual fans in black.

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-09-06 02:48 PM
Member since Sep 23rd 2003 2833 posts,

#96712, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 20

Originally posted by HipHop615
Still waiting on PM. Part Number on Fans? Dual or Single? Color? Thanks

Dual black fans 210/220 pusher

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-02-06 08:41 AM
Member since Sep 23rd 2003 2833 posts,

#96298, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 19
Aug-02-06 08:42 AM by Initial DSM

Originally posted by greygoose
Still waiting for detailed information on the top and bottom end....

95' Stratus 2.4L block, Wiseco pistons, Eagle H-beam rods, race ported cylinder head w/ venturi stacks & 3 angle valve job, Crane 0018 cams, Crane springs & retainers, Ferrea SS valves, PT lifters.

Report This Post to Admin

Printer-friendly copy | Top

greygoose	Aug-02-06 11:40 AM
Member since Dec 11th 2005 274 posts,

#96318, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 23

What tensioner setup did you go with? Mileage? Overbore? CR?

Report This Post to Admin

Printer-friendly copy | Top

T_K	Aug-02-06 05:58 PM
Member since Nov 03rd 2005 219 posts,

#96366, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 24

are you parting stock parts?
I need a driver side window glass, non-power if there's a difference. I was sold a supposedly '95 Eclipse window which doesn't fit, because the bolts that attach it to the lever that raises it up and down is offset to the side.

1993 Eagle Talon TSI AWD: balance shafts, cruise & AC removed; 16psi, Dejon intake & UICP, ported 14b, EVOIII mani, ported 2G O2 housing, 2.5" Buschur dp to 3" Thermal exhaust, datalogger, front strut brace, prothane motor mounts

1995 Eclipse RS U-Boot; Tokico Illuminas, GSX front brakes, ST front swaybar, short shifter, CAI with K&N filter, rear disks and swaybar, front upper and rear lower strut braces, beater exterior

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-02-06 06:32 PM
Member since Sep 23rd 2003 2833 posts,

#96370, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 25

Originally posted by T_K
are you parting stock parts? I need a driver side window glass, non-power if there's a difference. I was sold a supposedly '95 Eclipse window which doesn't fit, because the bolts that attach it to the lever that raises it up and down is offset to the side.

nah sorry i dont have that

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-02-06 06:31 PM
Member since Sep 23rd 2003 2833 posts,

#96369, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 24

Originally posted by greygoose
What tensioner setup did you go with? Mileage? Overbore? CR?

No tensioner on it; I didnt get that far in building it up. Its jus the head on the block. The mileage on the head form Armond I believe was 15k after the rebuild. The block has no miles on the rebuild. Its 2.4; compression was 8:8:1.
Also seperate from it, I have a 2.4 crankscraper but I didnt put it on as well as a spare headgasket and the Crane 2.4 cams that arent on.

Report This Post to Admin

Printer-friendly copy | Top

greygoose	Aug-03-06 07:23 PM
Member since Dec 11th 2005 274 posts,

#96431, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 27

Originally posted by Initial DSM

Originally posted by greygoose What tensioner setup did you go with? Mileage? Overbore? CR?

No tensioner on it; I didnt get that far in building it up. Its jus the head on the block. The mileage on the head form Armond I believe was 15k after the rebuild. The block has no miles on the rebuild. Its 2.4; compression was 8:8:1. Also seperate from it, I have a 2.4 crankscraper but I didnt put it on as well as a spare headgasket and the Crane 2.4 cams that arent on.

Are the pistons .020, .030, etc over?
Miles on the block before build?
What makes this head worth $1100
Balanced? Blueprinted?
What shop? I need lots of details...

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-04-06 12:08 PM
Member since Sep 23rd 2003 2833 posts,

#96459, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 28

Originally posted by greygoose
Are the pistons .020, .030, etc over? Miles on the block before build? What makes this head worth $1100 Balanced? Blueprinted? What shop? I need lots of details...

Miles on the block before rebuild: roughly 65k
Balanced and Blueprinted.

STOCKUM MACHINE SERVICES
789 YORKTOWN
PT SPECIALIST
POQUOSON VA 23662

Customer Number 02082
Job Number 3923

GENERAL INFORMATION:
Bore Size: 3.4650 @ Suggested Clearance of .0035
Cam Shape: SHAPE #5 .0066" DROP
GRAM Weight at Inspection: 364.3 - 366.1

Customer's P.P. : .020 8.6

WRIST PIN:

Wrist Pin: S625 Pin Diameter: .866 Pin Length: 2.500
Pin Retainers: W5590 Retainer Width/ Wire Diameter: .063

RING GROOVE / LANDS:
Ring Type: 1mmx1.2mmx2.8mm

DOME AND VALVE POCKETS:

Dome Rise: .182- Deck Thickness: .422

Dome Volume: 17.00

Headwork done by Jentsen's Headporting in Atlanta Georgia, who have been porting heads for race cars for 30 years.
Full race port job
Crane springs and retainers
Ferrerea oversized valves
Crane 0018 camshafts
PT lifters and adjusters
Intake port ported in a Venturi shape funnel design.

Report This Post to Admin

Printer-friendly copy | Top

turbo8u	Aug-10-06 09:00 AM
Member since Jun 15th 2003 10552 posts,

#96752, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 29

wow Initial, do you still have a block you can sell me? My spare one got thrown away by my old dumbass roomate when I was in school.

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX

"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-11-06 08:43 AM
Member since Sep 23rd 2003 2833 posts,

#96786, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 30

Originally posted by turbo8u
wow Initial, do you still have a block you can sell me? My spare one got thrown away by my old dumbass roomate when I was in school.

I have a stock 2.4 block and a built one

Report This Post to Admin

Printer-friendly copy | Top

Kirby	Aug-11-06 09:49 PM
Donating 2GNT member 2181 posts,

#96806, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 31

You have PM on the turbo..

I edited to the wiki!

Originally posted by DR1665
NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.

Report This Post to Admin

Printer-friendly copy | Top

turbo8u	Aug-13-06 10:59 AM
Member since Jun 15th 2003 10552 posts,

#96836, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 31

Originally posted by Initial DSM

Originally posted by turbo8u wow Initial, do you still have a block you can sell me? My spare one got thrown away by my old dumbass roomate when I was in school.

I have a stock 2.4 block and a built one

how much for the stock block shipped to 92057? its going to be insane I know...

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX

"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Report This Post to Admin

Printer-friendly copy | Top

Initial DSM	Aug-13-06 03:02 PM
Member since Sep 23rd 2003 2833 posts,

#96849, "RE: FS: Parting out 1995 Eagle Talon esi 2.4 Project car (NEW YORK)"
In response to Reply # 33

Originally posted by turbo8u

Originally posted by Initial DSM

Originally posted by turbo8u wow Initial, do you still have a block you can sell me? My spare one got thrown away by my old dumbass roomate when I was in school.

I have a stock 2.4 block and a built one

how much for the stock block shipped to 92057? its going to be insane I know...

I have no idea but from NY to Cali I'm gonna guess and say anywere up to $150

Report This Post to Admin

Printer-friendly copy | Top

Top

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #96045

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.083 seconds, executing 82 queries.