Hahn Stage 5 turbo kit which includes portfueler, 20g, 3" dp and all the ic piping and intercooler turbo has 0 miles 3000
nvt 350 with 20k miles 350
Crower stage 2 cams 250
Spec stage 3 modular 250+shipping
AEM wideband O2 300
Carbon fiber autometer gauges:
Oil pressure elect 50
Volt 25
boost 40
water temp elect 40
EGT w probe 100
Eagle Rods 200
Turbo XS dual stage bc 100
Aem big rotor upgrade 300
Crane hi6 dis2 300
crane 8.5 firewires 30
crane 2 bar map 50
95 msd coil 65
crane dual trigger 120
crane timing retard controller 100
dual guage dash pod 25
Vis carbon fiber invader hood 200
energy suspension motor mount kit 100
walbro fuel pump 60
cometic head gasket 100
felpro full gasket kit 50
Driveshaft shop stage 2 axles 650
Fluidyne radiator and fal blue slimline fans 450

all prices are plus shipping

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Where are you located?

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

I will take:

crane 8.5 firewires 30


let me know your paypal info, thanks.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Pics of Fluidyne and Fans?

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

I sent you a PM about the tranny a day or two ago, but you didn't get back to me. I'll re-send it.

I thought that AFX underdrive was sold in your last thread? And what are the details on the Walbro, is it a 255? Let me know. Thanks.

-Justin


-96 RS
-98 GSX

pm sent

tranny sold

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

I recently learned that I do need an ECU running my MSnS. If you can send me a pic of the code on it, I'll buy it for $100 like we agreed.

Thanks

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

crane hi6 dis is sold

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

When are you going to send a picture of that ECU?

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Sitinlo has contacted me about working this out.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Is that a 255lph Walbro fuel pump? Do you take Paypal?

1995 RS-T @ 6psi......daily driver

Custom Stage 2 Turbo, Autometer gauges, K&N filter, 60MM Jeep TB, p&p intake manifold, 3" SS exhaust, test pipe, home-made polyurethane motor mounts & ES bushings, short shifter, Greddy shift knob, crankscraper

1999 GST......almost stock!

hard i/c pipes, intake, Greddy BOV, Greddy EVO 60mm catback exhaust, 3" SS downpipe, Autometer gauges


"Originally posted by DR1665
...Harry. My car topped out at 140 this morning. I need "turvo." Two of 'em. And Harry, I need the glue to be dry by tonight. Lata"

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

aem wideband sold thanks .bs0d

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

rods sold

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Originally posted by Dreamspawn

Originally posted by Sitinlo

Originally posted by Dreamspawn I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

still have it just kinda hard to find a box for it

I live in KY i could make to AL its not to far of a drive for that hood

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

PM sent.

-MIKE-

Stroked 2.2L

Payment sent for Wires. Thanks

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

What year is the car and are you still parting out stock parts?

If its a 97 or up, I need the crank position sensor, and the cam position sensor.


http://www.dsmregistry.com/detail.php?carid=1185

Originally posted by xcasbonx
What year is the car and are you still parting out stock parts? If its a 97 or up, I need the crank position sensor, and the cam position sensor. http://www.dsmregistry.com/detail.php?carid=1185

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

damn i wish i had some money since you live not too far. free bump.

all items are + shipping

intercooler with piping ready for msns with ait sensor and nx intercooler kit 700

new 20g turbo with 10psi wg 600

hahn mani 200 tapped for egt

portfueler new 950

hahn downpipe 300 with 2 o2 bungs for wideband and narrow

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Hey after this monday i will let you know bout coming down and getting the hood. If you are still up for it i'm still willing to make the drop down and back.

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

bump

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

'ello again.. can i get some info on those cams you got? and do you have the retainers/springs that would be requisite w/ those?

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

boost controller sold

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

are they the crower 2's or are they the crower 2 turbo grinds?

they are not grinds they are original

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

...sorry i know they are not grinds... i was just having a lapse of...intelligence there. but like i said, are they the reg. cams or are they the crane turbo cams?

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

axles sold

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on

MODS PLEASE DELETE THIS POST

Mods: JE8:8:1 pistons,Eagle Rods,fully built head w/1mm Rev valves,crane titanium springs and retainers,ported and polished head and intake mani,Hrc2 turbo kit,sfmu,safc,turbo xs dual stage boost controller,turbosmart megasonic,Fluidyne radiator,160deg thermo,spec stage 3 clutch,aem front and rear big rotors,3" hahn dp 3" back exhaust,stage 2 axles,and the list goes on