Hahn Stage 5 turbo kit which includes portfueler, 20g, 3" dp and all the ic piping and intercooler turbo has 0 miles 3000
nvt 350 with 20k miles 350
Crower stage 2 cams 250
Spec stage 3 modular 250+shipping
AEM wideband O2 300
Carbon fiber autometer gauges:
Oil pressure elect 50
Volt 25
boost 40
water temp elect 40
EGT w probe 100
Eagle Rods 200
Turbo XS dual stage bc 100
Aem big rotor upgrade 300
Crane hi6 dis2 300
crane 8.5 firewires 30
crane 2 bar map 50
95 msd coil 65
crane dual trigger 120
crane timing retard controller 100
dual guage dash pod 25
Vis carbon fiber invader hood 200
energy suspension motor mount kit 100
walbro fuel pump 60
cometic head gasket 100
felpro full gasket kit 50
Driveshaft shop stage 2 axles 650
Fluidyne radiator and fal blue slimline fans 450

all prices are plus shipping

Where are you located?

Originally posted by dsmmyth
Where are you located?

The very southeast tip of Alabama.

I will take:

crane 8.5 firewires 30


let me know your paypal info, thanks.

Pics of Fluidyne and Fans?

I sent you a PM about the tranny a day or two ago, but you didn't get back to me. I'll re-send it.

I thought that AFX underdrive was sold in your last thread? And what are the details on the Walbro, is it a 255? Let me know. Thanks.

pm sent

tranny sold

I recently learned that I do need an ECU running my MSnS. If you can send me a pic of the code on it, I'll buy it for $100 like we agreed.

Thanks

Originally posted by WickedESi
I recently learned that I do need an ECU running my MSnS. If you can send me a pic of the code on it, I'll buy it for $100 like we agreed. Thanks

will do

crane hi6 dis is sold

I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

When are you going to send a picture of that ECU?

Originally posted by WickedESi
When are you going to send a picture of that ECU?

email address again

Originally posted by Sitinlo

Originally posted by WickedESi When are you going to send a picture of that ECU?

email address again

joelbaldridge@bellsouth.net

TIA.

Originally posted by WickedESi

Originally posted by Sitinlo

Originally posted by WickedESi When are you going to send a picture of that ECU?

email address again

joelbaldridge@bellsouth.net TIA.

Hey, I really need that ECU quick, so I went ahead and PayPal'd you $100, I put in the note it was from WickedESi. Please get that shipped to me ASAP.

Thanks Bro.

Originally posted by WickedESi

Originally posted by WickedESi

Originally posted by Sitinlo

Originally posted by WickedESi When are you going to send a picture of that ECU?

email address again

joelbaldridge@bellsouth.net TIA.

Hey, I really need that ECU quick, so I went ahead and PayPal'd you $100, I put in the note it was from WickedESi. Please get that shipped to me ASAP. Thanks Bro.

will ship out tomorrow priority

Originally posted by WickedESi

Originally posted by WickedESi

Originally posted by Sitinlo

Originally posted by WickedESi When are you going to send a picture of that ECU?

email address again

joelbaldridge@bellsouth.net TIA.

Hey, I really need that ECU quick, so I went ahead and PayPal'd you $100, I put in the note it was from WickedESi. Please get that shipped to me ASAP. Thanks Bro.

Why did you send me the SRS Diagnostic Unit??? Where is the ECU?

Sitinlo has contacted me about working this out.

Originally posted by Dreamspawn
I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

still have it just kinda hard to find a box for it

Is that a 255lph Walbro fuel pump? Do you take Paypal?

Originally posted by MiztahfooLish
Is that a 255lph Walbro fuel pump? Do you take Paypal?

walbro isnt for sale anymore sorry

aem wideband sold thanks .bs0d

rods sold

Originally posted by Sitinlo

Originally posted by Dreamspawn I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

still have it just kinda hard to find a box for it

I live in KY i could make to AL its not to far of a drive for that hood :D

Originally posted by Dreamspawn

Originally posted by Sitinlo

Originally posted by Dreamspawn I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

still have it just kinda hard to find a box for it

I live in KY i could make to AL its not to far of a drive for that hood :D

come on down and its yours for 200

Originally posted by Sitinlo

Originally posted by Dreamspawn

Originally posted by Sitinlo

Originally posted by Dreamspawn I pm'ed you bout the VIS carbon fiber hood if you still have it i'm HIGHLY interested.

still have it just kinda hard to find a box for it

I live in KY i could make to AL its not to far of a drive for that hood :D

come on down and its yours for 200

Alright give me a few days to get things straight then i'll email you bout a day to come get it. Just pm me your email or we will just work it out through pm stricley

PM sent.

Payment sent for Wires. Thanks

What year is the car and are you still parting out stock parts?

If its a 97 or up, I need the crank position sensor, and the cam position sensor.


http://www.dsmregistry.com/detail.php?carid=1185

Originally posted by xcasbonx
What year is the car and are you still parting out stock parts? If its a 97 or up, I need the crank position sensor, and the cam position sensor. http://www.dsmregistry.com/detail.php?carid=1185

95

damn i wish i had some money since you live not too far. free bump.

all items are + shipping

intercooler with piping ready for msns with ait sensor and nx intercooler kit 700

new 20g turbo with 10psi wg 600

hahn mani 200 tapped for egt

portfueler new 950

hahn downpipe 300 with 2 o2 bungs for wideband and narrow

Hey after this monday i will let you know bout coming down and getting the hood. If you are still up for it i'm still willing to make the drop down and back.

Originally posted by Dreamspawn
Hey after this monday i will let you know bout coming down and getting the hood. If you are still up for it i'm still willing to make the drop down and back.

aight just let me know

bump

'ello again.. can i get some info on those cams you got? and do you have the retainers/springs that would be requisite w/ those?

Originally posted by DSMTalon
'ello again.. can i get some info on those cams you got? and do you have the retainers/springs that would be requisite w/ those?

they are crower stage 2 cams and u can use stock springs and retainers with them they have about 8k miles on them and look like brand new 340 shipped

boost controller sold

are they the crower 2's or are they the crower 2 turbo grinds?

they are not grinds they are original

Originally posted by djtrickee
Payment sent for Wires. Thanks

will be going out tomorrow usps priority

...sorry i know they are not grinds... i was just having a lapse of...intelligence there. but like i said, are they the reg. cams or are they the crane turbo cams?

Originally posted by DSMTalon
...sorry i know they are not grinds... i was just having a lapse of...intelligence there. but like i said, are they the reg. cams or are they the crane turbo cams?

they are crower stage 2 cams for street/strip applications

axles sold

MODS PLEASE DELETE THIS POST