well my bell housing has a damn window in it now...so i picked up a 3.55 tranny and need the bellhousing to swap the gear set to...i need it as cheap as possible too...thx guys
p.s look in manual trans forum for pic later.,....hehehe
#94273, "RE: WTB ASAP !!!!!!!!!!!!!!!!!!!!!!BELLHOUSING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 0
You will be extremely lucky if you can find just a bellhousing. I was in the same boat as you a few months ago with a pin that pushed out through the bellhousing. I finally gave up trying to find one and spent $45 to get it helicoiled. I don't know if that'll work for you without seeing a pic, but you might want to give it a shot.
#94296, "RE: WTB ASAP !!!!!!!!!!!!!!!!!!!!!!BELLHOUSING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 3
i have an extra bellhousing but it isnt the prettiest. The trans mount holes are stripped and poorly helicoiled and one of the shaft bearings are missing. I have searched high and low to get the correct bearing but dodge, mitsubishi and even specialty bearing shops cant seem to match it up. I ran into the same problem and i would def. get it welded.
#94313, "RE: WTB ASAP !!!!!!!!!!!!!!!!!!!!!!BELLHOUSING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!" In response to Reply # 4
Originally posted by taclipse i have an extra bellhousing but it isnt the prettiest. The trans mount holes are stripped and poorly helicoiled and one of the shaft bearings are missing. I have searched high and low to get the correct bearing but dodge, mitsubishi and even specialty bearing shops cant seem to match it up. I ran into the same problem and i would def. get it welded.
Originally posted by greygoose Get it welded. =)
na cant get it welded the whole bell is gone, the differential pretty much exploded and destroyed it
Search
Printer-friendly copy
0 Users in Chat
