#92387, "FS; Turbo stuff" May-19-06 12:05 AM by donnyb373
Me and my family are going through a bit of a finance chrisis and i need to sell some stuff i got laying around, First off i thank anyone who reads this......ok lets start
ALL THESE ITEMS ARE BRAN NEW.........NEVER SEEN BOOST OR DIRT FOR THAT MATTER....LOL
TURBONETICS t3/t4 DUAL CERAMIC BALL BEARING TURBO THE TRIM IS .48 ONTHE HOT SIDE AND 50 ONTHE COLD SIDE. I PAID 1K FOR THIS THING WILL TAKE 700 + shipping
NEXT IS A BRAN NEW TIAL 38MM WG WITH A .4 BAR SPRING, THIS HAS NEVER EVER SEEN BOOST, ITS SILVER, I WANT 200 PLUS SHIPPING.
NEW TIAL 55MM BOV, ITS BLUE, NEVER SEEN BOOST. HAS ALL HARDWARE WITH IT TOO 200 + shipping.
NEW 420A MANI, LOG STYLE NEVER SEEN BOOST, FLANGED FOR A TAIL WG AND HAS A STANDERD T3 FLANGE ON IT....175 + SHIPPING SINCE THE BITCH WEIGHS A TON
OIL KIT, DRAIN FLANGE ECT....60 SHIPPED
T3/T4 GASKET FOR BOLTING UP TO THE MANI...5 BUX PLUS SHIPPING
i also have a bare block, no sensors, freez plugs, just the block, bedplate, and crank had 150k on it when pulled, and still has factory cross hatch in the walls...200 picked up
I will go for 1200 + shipping on everything not including the block
#92389, "RE: FS; Turbo stuff" In response to Reply # 1 May-19-06 02:57 AM by Star Turbo Talon
Are you positive that turbo is ball bearing? 700.00 is a deal but i want to know for sure. I would hate to get wrapped up in this, pull it apart to chk it out to find it has floating bushings.
#92391, "RE: FS; Turbo stuff" In response to Reply # 2
i bought it from a friend of mine, he had all the paper work that came witht the turbo, ther is a sticker on the compressor housing with a ## on it maybe you could call them and check, the the tubine soins liek butter if that helps any....lol
#92392, "RE: FS; Turbo stuff" In response to Reply # 3
as for the manifold, i had guy named robert make it, he is known on these boards, i measured it out when i first got the manifold because i was worried about the same thing and to be hohnest i dont see why it wouldnt fit
#92398, "RE: FS; Turbo stuff" In response to Reply # 4
Originally posted by donnyb373 as for the manifold, i had guy named robert make it, he is known on these boards, i measured it out when i first got the manifold because i was worried about the same thing and to be hohnest i dont see why it wouldnt fit
Yea he sucks at making manifolds. Stupid Choad.
Forget it, the manis are okay I jsut got held up 2 months on my install cause of his stupidity.
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#92403, "RE: FS; Turbo stuff" In response to Reply # 5
what was wrong wiht yours? mine looks good welds look good, the only thing i hate about it is the paint he used to coat it, but that will burn off after some use
#92409, "RE: FS; Turbo stuff" In response to Reply # 1
Originally posted by xcasbonx Have you test fit the manifold with the wastegate? I'm interested, but want to make sure there is hood clearance. http://www.dsmregistry.com/detail.php?carid=1185
I don't like the look of it either, it would definitely not fit with a 2.4 swap, but I am sure that a deltagate or even better, a Turbosmart Streetgate (smallest wastegate evar) would fit comfortably
#92410, "RE: FS; Turbo stuff" In response to Reply # 8
it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it
#92411, "RE: FS; Turbo stuff" In response to Reply # 9
Originally posted by donnyb373 it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it
can you get me a pic of the flange and manifold without the turbo and wastegate on it?
#92416, "RE: FS; Turbo stuff" In response to Reply # 10
Originally posted by BumpinTalon
Originally posted by donnyb373 it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it
can you get me a pic of the flange and manifold without the turbo and wastegate on it?
#92429, "RE: FS; Turbo stuff" In response to Reply # 12
Originally posted by donnyb373
Originally posted by BumpinTalon
Originally posted by donnyb373 it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it
can you get me a pic of the flange and manifold without the turbo and wastegate on it?
Search
Printer-friendly copy
0 Users in Chat
