Me and my family are going through a bit of a finance chrisis and i need to sell some stuff i got laying around, First off i thank anyone who reads this......ok lets start

ALL THESE ITEMS ARE BRAN NEW.........NEVER SEEN BOOST OR DIRT FOR THAT MATTER....LOL

TURBONETICS t3/t4 DUAL CERAMIC BALL BEARING TURBO THE TRIM IS .48 ONTHE HOT SIDE AND 50 ONTHE COLD SIDE. I PAID 1K FOR THIS THING WILL TAKE 700 + shipping

NEXT IS A BRAN NEW TIAL 38MM WG WITH A .4 BAR SPRING, THIS HAS NEVER EVER SEEN BOOST, ITS SILVER, I WANT 200 PLUS SHIPPING.

NEW TIAL 55MM BOV, ITS BLUE, NEVER SEEN BOOST. HAS ALL HARDWARE WITH IT TOO 200 + shipping.

NEW 420A MANI, LOG STYLE NEVER SEEN BOOST, FLANGED FOR A TAIL WG AND HAS A STANDERD T3 FLANGE ON IT....175 + SHIPPING SINCE THE BITCH WEIGHS A TON

OIL KIT, DRAIN FLANGE ECT....60 SHIPPED

T3/T4 GASKET FOR BOLTING UP TO THE MANI...5 BUX PLUS SHIPPING















i also have a bare block, no sensors, freez plugs, just the block, bedplate, and crank had 150k on it when pulled, and still has factory cross hatch in the walls...200 picked up

I will go for 1200 + shipping on everything not including the block

i am in baltimore MD,

Have you test fit the manifold with the wastegate? I'm interested, but want to make sure there is hood clearance.


http://www.dsmregistry.com/detail.php?carid=1185

Are you positive that turbo is ball bearing? 700.00 is a deal but i want to know for sure. I would hate to get wrapped up in this, pull it apart to chk it out to find it has floating bushings.

Terry

i bought it from a friend of mine, he had all the paper work that came witht the turbo, ther is a sticker on the compressor housing with a ## on it maybe you could call them and check, the the tubine soins liek butter if that helps any....lol

as for the manifold, i had guy named robert make it, he is known on these boards, i measured it out when i first got the manifold because i was worried about the same thing and to be hohnest i dont see why it wouldnt fit

Originally posted by donnyb373
as for the manifold, i had guy named robert make it, he is known on these boards, i measured it out when i first got the manifold because i was worried about the same thing and to be hohnest i dont see why it wouldnt fit

Yea he sucks at making manifolds. Stupid Choad.

Forget it, the manis are okay I jsut got held up 2 months on my install cause of his stupidity.

what was wrong wiht yours? mine looks good welds look good, the only thing i hate about it is the paint he used to coat it, but that will burn off after some use

man if that manifold has a standard T3 flange on it, why does your T3/T4 not line up with it? Its not one of those weird universal T3 flanges, is it?

Originally posted by xcasbonx
Have you test fit the manifold with the wastegate? I'm interested, but want to make sure there is hood clearance. http://www.dsmregistry.com/detail.php?carid=1185

I don't like the look of it either, it would definitely not fit with a 2.4 swap, but I am sure that a deltagate or even better, a Turbosmart Streetgate (smallest wastegate evar) would fit comfortably

it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it

Originally posted by donnyb373
it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it

can you get me a pic of the flange and manifold without the turbo and wastegate on it?

I'll pass on the manifold.


http://www.dsmregistry.com/detail.php?carid=1185

Originally posted by BumpinTalon

Originally posted by donnyb373 it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it

can you get me a pic of the flange and manifold without the turbo and wastegate on it?

sure can whats your email?

Originally posted by donnyb373

Originally posted by BumpinTalon

Originally posted by donnyb373 it has a t3/t4 and the old school gm turbo flange on it, i had an old turbo but was upgrading, now i dont need either i need a mitsubishi flang mani for my gt35r, so i never used it

can you get me a pic of the flange and manifold without the turbo and wastegate on it?

sure can whats your email?

bumpin_talon AT hotmail.com

change " AT " to @

ok, fo rthose interested in the turbo

it reads 20357-2 stg II LOT 15, on the hot side

make offers guys i will not turn down a serious offer, my family really needs the cash