I know the porkfooler is out now and it is a great system. But here is for sale a system that requires no shaving of the head and very little work to install. Entire setup is plug and play save for tuning. Manifold was drilled and welded at a local shop. Comes with entire setup minus the 1:1 reg which runs under $120 for the widely used areomotive unit at summit. The truly unique thing about this 034eic controller is that it runs off a three bar map sensor. Unlike the standard 2 bar unit this will allow you to run higher boost levels. Comes with 44lb per hour secondary injectors from accell. A fully wired harness, and mounted fuel rail. I used this setup to run my 2.2L stroker/star stage 2 combo, and it has worked wonderfully up to 18PSi for me. I am upgrading to megasquirt as I need control of the stock area of the fuel curve. I have now increased displacement and decreased compression so the stock fuel maps are not really cutting it. My egt's under ECU control are a little toasty.

I also have for sale a set of injector bosses for anyone who may be in the stages of building their own 8inj setup. So let me know if anyone is intrested...

I edited to the wiki!

how much?

It's going to be in the $500-$550 range for sure. Since this is a 3 bar map sensor and comes with a welded manifold with 44lb secondaries I think it's worth it. The portfuler is a higher price item and this setup will be less involved than the squirt and also less expensive.

I edited to the wiki!