I know the porkfooler is out now and it is a great system. But here is for sale a system that requires no shaving of the head and very little work to install. Entire setup is plug and play save for tuning. Manifold was drilled and welded at a local shop. Comes with entire setup minus the 1:1 reg which runs under $120 for the widely used areomotive unit at summit. The truly unique thing about this 034eic controller is that it runs off a three bar map sensor. Unlike the standard 2 bar unit this will allow you to run higher boost levels. Comes with 44lb per hour secondary injectors from accell. A fully wired harness, and mounted fuel rail. I used this setup to run my 2.2L stroker/star stage 2 combo, and it has worked wonderfully up to 18PSi for me. I am upgrading to megasquirt as I need control of the stock area of the fuel curve. I have now increased displacement and decreased compression so the stock fuel maps are not really cutting it. My egt's under ECU control are a little toasty.

I also have for sale a set of injector bosses for anyone who may be in the stages of building their own 8inj setup. So let me know if anyone is intrested...

how much?

It's going to be in the $500-$550 range for sure. Since this is a 3 bar map sensor and comes with a welded manifold with 44lb secondaries I think it's worth it. The portfuler is a higher price item and this setup will be less involved than the squirt and also less expensive.