2GNT.com Forums - Viewing topic - FS: 500+hp in parts Project Part OUT

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #84018

View in linear mode

Subject: "FS: 500+hp in parts Project Part OUT"

This topic is locked.
Previous topic | Next topic

SILVERNT	Dec-01-05 07:08 AM
Member since Oct 05th 2002 4543 posts,

#84018, "FS: 500+hp in parts Project Part OUT"
Dec-01-05 08:02 AM by SILVERNT

.82ar turbine, .70ar polished and ported compressor Precision Turbo/Garrett GT35/40R Dual Steel ball bearing turbo with 4inch intake pipe/k&n filter, t-bolt clamps, couplers, v-band adapter and downpipe v-band flange (brand new): $1500

Tial 50MM bov, Tial 38/40mm WG 1bar spring (brand new) $400 for both
color is dark black anodized

MCCord electronic exhaust cutout 3inch (brand new) $130

Custom car grills slip on pulley, (brand new)$135

Screamin demon coil used $40

Aeromotive A1000 fuelpump used $200

Aeromotive A1000 filter, steel micron used $75
or $250 for both

Crane Cam Gears for 2.4L swap new $175

2 pod gauge pillar $30

Gauge surround pod (new) $50

56mm TB $75

TurboXS 2 stage boost controller, used $150

Phantom EGT gauge new, needs probe $45

Phantom 0-35psi boost gauge new $35

Megasquirt V2.2 spark/fuel/launch control with harness $250

Aeromotive 1:1 regulator (brand new)with FP gauge $130

95lb PTE Low Impedance Injectors (4 brand new) $300

Apex Pencil turbo timer $75

6 2.5" red 4 ply couplers $50

12 2.5" stainless t-bolt clamps $55

BOTH: $95

Magnaflow Stainless 3inch muffler (brand new) $75

SPEC Stage 5 clutch with upgraded Hi-clamp pressure plate (brand new) $650

Retrofit LSD $325 send a core

2.4L: Crower Rods, Venolia 9.0:1 pistons, srt water pump, srt oil pump, all timing accessories, needs .020 over crank bearings. (Never ran, needs to be assembled) $3250 LOCAL ONLY

ARP Headstuds for 2.4L swap (brand new) $100

Crower Valvesprings (brand new) $115

B&M short Throw shifter used $75

Battery relocation kit: Moroso battery box, moroso kill switch, inline circuit breaker, dist block, $150

Custom HRC FMIC 2.5" in/out (brand new) $700

Sparco Torino racing seats (used) $650 with stock replacement

Rear disc calipers used $75

AEM CAI (used) $50

PRICES DO NOT INCLUDE SHIPPING
ALL PRICES ARE JUST ABOUT DEALER COST
I'm losing enough $ as is on this

Post it up boys, here we go
Chris

If someone wanted to buy everything price would be $8000 FIRM

Report This Post to Admin

Printer-friendly copy | Top

Replies to this topic

RE: FS: 500+hp in parts Project Part OUT, Team

Team

dougie2, Dec-01-05 07:17 AM, #1

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-01-05 07:19 AM, #2

RE: FS: 500+hp in parts Project Part OUT, Team

Team

DR1665, Dec-01-05 07:33 AM, #3

RE: FS: 500+hp in parts Project Part OUT, Team

Team

dougie2, Dec-01-05 08:23 AM, #4

RE: FS: 500+hp in parts Project Part OUT, boosted60trimrst, Dec-01-05 08:42 AM, #5

RE: FS: 500+hp in parts Project Part OUT, dsmmyth, Dec-01-05 07:30 AM, #6

RE: FS: 500+hp in parts Project Part OUT, DarkEclips96, Dec-01-05 07:33 AM, #7

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-01-05 07:50 AM, #8

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-01-05 09:20 AM, #9

RE: FS: 500+hp in parts Project Part OUT, xceler8, Dec-01-05 09:30 AM, #10

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-01-05 09:37 AM, #11

RE: FS: 500+hp in parts Project Part OUT, dsmmyth, Dec-02-05 12:10 PM, #12

RE: FS: 500+hp in parts Project Part OUT, Kirby, Dec-01-05 09:48 AM, #13

RE: FS: 500+hp in parts Project Part OUT, xceler8, Dec-01-05 11:23 AM, #14

RE: FS: 500+hp in parts Project Part OUT, BumpinTalon, Dec-01-05 02:15 PM, #15

RE: FS: 500+hp in parts Project Part OUT, DarkEclips96, Dec-01-05 02:25 PM, #16

RE: FS: 500+hp in parts Project Part OUT, deadclipse, Dec-01-05 03:27 PM, #17

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-02-05 10:45 AM, #18

RE: FS: 500+hp in parts Project Part OUT, xceler8, Dec-03-05 04:15 AM, #19

RE: FS: 500+hp in parts Project Part OUT, djtrickee, Dec-01-05 03:39 PM, #20

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-02-05 10:47 AM, #21

RE: FS: 500+hp in parts Project Part OUT, djtrickee, Dec-02-05 02:29 PM, #22

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-02-05 06:27 PM, #23

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Dec-03-05 04:03 AM, #24

RE: FS: 500+hp in parts Project Part OUT, spawn, Dec-01-05 04:02 PM, #25

RE: FS: 500+hp in parts Project Part OUT, run4cvr, Dec-02-05 08:04 AM, #26

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-02-05 10:49 AM, #27

RE: FS: 500+hp in parts Project Part OUT, xceler8, Dec-02-05 10:59 AM, #28

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-03-05 12:59 PM, #29

RE: FS: 500+hp in parts Project Part OUT, boosted60trimrst, Dec-03-05 04:35 PM, #30

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-05-05 10:10 AM, #31

RE: FS: 500+hp in parts Project Part OUT, Team

Team

DR1665, Dec-05-05 10:33 AM, #32

RE: FS: 500+hp in parts Project Part OUT, xceler8, Dec-05-05 10:49 AM, #33

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Dec-05-05 12:01 PM, #34

RE: FS: 500+hp in parts Project Part OUT, Blizare, Dec-06-05 01:14 PM, #35

RE: FS: 500+hp in parts Project Part OUT, Kirby, Dec-06-05 01:31 PM, #36

RE: FS: 500+hp in parts Project Part OUT, turbo8u, Dec-06-05 05:18 PM, #37

RE: FS: 500+hp in parts Project Part OUT, eclpsmoneypit95, Dec-06-05 07:05 PM, #38

RE: FS: 500+hp in parts Project Part OUT, babybeclipse, Dec-07-05 03:36 AM, #39

RE: FS: 500+hp in parts Project Part OUT, dsmmyth, Dec-07-05 04:06 AM, #40

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-07-05 10:53 AM, #41

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Dec-07-05 10:54 AM, #42

RE: FS: 500+hp in parts Project Part OUT, dsmmyth, Dec-08-05 03:52 AM, #43

RE: FS: 500+hp in parts Project Part OUT, Aggression, Dec-08-05 07:54 AM, #44

RE: FS: 500+hp in parts Project Part OUT, hs_elrod, Dec-09-05 05:10 PM, #45

RE: FS: 500+hp in parts Project Part OUT, Administrator

Administrator

Star Turbo Talon, Dec-10-05 01:04 AM, #46

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Jan-04-06 10:13 AM, #47

RE: FS: 500+hp in parts Project Part OUT, peter2.slow, Jan-04-06 10:37 AM, #48

RE: FS: 500+hp in parts Project Part OUT, DarkEclips96, Jan-04-06 10:49 AM, #49

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Jan-04-06 11:22 AM, #50

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Jan-05-06 05:17 AM, #51

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Jan-05-06 11:06 AM, #52

RE: FS: 500+hp in parts Project Part OUT, SILVERNT, Jan-05-06 07:27 PM, #53

RE: FS: 500+hp in parts Project Part OUT, babybeclipse, Jan-07-06 04:40 AM, #54

RE: FS: 500+hp in parts Project Part OUT, Hult250R, Jan-07-06 05:30 AM, #55

dougie2	Dec-01-05 07:17 AM
Old School 2GNTer 2982 posts,

#84019, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 0

How much will you take for the GT35/40R only? I don't need the pipes, clamps, intake, couplers or anything else... just the turbo. How much for the turbo by itself?

Thanks.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-01-05 07:19 AM
Member since Oct 05th 2002 4543 posts,

#84020, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 1

i cant separate them, id have too hard of a time selling them separately. Thats about $500 in upgrades, im really only charging $150

Report This Post to Admin

Printer-friendly copy | Top

DR1665	Dec-01-05 07:33 AM
Donating 2GNT member 14692 posts,

#84025, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 2

Dibs emoji on the coil. PM sent.

Report This Post to Admin

Printer-friendly copy | Top

dougie2	Dec-01-05 08:23 AM
Old School 2GNTer 2982 posts,

#84030, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 2

Originally posted by SILVERNT
i cant separate them, id have too hard of a time selling them separately. Thats about $500 in upgrades, im really only charging $150

Let me know if you change your mind.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Top

boosted60trimrst	Dec-01-05 08:42 AM
Member since Sep 10th 2005 1183 posts,

#84033, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 4

ill take the coil pack if it didnt sell

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>

http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Report This Post to Admin

Printer-friendly copy | Top

dsmmyth	Dec-01-05 07:30 AM
Member since Aug 24th 2004 1178 posts,

#84022, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 0

Originally posted by SILVERNT
56mm TB $75

Can you give me some more info on this? Thanks.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Originally posted by Kaoz78
Did you happen to look at the post date of this topic? I didn't think so there Jesus. Way to raise Lazarus, buddy.

Report This Post to Admin

Printer-friendly copy | Top

DarkEclips96	Dec-01-05 07:33 AM
Member since May 23rd 2005 399 posts,

#84024, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 6
Dec-01-05 07:35 AM by DarkEclips96

Dibs on egt guage. PM sent

2002 WRX
Eclipse RS-T..sold

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-01-05 07:50 AM
Member since Oct 05th 2002 4543 posts,

#84027, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 6

Originally posted by dsmmyth

Originally posted by SILVERNT 56mm TB $75

Can you give me some more info on this? Thanks.

56mm TB bored out by Fierro Racing www.fierroracing.com

he charges $75 or $85 for just the boring service. EGT was never hooked up, so the plate is spotless

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-01-05 09:20 AM
Member since Oct 05th 2002 4543 posts,

#84034, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 8

cam gears are not for sale
retrofit is not for sale

Report This Post to Admin

Printer-friendly copy | Top

xceler8	Dec-01-05 09:30 AM
Member since Jun 03rd 2005 269 posts,

#84035, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 9

If he doesn't want the throttle body,I call dibs. Which gauge comes witht eh 1:1 (not that it really matters too much), which Sparco Torrinos pictures.

Thanks-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-01-05 09:37 AM
Member since Oct 05th 2002 4543 posts,

#84036, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 10

its just a summitracing screw in

Report This Post to Admin

Printer-friendly copy | Top

dsmmyth	Dec-02-05 12:10 PM
Member since Aug 24th 2004 1178 posts,

#84099, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 10

Originally posted by xceler8
If he doesn't want the throttle body,I call dibs. Which gauge comes witht eh 1:1 (not that it really matters too much), which Sparco Torrinos pictures. Thanks-

Yea, it's not a really priority right now. Just a want. Go ahead. emoji

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Originally posted by Kaoz78
Did you happen to look at the post date of this topic? I didn't think so there Jesus. Way to raise Lazarus, buddy.

Report This Post to Admin

Printer-friendly copy | Top

Kirby	Dec-01-05 09:48 AM
Donating 2GNT member 2181 posts,

#84037, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 8

Calling dibs on the squirt will PM you now.

I edited to the wiki!

Originally posted by DR1665
NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.

Report This Post to Admin

Printer-friendly copy | Top

xceler8	Dec-01-05 11:23 AM
Member since Jun 03rd 2005 269 posts,

#84044, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 13

Still in line for the tb, i'm picky on my gauges, i already ordered a 1:1.

thanks-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Top

BumpinTalon	Dec-01-05 02:15 PM
Member since Mar 23rd 2004 2381 posts,

#84052, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 14

pics of the Tial WG and BOV? when you say 38/40 is that the 38mm body with the 40mm diaphram in it?

1995 Eagle Talon ESi

Report This Post to Admin

Printer-friendly copy | Top

DarkEclips96	Dec-01-05 02:25 PM
Member since May 23rd 2005 399 posts,

#84054, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 15

Ill take the autometer gauge if its a phantom, let me know

2002 WRX
Eclipse RS-T..sold

Report This Post to Admin

Printer-friendly copy | Top

deadclipse	Dec-01-05 03:27 PM
Member since Jul 18th 2005 42 posts,

#84059, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 16

3rd dibs on the coil

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-02-05 10:45 AM
Member since Oct 05th 2002 4543 posts,

#84094, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 15

Originally posted by BumpinTalon
pics of the Tial WG and BOV? when you say 38/40 is that the 38mm body with the 40mm diaphram in it?

this is a pic from tial

correct about the 40mm diaphragm

i forgot to mention, the wastegate comes with 2 stainless steel flanges

Report This Post to Admin

Printer-friendly copy | Top

xceler8	Dec-03-05 04:15 AM
Member since Jun 03rd 2005 269 posts,

#84122, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 6

I guess he doesn't want to sell me the throttle body?

PM sent last time-

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Top

djtrickee	Dec-01-05 03:39 PM
Donating 2GNT member 5924 posts,

#84062, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 0
Dec-01-05 03:42 PM by djtrickee

Whats your wiggle room on the McCord Powerplate?

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-02-05 10:47 AM
Member since Oct 05th 2002 4543 posts,

#84095, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 20

Originally posted by djtrickee
Whats your wiggle room on the McCord Powerplate?

little to none, maybe 1/32 of an inch, theres a bead of heatproof sealant which seals it 99%

the wiring harness also has a quick disconnect feature on it which makes removal easy

Report This Post to Admin

Printer-friendly copy | Top

djtrickee	Dec-02-05 02:29 PM
Donating 2GNT member 5924 posts,

#84101, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 21

Originally posted by SILVERNT

Originally posted by djtrickee Whats your wiggle room on the McCord Powerplate?

little to none, maybe 1/32 of an inch, theres a bead of heatproof sealant which seals it 99% the wiring harness also has a quick disconnect feature on it which makes removal easy

My bad. I was talking about the price. I just checked on their website and they are selling them for $110.00 new and I got them to throw in shipping so disregard this price!
thanks though.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-02-05 06:27 PM
Member since Oct 05th 2002 4543 posts,

#84108, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 22

Originally posted by djtrickee

Originally posted by SILVERNT

Originally posted by djtrickee Whats your wiggle room on the McCord Powerplate?

little to none, maybe 1/32 of an inch, theres a bead of heatproof sealant which seals it 99% the wiring harness also has a quick disconnect feature on it which makes removal easy

My bad. I was talking about the price. I just checked on their website and they are selling them for $110.00 new and I got them to throw in shipping so disregard this price! thanks though.

$115 shipped then?

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Dec-03-05 04:03 AM
Donating 2GNT member 2017 posts,

#84121, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 23

Originally posted by SILVERNT

Originally posted by djtrickee

Originally posted by SILVERNT

Originally posted by djtrickee Whats your wiggle room on the McCord Powerplate?

little to none, maybe 1/32 of an inch, theres a bead of heatproof sealant which seals it 99% the wiring harness also has a quick disconnect feature on it which makes removal easy

My bad. I was talking about the price. I just checked on their website and they are selling them for $110.00 new and I got them to throw in shipping so disregard this price! thanks though.

$115 shipped then?

PM Sent about the cutout

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

spawn	Dec-01-05 04:02 PM
Member since Jul 08th 2003 33 posts,

#84064, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 0

how much for the custom passenger side motor mount??? i would be interested in buying that.. possibly the oil pan if it is modded too..

holla back

Save a tree... SMOKE A HONDA!!!

Report This Post to Admin

Printer-friendly copy | Top

run4cvr	Dec-02-05 08:04 AM
Donating 2GNT member 2477 posts,

#84084, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 25

PM sent.

John 96 GS

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-02-05 10:49 AM
Member since Oct 05th 2002 4543 posts,

#84096, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 25

Originally posted by spawn
how much for the custom passenger side motor mount??? i would be interested in buying that.. possibly the oil pan if it is modded too.. holla back

there was no motor mount ever made, same with oilpan.

all i am selling is a shortblock with all waterpump/oilpump/timing accessories/upper and lower gaskets

Report This Post to Admin

Printer-friendly copy | Top

xceler8	Dec-02-05 10:59 AM
Member since Jun 03rd 2005 269 posts,

#84097, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 27

How about that 56" throttle body buddy?
Let me know I got $$$$

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-03-05 12:59 PM
Member since Oct 05th 2002 4543 posts,

#84141, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 28

Originally posted by xceler8
How about that 56" throttle body buddy? Let me know I got $$$$

PM sent

Report This Post to Admin

Printer-friendly copy | Top

boosted60trimrst	Dec-03-05 04:35 PM
Member since Sep 10th 2005 1183 posts,

#84153, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 29

whats up with the coil pack . is it sold yet . ill pay you right away

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>

http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-05-05 10:10 AM
Member since Oct 05th 2002 4543 posts,

#84240, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 30

Originally posted by boosted60trimrst
whats up with the coil pack . is it sold yet . ill pay you right away

coilpack sold

egt pending

tb sold

Report This Post to Admin

Printer-friendly copy | Top

DR1665	Dec-05-05 10:33 AM
Donating 2GNT member 14692 posts,

#84241, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 31

Originally posted by SILVERNT

Originally posted by boosted60trimrst whats up with the coil pack . is it sold yet . ill pay you right away

coilpack sold

Yeah. That's right, bitches. LOL. Mine.

Report This Post to Admin

Printer-friendly copy | Top

xceler8	Dec-05-05 10:49 AM
Member since Jun 03rd 2005 269 posts,

#84242, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 32

Yeah, well, I'm getting the tb,so suck it trebeck!

Fully Built MS powered 99' GS Sport, Garrett T3/T04e 60 trim with one big ass intercooler!

Yeah, she runs...sorta!

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Dec-05-05 12:01 PM
Donating 2GNT member 2017 posts,

#84244, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 33

cut-out sold, payment sent emoji

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

Blizare	Dec-06-05 01:14 PM
Donating 2GNT member 7595 posts,

#84274, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 34

I want the Megasquirt. Will you ship to Canada Chris?

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

Report This Post to Admin

Printer-friendly copy | Top

Kirby	Dec-06-05 01:31 PM
Donating 2GNT member 2181 posts,

#84278, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 35
Dec-06-05 01:40 PM by Kirby

Originally posted by Blizare
I want the Megasquirt. Will you ship to Canada Chris?

Sorry maple leaf, sold to me payment sent..

Edit make that "sorry canuckulehead, sold to me payment sent.."

I edited to the wiki!

Originally posted by DR1665
NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.

Report This Post to Admin

Printer-friendly copy | Top

turbo8u	Dec-06-05 05:18 PM
Member since Jun 15th 2003 10552 posts,

#84295, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 36

damn chris, why the change of heart? SO close...yet so far emoji

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX

"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Report This Post to Admin

Printer-friendly copy | Top

eclpsmoneypit95	Dec-06-05 07:05 PM
Member since Mar 09th 2005 371 posts,

#84304, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 37

PM sent regarding shifter

That blue car got me boobies once

Report This Post to Admin

Printer-friendly copy | Top

babybeclipse	Dec-07-05 03:36 AM
Member since Mar 01st 2002 3083 posts,

#84308, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 38

What's left cheif?

Report This Post to Admin

Printer-friendly copy | Top

dsmmyth	Dec-07-05 04:06 AM
Member since Aug 24th 2004 1178 posts,

#84310, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 36
Dec-07-05 04:16 AM by dsmmyth

Originally posted by Kirby

Originally posted by Blizare I want the Megasquirt. Will you ship to Canada Chris?

Sorry maple leaf, sold to me payment sent.. Edit make that "sorry canuckulehead, sold to me payment sent.."

Lol, that's wrong.

What color and application is that AEM CAI? Thanks.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Originally posted by Kaoz78
Did you happen to look at the post date of this topic? I didn't think so there Jesus. Way to raise Lazarus, buddy.

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-07-05 10:53 AM
Member since Oct 05th 2002 4543 posts,

#84323, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 40
Dec-07-05 10:55 AM by SILVERNT

Garrett GT35/40R PENDING

Tial 50MM bov, Tial 38/40mm WG PENDING

Custom car grills slip on pulley, (brand new)$135

Aeromotive A1000 fuelpump used $200

Aeromotive A1000 filter, steel micron used $75
or $250 for both

2 pod gauge pillar $30

Gauge surround pod (new) $50

TurboXS 2 stage boost controller, used $150

Phantom 0-35psi boost gauge new $35

Aeromotive 1:1 regulator (brand new)with FP gauge $130

95lb PTE Low Impedance Injectors (4 brand new) $300

Apex Pencil turbo timer $75

6 2.5" red 4 ply couplers $50

12 2.5" stainless t-bolt clamps $55

BOTH: $95

Magnaflow Stainless 3inch muffler (brand new) $75

SPEC Stage 5 clutch with upgraded Hi-clamp pressure plate (brand new) $650

2.4L: Crower Rods, Venolia 9.0:1 pistons, srt water pump, srt oil pump, all timing accessories, needs .020 over crank bearings. (Never ran, needs to be assembled) $3250 LOCAL ONLY

ARP Headstuds for 2.4L swap (brand new) $100

Crower Valvesprings (brand new) $115

B&M short Throw shifter used $75 PENDING

Battery relocation kit: Moroso battery box, moroso kill switch, inline circuit breaker, dist block, $150

Custom HRC FMIC 2.5" in/out (brand new) $700

Sparco Torino racing seats (used) $650 with stock replacement

Rear disc calipers used $75

AEM CAI (used) $50

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Dec-07-05 10:54 AM
Member since Oct 05th 2002 4543 posts,

#84324, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 40

Originally posted by dsmmyth

Originally posted by Kirby

Originally posted by Blizare I want the Megasquirt. Will you ship to Canada Chris?

Sorry maple leaf, sold to me payment sent.. Edit make that "sorry canuckulehead, sold to me payment sent.."

Lol, that's wrong. What color and application is that AEM CAI? Thanks.

silver, for 95-99 MT eclipse/talon/avenger

filter is a Green filter. www.greenfilters.com

Report This Post to Admin

Printer-friendly copy | Top

dsmmyth	Dec-08-05 03:52 AM
Member since Aug 24th 2004 1178 posts,

#84347, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 42

Originally posted by SILVERNT

Originally posted by dsmmyth

Originally posted by Kirby

Originally posted by Blizare I want the Megasquirt. Will you ship to Canada Chris?

Sorry maple leaf, sold to me payment sent.. Edit make that "sorry canuckulehead, sold to me payment sent.."

Lol, that's wrong. What color and application is that AEM CAI? Thanks.

silver, for 95-99 MT eclipse/talon/avenger filter is a Green filter. www.greenfilters.com

PM sent.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Originally posted by Kaoz78
Did you happen to look at the post date of this topic? I didn't think so there Jesus. Way to raise Lazarus, buddy.

Report This Post to Admin

Printer-friendly copy | Top

Aggression	Dec-08-05 07:54 AM
Old School 2GNTer 3025 posts,

#84355, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 43

let me know about the B&M shifter.

--------------------

- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

Report This Post to Admin

Printer-friendly copy | Top

hs_elrod	Dec-09-05 05:10 PM
Member since Aug 26th 2004 159 posts,

#84399, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 44

Has the Screamin Demon coil gone yet?
how much shiooed to 37013

I'm a novice listen to what I say and make your own conclusion.

Report This Post to Admin

Printer-friendly copy | Top

Star Turbo Talon	Dec-10-05 01:04 AM
Member since Oct 21st 2003 8331 posts,

#84401, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 45

Originally posted by hs_elrod
Has the Screamin Demon coil gone yet? how much shiooed to 37013 I'm a novice listen to what I say and make your own conclusion.

did you not read the thread....it was sold and sent

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Jan-04-06 10:13 AM
Donating 2GNT member 2017 posts,

#85375, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 46

Anyone That bought parts got them yet?
I sent payment Dec. 10th, still no cut-out, I cant get ahold of Chris either...

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

peter2.slow	Jan-04-06 10:37 AM
Member since May 24th 2005 108 posts,

#85378, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 47

I would like the Boost controller and Surrond gauge pod. Please email me at ckypeter2000@yahoo.com

Report This Post to Admin

Printer-friendly copy | Top

DarkEclips96	Jan-04-06 10:49 AM
Member since May 23rd 2005 399 posts,

#85379, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 48

Yea guys, I got ahold of him, he has some personal issues, believe they are going out now. I ordered a EGT gauge. So im guessing we will get the stuff soon.

2002 WRX
Eclipse RS-T..sold

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Jan-04-06 11:22 AM
Donating 2GNT member 2017 posts,

#85381, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 49

Originally posted by DarkEclips96
Yea guys, I got ahold of him, he has some personal issues, believe they are going out now. I ordered a EGT gauge. So im guessing we will get the stuff soon.

O ok... Hopefully, Lol
I know Chris, I was just getting a little worried.
I lost his phone number so I didnt have any other way of getting ahold of him.

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Jan-05-06 05:17 AM
Member since Oct 05th 2002 4543 posts,

#85416, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 50

sorry guys, everything is straightened out. everything has shipped today. luke i sent you a christmas card too, lol

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Jan-05-06 11:06 AM
Donating 2GNT member 2017 posts,

#85426, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 51

Originally posted by SILVERNT
sorry guys, everything is straightened out. everything has shipped today. luke i sent you a christmas card too, lol

Lol Sweet

Lil late though...
Ill be sure to bring you a Guinness next time im up youre way

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

SILVERNT	Jan-05-06 07:27 PM
Member since Oct 05th 2002 4543 posts,

#85455, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 52

Originally posted by Hult250R

Originally posted by SILVERNT sorry guys, everything is straightened out. everything has shipped today. luke i sent you a christmas card too, lol

Lol Sweet

Lil late though... Ill be sure to bring you a Guinness next time im up youre way

speaking of which i was debating a small bbq really soon, just an idea

Report This Post to Admin

Printer-friendly copy | Top

babybeclipse	Jan-07-06 04:40 AM
Member since Mar 01st 2002 3083 posts,

#85520, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 53

Originally posted by SILVERNT

Originally posted by Hult250R

Originally posted by SILVERNT sorry guys, everything is straightened out. everything has shipped today. luke i sent you a christmas card too, lol

Lol Sweet

Lil late though... Ill be sure to bring you a Guinness next time im up youre way

speaking of which i was debating a small bbq really soon, just an idea

You just read my mind lol

Hey still have one of those seats?

Report This Post to Admin

Printer-friendly copy | Top

Hult250R	Jan-07-06 05:30 AM
Donating 2GNT member 2017 posts,

#85521, "RE: FS: 500+hp in parts Project Part OUT"
In response to Reply # 54

This thread has De-Railed but ya a BBQ sounds cool

----------------------------------------

I used to have a 420A...

'92 TSi AWD

11.8 @ 119mph
470awhp 405 ft/lb torque
30psi on E85 w/ Borg Warner S256 Turbo

My DSM Registry: http://www.dsmregistry.com/166

Report This Post to Admin

Printer-friendly copy | Top

Top

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #84018

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.107 seconds, executing 124 queries.