hey guys, bastard mechanic fixed a nut but then bent the crap out of the stud that runs parallel to the pulley and is about 4" long and is threaded all the way and is reverse thread. i dont have a local satan and so if anyone could get a hold for 1 for me itd be highly appreciated. just ring me up thx
#55625, "RE: idler pulley bolt (reverse thread)" In response to Reply # 2
broke teh digi cam so if someone else knows what it is thats be bad ass, and how i get a hold of Mr Bob Kise?, theres a small handful of lil gay things i need from Satan. thx
#55669, "RE: idler pulley bolt (reverse thread)" In response to Reply # 3
ok, for all your idler pully problems...here's a solution
YOU DONT NEED THE IDLER PULLEY!!!!!
just remove the whole assembly (just leave the bracket on the motor), and buy a 47" 5 ribbed belt. loosen your power steering pump and push it towards the firewall. route the belt around the crank pulley, a/c pulley and p/s pulley. then use a pry bar to push the p/s pump towards the front of the car, tighten the bolts, and you're good to go!!!!!
that pulley is useless and has caused more problems on our cars than anything else....ive gone through 3 of em at 120 bones a piece before i figured this out
good luck...
my car is for sale...check the thread in this board
#55671, "RE: idler pulley bolt (reverse thread)" In response to Reply # 4
Originally posted by MitsuNiko99 ok, for all your idler pully problems...here's a solution YOU DONT NEED THE IDLER PULLEY!!!!! just remove the whole assembly (just leave the bracket on the motor), and buy a 47" 5 ribbed belt. loosen your power steering pump and push it towards the firewall. route the belt around the crank pulley, a/c pulley and p/s pulley. then use a pry bar to push the p/s pump towards the front of the car, tighten the bolts, and you're good to go!!!!! that pulley is useless and has caused more problems on our cars than anything else....ive gone through 3 of em at 120 bones a piece before i figured this out good luck... my car is for sale...check the thread in this board niko
good tip imo
I eat emo kids for breakfast
1995 Eagle Talon (SOLD) 72' SuperBeetle 72' Standard Beetle 56' Deluxe Beetle
#55691, "RE: idler pulley bolt (reverse thread)" In response to Reply # 5
well i agree, but would i still use that sized belt for my unorthodox udp? ill do that next time but i already have the belt and crap, alls i need si this damned bolt.
Search
Printer-friendly copy
1 User in Chat
thx
