Parting out my 1996 eagle talon. Besides all of the basics that are in the car I have the Following:

Pilot Strut Tower Bars
KYB AGX Struts(rear)
Sprint Lowering Springs
17*7 5Zigen White Fireballs w/Nitto 555 235/45/17 up front /nitto 455 215/45/17 in rear-Nitto 455's need to be replaced.
Rear Disc Conversion
All Powersteering and A/C Parts
Car has not been wrecked so all the body and suspension you could want
95 Eclipse GS-t Hatch and spoiler
True Carbon fiber 3 way adjustable spoiler
Blitz Side Skirts
New Sensors and PCM
Interior is Gray/Exterior is Red

you got mail! interested in interior peices.

1995 Eclipse RS

how about the tensioner pulley bracket. i need that bastard. and also how much for the strut tower brace

does it have a sunroof? if so ill take the sunroof motor asap

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

how much for the gst spoiler?

Don't work for the system, Let the system work for you.

I have a tensioner from a neon block. Should be the same. Pay shipping and its yours. I will sell both strut tower braces for $50

No Sunroof sorry.

Would you want the entire hatch with the spoiler(Just easier that way)?



FYI Entire Rolling Chassis For $1000 w/wheels $1400

How much for the power steering pump and front passenger side fender well?

USMC Semper Fi

how much for the rear disc conversion? very interested

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

did you blow the motor? If not can I have it.

I am parting out my 95 RS!!!

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=49&topic_id=3652&mode=full

No i didn't blow it, I am swapping it to a neon. but if you want I have the neon engine with a spun rod bearing if you want part or all of it.

Power Steering Pump...Make an offer... Fender well as in the plastic piece or which part?

Rear disc conversion...Not sure It cost me somewhere around $300 or more??? Um make an offer on that too

damnit turby, i want the rear disks!

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

well you can make an offer as well

100 shipped?

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Well I would have to check on shipping, but I am going to say you would need to make a better offer than that.

i have the tensioner pulley but the adjusting screw on the actually bracket broke. so if you can get the entire bracket with or without pulley its cool. what would shipping be for braces and that to 68504

need a altenator bracket, how much for your springs? what kinda drop?

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Ya I have an extra alternator bracket, the springs are Sprint Blues, so I believe 2inch drop? How about $40 plus whatever shipping is to you for the bracket and Springs.




I will have to check about the strut tower braces for shipping-I can get you that bracket and bolt, but from what I understand, that is something you want to replace new. Not worth breaking a timing belt. If you still want it though, I can get you it.

the tensioner bracket has a bolt on it that you can adjust to move the pulley towards the motor or away. the bolt is what i broke off so i need the entire bracket. pulley to if you want to include it

Ground Shipping should be between $10 and $15 for the braces

If available...

I need the radio mounting cage(brackets on side) and plastic pocket underneath the radio.

(my stereo was stolen and they took the entire assembly, fucking crooks)

Please let me know how much with shipping to zip 19701

email me at:

philcav7@yahoo.com

Thanks.

Sorry but mine got stolen 3 times so I finally never fixed the problem and just had no radio for the last year.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

was wondering hi or low blitz side skirts and how much for them with shipping to sa,tx 78237. also if you have any pics please send them to satal95@yahoo.com

Interested in driver side fender. What color? Price? sean.leonard@adelphia.net