| Go back to previous topic |
| Forum name | 2GNT Buy / Sell / Trade (BST) |
| Topic subject | Parting out Car |
| Topic URL | https://forums.2gnt.com/dcboard.php?az=show_topic&forum=i16&topic_id=52006 |
52006, Parting out Car Posted by Therein10, Aug-11-04 09:03 AM
Parting out my 1996 eagle talon. Besides all of the basics that are in the car I have the Following:
Pilot Strut Tower Bars KYB AGX Struts(rear) Sprint Lowering Springs 17*7 5Zigen White Fireballs w/Nitto 555 235/45/17 up front /nitto 455 215/45/17 in rear-Nitto 455's need to be replaced. Rear Disc Conversion All Powersteering and A/C Parts Car has not been wrecked so all the body and suspension you could want 95 Eclipse GS-t Hatch and spoiler True Carbon fiber 3 way adjustable spoiler Blitz Side Skirts New Sensors and PCM Interior is Gray/Exterior is Red
|
52009, RE: Parting out Car Posted by coppereclipse95, Aug-11-04 09:18 AM
you got mail! interested in interior peices.
|
52010, RE: Parting out Car Posted by kelvinb1, Aug-11-04 09:19 AM
how about the tensioner pulley bracket. i need that bastard. and also how much for the strut tower brace
|
52012, RE: Parting out Car Posted by Weezle745, Aug-11-04 09:40 AM
does it have a sunroof? if so ill take the sunroof motor asap
|
52013, RE: Parting out Car Posted by WarnerC, Aug-11-04 09:41 AM
how much for the gst spoiler?
|
52015, RE: Parting out Car Posted by Therein10, Aug-11-04 09:49 AM
I have a tensioner from a neon block. Should be the same. Pay shipping and its yours. I will sell both strut tower braces for $50
No Sunroof sorry.
Would you want the entire hatch with the spoiler(Just easier that way)?
FYI Entire Rolling Chassis For $1000 w/wheels $1400
|
52067, RE: Parting out Car Posted by blckeclipse95, Aug-11-04 03:56 PM
How much for the power steering pump and front passenger side fender well?
|
52074, RE: Parting out Car Posted by turbo8u, Aug-11-04 04:44 PM
how much for the rear disc conversion? very interested
|
52089, RE: Parting out Car Posted by LeJeune123, Aug-11-04 06:57 PM
did you blow the motor? If not can I have it.
|
52092, RE: Parting out Car Posted by Therein10, Aug-11-04 07:01 PM
No i didn't blow it, I am swapping it to a neon. but if you want I have the neon engine with a spun rod bearing if you want part or all of it.
|
52090, RE: Parting out Car Posted by Therein10, Aug-11-04 06:58 PM
Power Steering Pump...Make an offer... Fender well as in the plastic piece or which part?
Rear disc conversion...Not sure It cost me somewhere around $300 or more??? Um make an offer on that too
|
52091, RE: Parting out Car Posted by 420AYE, Aug-11-04 07:01 PM
damnit turby, i want the rear disks!
|
52093, RE: Parting out Car Posted by Therein10, Aug-11-04 07:02 PM
well you can make an offer as well
|
52096, RE: Parting out Car Posted by 420AYE, Aug-11-04 07:29 PM
100 shipped?
|
52120, RE: Parting out Car Posted by Therein10, Aug-12-04 05:52 AM
Well I would have to check on shipping, but I am going to say you would need to make a better offer than that.
|
52135, RE: Parting out Car Posted by kelvinb1, Aug-12-04 09:42 AM
i have the tensioner pulley but the adjusting screw on the actually bracket broke. so if you can get the entire bracket with or without pulley its cool. what would shipping be for braces and that to 68504
|
52136, RE: Parting out Car Posted by widebodied, Aug-12-04 09:45 AM
need a altenator bracket, how much for your springs? what kinda drop?
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
 2000 Yamaha R-1, 165rwhp 117 ftlbs tq
 ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
|
52137, RE: Parting out Car Posted by Therein10, Aug-12-04 09:52 AM
Ya I have an extra alternator bracket, the springs are Sprint Blues, so I believe 2inch drop? How about $40 plus whatever shipping is to you for the bracket and Springs.
I will have to check about the strut tower braces for shipping-I can get you that bracket and bolt, but from what I understand, that is something you want to replace new. Not worth breaking a timing belt. If you still want it though, I can get you it.
|
52138, RE: Parting out Car Posted by kelvinb1, Aug-12-04 09:55 AM
the tensioner bracket has a bolt on it that you can adjust to move the pulley towards the motor or away. the bolt is what i broke off so i need the entire bracket. pulley to if you want to include it
|
52141, RE: Parting out Car Posted by widebodied, Aug-12-04 10:06 AM
Originally posted by Therein10 Ya I have an extra alternator bracket, the springs are Sprint Blues, so I believe 2inch drop? How about $40 plus whatever shipping is to you for the bracket and Springs. I will have to check about the strut tower braces for shipping-I can get you that bracket and bolt, but from what I understand, that is something you want to replace new. Not worth breaking a timing belt. If you still want it though, I can get you it.
sure can u ship today, u have a pm
DWAYNE H 1996 eclipse under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job
 2000 Yamaha R-1, 165rwhp 117 ftlbs tq
 ALMOST THERE...... MUWHAHAHAHAHAHA
Originally posted by Thunderous_Talon a man could build a thousand bridges, and suck one cock. he'll forever be known as a cocksucker.
|
52306, RE: Parting out Car Posted by kelvinb1, Aug-14-04 08:47 AM
Originally posted by Therein10 I will have to check about the strut tower braces for shipping-I can get you that bracket and bolt, but from what I understand, that is something you want to replace new. Not worth breaking a timing belt. If you still want it though, I can get you it.
any prices yet? ill have to take a pic of what i need i guess. all it does is provide tension on the a/c ps side. it bolts to the block. the bolt that broke off is the one that you adjust the tension
|
52239, RE: Parting out Car Posted by Therein10, Aug-13-04 08:15 AM
Ground Shipping should be between $10 and $15 for the braces
|
52262, RE: Parting out Car Posted by philcav7, Aug-13-04 12:45 PM
If available...
I need the radio mounting cage(brackets on side) and plastic pocket underneath the radio.
(my stereo was stolen and they took the entire assembly, fucking crooks)
Please let me know how much with shipping to zip 19701
email me at:
philcav7@yahoo.com
Thanks.
|
52268, RE: Parting out Car Posted by Therein10, Aug-13-04 02:20 PM
Sorry but mine got stolen 3 times so I finally never fixed the problem and just had no radio for the last year.
|
52269, RE: Parting out Car Posted by Sorry_i_Win, Aug-13-04 02:25 PM
Originally posted by philcav7If available... I need the radio mounting cage(brackets on side) and plastic pocket underneath the radio. (my stereo was stolen and they took the entire assembly, fucking crooks) Please let me know how much with shipping to zip 19701 email me at: philcav7@yahoo.com Thanks.
well... since he doesn't have it, I do as long as it isn't sold yet to another 2gntr yet.. $15 shipped for them.
Link to pics of the brackets:
http://forums.2gnt.com/dcboard.php?az=show_mesg&forum=16&topic_id=51791&mesg_id=52255&page=
|
52287, RE: Parting out Car Posted by satal95, Aug-14-04 03:45 AM
was wondering hi or low blitz side skirts and how much for them with shipping to sa,tx 78237. also if you have any pics please send them to satal95@yahoo.com
|
52348, RE: Parting out Car Posted by CarbonFiberRST, Aug-14-04 09:48 PM
Interested in driver side fender. What color? Price? sean.leonard@adelphia.net
|