I am going to be selling the VT shortblock out of my 97eclipse. It has .020 JE pistons and eagle rods. Clevett main and rod bearings, balanced and blueprinetd.. If any one is interested hit me up. It has aprox 20k miles wet comp test showed 225 across the board. I need to make room for the 2.4.

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...
www.cnnmotorsports.com

950 dollah! like i said. you should finance me


ttt

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

what do they go for and how much are you looking at getting for it? It may cost an arm and a leg to ship it out to me though...

William 'Tha.Will' McGroarty

~*Roary*~
Sick Skillz

First 1300+shipping gets it

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...
www.cnnmotorsports.com

damn you.....damn you....damn youuuuuu.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

I am interested.
but $1300 + shipping for a 20K miles engine?? hum.... I was thinking like $600... (sorry if I sound like a low baller)

But I can get a Brand new from VT for $1600 + Shipping.
Just a thought.

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

where?

if your going to sell that block for 600, it is sold to me man....lol..

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Took a ride with this motor still in. Pulls hard and feels solid. To me it makes you feel like you can do anything you want to it and not worry about a rod poking your eye out. Wish I could but it but the only thing I could afford right now is a vouch. Solid motor that wont crap out of you from a trusting guy = worth the asking price

i'd give good money for it. but i only got 900 right now. and i don't get paid for a week. and even then, i dunno if i could buy it. maybe in 3 weeks.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

I like how every one thinks how they can get an engine for $1600 from vt. First off they are like $1700+ now and mine when it was done came to like almost $1700. Second you are going to have to pay $150 to ship your shit there and $150 to have it shipped back. Then you have the cost of a spare block and crank. So now you are at 2100+ dollars. I would rather use this engine as an anchor then sell it for 600 bucks. Sorry but get realistic people..

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...
www.cnnmotorsports.com

no you wouldn't.... :-D just you wait...just wait. i will have monies...

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

i believe they are up to 1800 now. or maybe still at 1745. plus around 180 or so to ship it. now th eone i got i had crower rods put in instead of of the eagles and it was an extra 500. so i paid like 2345 for mine. either way asking 600 for a built block that cost 1800 brand new... little low. i think his 1300 is about what he should be asking. maybe a bit lower but not much less than say 1200.

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

just wiat....someone will buy it... give me 3 weeks or so and it will be me.....

ttt

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

Id kill for it, just cant quite afford it.... Hopefully deals on built blocks keep coming up cause Ill be ready in the coming months

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Well forget me selling it for 1300. Anyone want it for $1100 as is? Still had good compression and not cylinder wall damage. Detonantion is my friend and started pitting my pistons right near the intake valves. The head has some too but not bad at all. Wow this sucks ass. Might part her out now... Stay tuned

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...
www.cnnmotorsports.com

if you part out, i will snake the rods, pistons and crank.

you might as well buy the whole motor. your going to pay at least 500 for what you want and another 500 at the machine shop to install, I dont see what you are thinking man.

Terry

96 Eagle talon ESI
Greddy header - Greddy exhaust

97 Eclipse
Star Stage II - Boost/oil/EGT gauges - Apexi N1 3" exhaust - SFMU/return line - Apexi SAFC - Stage 2 6 puck Sprung hub MIBA clutch - Shortened shifter - Koni Yellows w/eibach prokit - Stillen Fr/Rr swaybars - ceramic intake - DEI Keyless entry alarm - Niche 17" Shoks

Waiting to be installed: HKS EVC IV, 450 Turbo injectors, GSX Front brakes (need rotors)

Mitchell on Demand copies available

short block is still forsale. I have pictures if you are interested.

best time so far 14.3 @ 101.1mph(no traction)
fastest 2GNT with a hitch! until proven wrong...
www.cnnmotorsports.com

1100? its getting very close....

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.