hello fellows, long time no see do some illness that ive had, and trying to get my life together.

pretty much heres the deal, this is a hybrid 420a motor, for those of you that dont know, research!

Parts list;
j.e pistons & rings & T-2 rods  $ 750
Main bearings and rod bearings, gaskets,
Melling oil pump . 394
Blackdog cam belt tensioner .. 50
Crankshaft (good used) .. 200
Crane #16 cams .. 395
Crane valve springs  95
SI stainless steel valves .. 280
ARP head stud kit w/ nuts and hardened washers 125
S16g converted to a S20g 450
** parts total  $ 2739
Tax on parts  103
Parts and tax totals .. $ 2848

Machine and labor charges;
Dismantle and clean used engine ( rusted)  $ 150
Bore and hone block, + .020 over  80
Deck the block surface, smooth surface .. 50
Polish crankshaft  25
Balance the complete engine assembly  175
Blue-print and assemble the lower end .. 350
Cut valve seats for larger valves . 160
Port and polish the head, match gaskets . 350
Competition Valve job, 5 angle radius seats . 350
Mill head surface to clean and smooth, .. 50
Clean and assemble head, set spring pressures 65
Install head on block, torque in place ........ 80
Degree in cams and set up tensioner assembly 65
Wrap and protect engine in crate for transport. 80
** labor and machine work totals  $ 1885

Estimated total for the engine upgrade and misc .. $ 5323

this motor has 0 miles, never been started just installed, this may sound stupid, or odd, but im leaning on going back to the 2.0 why, because, i have enough fast toys, i dont need more, this engine on the street,probaly is more violent than useful, exspecially in 1-3rd gear. im leaning towards a basic fully built 2.0 setup with turbo kit.the engine has been built to spin 8500 rpms on a daily basis and to support up 550 whp.

i will sell this motor out right for 5000 obo. i will trade the motor for a fully built 2.0 with full turbo kit and fmic. with this motor i will include a hrc manny and brand new s20g turbo. this is for someone that knows the 420a and the eclipse not intended for rookies. i will try to locate pics


DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Bleh going back to the mild side??

I was looking forward to see what kind of numbers it produced...and this means that 2.4 swapers are becoming exctinct lol

vote for your choice of body style for Bluie!! http://www.cardomain.com/id/bluemooneclipse

Tis a sad day in the world of 2.4L swappers...

Originally posted by Initial DSM
Tis a sad day in the world of 2.4L swappers...

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Originally posted by Initial DSM

Originally posted by turbo8u

Originally posted by Initial DSM Tis a sad day in the world of 2.4L swappers...

not really

Why? Your'e buying it?

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Dude, it's been 4 months since I sent you PayPal for the rear wiper arm... WTF?!?

i know dougie, ive been down for a few a months and out of cpu, my girl sent out but shortley came back with a wrong address, gimme your address again, or if u dont need it, ill send you your 10 or 15 buxs back, with interest if needed, thanks

and turb8u? dont whore my thread noobie, if you dont know what it is, research, this motor not by any means is weak, and your looking at over 6k to duplicate. do your research, bstockums head weak? or his block weak? pssh he has a 12 second pt cruiser go figure. this isnt some backyard 1 year project motor, this is the real deal.

btw, i thought you was building a 2.4, and you dont even know what a blackdog cam tensioner is? id think about a different route if i was you.

My address is:

Doug Lincicome
2000 Mallory Lane
Suite 130
Franklin, TN 37067

I hope to see it very soon. Thanks.

cam belt? we don't have cam belts. what are you guys talking about. we have a TIMING BELT. even at that, it doesn't even touch the cams. cam GEARS.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

bro im not gonna bicker and whore my thread up with a noob, yea i paid around 5gs for a bomb proof block, so what, what the fuck is 5gs, your acting like thats alot of money or something for a motor of this quality. 1000 buxs to build a bottom end pfff, theres 3000 in the head and parts, cali boy, you have no idea the extent and professionalism of the engine, so you let your 10.1 comp, and 2.6 liter sit in your basement, and collect dust, i sure hope you dont plan on running that motor for long periods of time. but youll learn,,, noob, or and us old folks call it a cam belt tensioner youngin.

btw edit, im actualy using the srt tensioner, but the blackdog tensioner will be included.

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

Number one, no one is going to buy a 5k dollar motor here, we scrounge around for cheapity cheap stuff.

Number two, why would anyone buy from you..your whoring YOUR OWN thread with nOOb bashing(sorry turby ) Poor customer relations, tisk tisk

IMO part the motor out, you'll sell the parts before you sell the entire thing

Aem Cold Air AFX 55mm TB
Fidanza Cam Gears NGK Wires
AFX UDP Greddy Header
Gutted Cat Greddy Evo Catback
Energy Suspension MMI Eibach Sportlines
Tokico Blues...always more to come

just remember, ive schooled you before you even thought of a 2.4 remember that. look at your feedback you left, ive been doing this before you ever thought about a 2.4 my motor is in an ready to go, why havent i started it, because i dont have time to do the ends and outs and tuning. im pretty much fading out of this scene, ive then made my mark on the east coast show circuit, and drag strips, and im giving it up, why, because im tired of working on it, and i just purchased a 2004 g35 which i also purchased a greddy tt for it, so you think im still trying to go all out on a car that has a book value of 4000.

this motor is for someone that wants to go all out balls to the wall crazy with a monster turbo setup. all i did on here was ask was anybody interested in going that route, because if you are heres a good deal for you, im willing to trade someone a rtr 2.4 for a built 2.0 with turbo kit.

if you didnt have any interest shouldve never posted, the 5000 has obo beside so offers are welcome. btw the entire car is for sale, 10000 firm for the car firm without the motor, 14,500 with motor. neg. email for details and pics if interested

the reason i said youngin is because you act like 16 year old si boy btw im 21

DWAYNE H
2004 infiniti g35 just purchased, greddy tt on the way!
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

If the car has a book value of $4000 why are you tring to get $10000 out of it? Without the 2.4?

bah, im 21 son. Im sure you two can fight this out over a pm or something, leave the childishness at the door. Now on with the selling!

Aem Cold Air AFX 55mm TB
Fidanza Cam Gears NGK Wires
AFX UDP Greddy Header
Gutted Cat Greddy Evo Catback
Energy Suspension MMI Eibach Sportlines
Tokico Blues...always more to come

This is one of the sickest cars on 2GNT. Turby, shame on you, I cant believe youre arguing
5k sounds like alot, but if you look at it, Suieclipse is selling his even more, but just breaking up the two ($3500 turbo kit, $2500 motor). And this engine is brand new.
Good luck in selling the car.

im sure turby knows its a cool car. but he has to stand up for himself right? i would say that this could be a reasonable deal, because hardly anyone can get hooked up like turby.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.