Wilwood 4 piston calipers, 13" 2 piece rotors. used only about 600-700 miles. pads are in excellent shape and have a ton of pad left.

$600 shipped

do you do escrow?

no, sorry. I take Paypal though.

I sent ya an email

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

"Mommy financed...Mommy certified"

Check Out My Site For Pix
http://home.comcast.net/~eclipseracer/Page/Home.htm

*Done with Project: Low Comp. Rebuild. Now I have a major oil leak by my rear main seal =(*

bump

Summit sells the calipers fro 117.00 why is the kit so expensive? vr-4 rotors are 13" right?
I am curious what is so special about these

Terry


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

the brand, and the fact that the company has been around a long time and is very reputable. by the way the kit is $1300 new and this kit is hardly used.

well i guess you should look more into summit....I dont doubt this is a great kit i just wanted to know what was good about it. If i had the need for better fronts i would buy it but my car is just a daily driver.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Oh and my mistake sonny the calipers summit sells a dyna lite 2 piston calipers for 117.00...look em up if you still want to deny reality....there you go this is why this kit is so high....4 pistons.


96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Why you stompin on this kid's sale Star Turbo Talon?
your first post was rude enough...just end it.

sorry ecl98pse.
Bump for inconsiderate noobage (and a great deal )...

ouch

"And my jam knock in the Mitsubishi
Girls pee pee when they see me,
Nava-hoes creep me in they tee pee..."
>Biggie Smalls -- R.I.P.

new project under way.................(see avatar for details)

I don't care what people have found cheaper or what they think about my price, if you don't like it don't buy it. this is a very good deal and they are still for sale. I will go as low as $550 shipped, if no-one on this board wants them then i'll put them on ebay.

BTW thanks sonny bk

I am not slamming anyone sale....I just wanted to know what was better about them. I like the wildwood design...very nice and the fact theyhave been around for years gives one security that replacement parts are available. Out of curiousity what brake pads do you order or can you buy them locally? This is my biggest worry about buying a big brake kit, how do you get replacement parts/pads?


Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

sorry and a few more questions...what kind of improvement did you see with these? What size rim is reqd to use these? Most importantly do you have pictures....I like the idea of 4 piston calipers.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

i read in another thread that CK said that brake upgrades dont do you any good at all... so i cant justify the money.... LMAO!

not sure where you buy replacement pads. they require a 17" wheel. they are definately better than stock and do not worp like the stock rotors do.

Damn... If I didn't just get GSX Calipers and Rotors, I'd be all over this.

SOMEONE BUY THESE

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

y u selling?

B/c i want to run drag slicks with a 15" wheel