2GNT.com Forums - Viewing topic - FS: Solid Front Motor Mounts

Interested In Advertising with 2GNT?

Home | Site Background| Info&Specs| Mods & Tech Info | CAPS | Part Reviews | Donate | 2GNT Stickers |

Printer-friendly copy

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #34151

View in linear mode

Subject: "FS: Solid Front Motor Mounts"

Previous topic | Next topic

XtremeRS	Feb-01-04 09:09 AM
Member since May 20th 2003 6329 posts,

#34151, "FS: Solid Front Motor Mounts"

Custom made solid front motor mounts are a direct fit, direct bolt on mount to fully replace the stock front mount. Made out of 1/8" thick steel, MIG welded 1/8" thick tube for cross bolt, and welded on nuts for the bottom 2 bolts. Comes with 2 new bolts for the crossmember connection, and painted high temp gloss black.

NOTE: Installing this mount will increase vibration, but its really not that bad, not like it shakes the car to pieces or anything. I can't even tell anymore on my car. Will greatly help to reduce or even eliminate wheel hop on hard launches. Gives a much more solid feel of the motor and transmission.

Price shipped to your door: 45.00

I accept paypal and MO's. I have 1 mount all ready to go, and one more that will be getting painted. I can make many more of these also, so I'm taking advanced orders if you would like one. Here is what it looks like:

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: FS: Solid Front Motor Mounts, TXrepresent, Feb-01-04 01:15 PM, #1

RE: FS: Solid Front Motor Mounts, Team

Team

dougie2, Feb-01-04 05:23 PM, #2

RE: FS: Solid Front Motor Mounts, TalonSpeed, Feb-01-04 05:35 PM, #3

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-01-04 05:38 PM, #5

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-01-04 05:35 PM, #4

RE: FS: Solid Front Motor Mounts, onetrav, Feb-02-04 04:19 AM, #6

RE: FS: Solid Front Motor Mounts, Moderator

Moderator

xcasbonx, Feb-02-04 04:42 AM, #7

RE: FS: Solid Front Motor Mounts, Justin99RS, Feb-02-04 04:44 AM, #8

RE: FS: Solid Front Motor Mounts, BuckNutty, Feb-02-04 04:51 AM, #9

RE: FS: Solid Front Motor Mounts, Team

Team

etx, Feb-02-04 07:33 AM, #10

RE: FS: Solid Front Motor Mounts, jesse, Feb-02-04 08:22 AM, #11

RE: FS: Solid Front Motor Mounts, Clay, Feb-02-04 11:00 AM, #12

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-02-04 11:19 AM, #13

RE: FS: Solid Front Motor Mounts, Team

Team

dougie2, Feb-02-04 12:58 PM, #14

RE: FS: Solid Front Motor Mounts, WickedESi, Feb-02-04 01:34 PM, #15

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-02-04 01:53 PM, #16

RE: FS: Solid Front Motor Mounts, Team

Team

Avenger, Feb-02-04 07:01 PM, #17

RE: FS: Solid Front Motor Mounts, silvreclipsers, Feb-02-04 07:26 PM, #18

RE: FS: Solid Front Motor Mounts, Moderator

Moderator

xcasbonx, Feb-03-04 05:11 AM, #19

RE: FS: Solid Front Motor Mounts, GorkoRacing, Feb-03-04 06:03 AM, #20

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-03-04 09:57 AM, #21

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-03-04 06:16 PM, #22

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-04-04 12:29 PM, #23

RE: FS: Solid Front Motor Mounts, Clay, Feb-04-04 01:45 PM, #24

RE: FS: Solid Front Motor Mounts, Chamuko, Feb-04-04 01:51 PM, #25

RE: FS: Solid Front Motor Mounts, Team

Team

dougie2, Feb-05-04 01:40 AM, #26

RE: FS: Solid Front Motor Mounts, Desibabu345, Feb-06-04 07:25 PM, #27

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-07-04 08:56 AM, #28

RE: FS: Solid Front Motor Mounts, WickedESi, Feb-07-04 12:14 PM, #29

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-11-04 08:12 AM, #30

RE: FS: Solid Front Motor Mounts, Eagle 5, Feb-12-04 07:09 AM, #31

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-12-04 07:22 AM, #32

RE: FS: Solid Front Motor Mounts, Desibabu345, Feb-12-04 10:21 AM, #33

RE: FS: Solid Front Motor Mounts, Team

Team

XtremeRS, Feb-12-04 02:49 PM, #34

RE: FS: Solid Front Motor Mounts, hawaiidiverx, Feb-13-04 03:51 PM, #35

RE: FS: Solid Front Motor Mounts, madhatter210, May-10-05 04:46 PM, #36

TXrepresent	Feb-01-04 01:15 PM
Member since Jun 24th 2003 541 posts,

#34170, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 0

I call dibs on one. I can send a money order ASAP! Send me an email with your info so I can send it to you. Thanks, I've been waiting for you to make these.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

dougie2	Feb-01-04 05:23 PM
Old School 2GNTer 2982 posts,

#34182, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 1
Feb-01-04 05:27 PM by dougie2

I'm not interested in buying one, I made my own... but I wanted to complement you Matt, on a good design. I like your idea of using a 2x4 to reduce the number of welds, increase strength, and reduce cost of production. Looks great! Good job!

You and I should get together sometime and start a TV Show called "2GNT Chopper" lol

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TalonSpeed	Feb-01-04 05:35 PM
Member since Oct 15th 2002 446 posts,

#34183, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 2

I just installed my solid mount today. GREAT PRODUCT!!! Vibration is there, but no wheel hop at all. This with my limited slip make fun take offs. Everything fit fine and looked good.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-01-04 05:38 PM
Member since May 20th 2003 6329 posts,

#34185, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 3

Originally posted by TalonSpeed
I just installed my solid mount today. GREAT PRODUCT!!! Vibration is there, but no wheel hop at all. This with my limited slip make fun take offs. Everything fit fine and looked good.

Excellent! Thanks for the feedback!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-01-04 05:35 PM
Member since May 20th 2003 6329 posts,

#34184, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 2
Feb-01-04 05:36 PM by XtremeRS

Originally posted by dougie2
I'm not interested in buying one, I made my own... but I wanted to complement you Matt, on a good design. I like your idea of using a 2x4 to reduce the number of welds, increase strength, and reduce cost of production. Looks great! Good job!

You and I should get together sometime and start a TV Show called "2GNT Chopper" lol

TX- sent you mail!

Hahah yeah that would be sweet! I contemplated for a bit on a design, and just thought this would be the easiest way to do it. Very strong, and minimal welds. But making them still takes a while, as the holes all have to perfectly line up, and be straight, or else it wont fit on the car right. This new floor standing drill press is coming in handy

So who gets to be Paul JR.??? hahah

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

onetrav	Feb-02-04 04:19 AM
Member since Oct 02nd 2003 225 posts,

#34199, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 4

I can vouch for this guy. As most of you allready know, great guy, freaking awsome car. He set the standard for me!

Matt, are you still making test pipes?? Do the fit the 420a venge?? Will I get a CEL???? Is there a way around the CEL??

shoot me an email if ya can.
onetrav@hotmail.com

-Travis

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

xcasbonx	Feb-02-04 04:42 AM
Donating 2GNT member 2874 posts,

#34202, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 6

This looks like something I could use in the future while im rebuilding and have everything torn apart. Let me know if you plan on building more, I would definetly buy one.

*winter rebuild in process*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Justin99RS	Feb-02-04 04:44 AM
Donating 2GNT member 1594 posts,

#34203, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 7

yea...i'd like to have one as well while the car is down and out...

'99 RS
gone, never forgotten

'03 BMW 330i 5speed

'00 Jeep Grand Cherokee Limited 4.7

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

BuckNutty	Feb-02-04 04:51 AM
Donating 2GNT member 7235 posts,

#34204, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 8

i want one...money now or after its all built?? I will be paying with pay pal.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

etx	Feb-02-04 07:33 AM
Donating 2GNT member 9740 posts,

#34219, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 9

I still need a upper downpipe section if you have one around Let me know.

____________________________________________________
four nails four corners four riders and four horses

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

jesse	Feb-02-04 08:22 AM
Old School 2GNTer 963 posts,

#34231, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 10
Feb-02-04 09:03 AM by jesse

nice design matt. who helped you come up with that idea?

travis, you should drive up there so he can check it on your car. like i think i told you, looks the same but they have different part numbers

*edit* oh yeah, i'll be paul jr. if you don't yell at me too much matt

-------------------------------

1997 Dodge Avenger - 13.7 @ 105

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Clay	Feb-02-04 11:00 AM
Old School 2GNTer 1790 posts,

#34249, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 11
Feb-02-04 11:00 AM by Clay

I'm interested! When you accept orders let me know.

EDIT: Mikhal_8@yahoo.com

95 GST | So-Cal

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-02-04 11:19 AM
Member since May 20th 2003 6329 posts,

#34253, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 12
Feb-02-04 11:20 AM by XtremeRS

I have enough blanks now to make around 6 or 7 motor mounts. I can take paypal or money orders, prepaid. Turnaround time on them is around 3-5 days, as the paint needs a few days to cure. I am always making the test pipes, just send me mail to let me know you want one. From what I can tell, the auto and manual trans both use the same exact front mount. Shouldn't be a problem.

Travis- The test pipe should fit right up, as the cats are identical on your car, to the eclipse/talon.

ETX- I need to pick up a few more U bends for the upper section of the downpipe you want. Just get hold of me for when you want to get together and do it up!

Thanks for all the interest guys!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

dougie2	Feb-02-04 12:58 PM
Old School 2GNTer 2982 posts,

#34259, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 13

Originally posted by XtremeRSFrom what I can tell, the auto and manual trans both use the same exact front mount.

Matt- they're exaxtly the same. The rear is different though.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

WickedESi	Feb-02-04 01:34 PM
Donating 2GNT member 3090 posts,

#34260, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 14

Matt I want to get one of your front MM's too. Same paypal addy?

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-02-04 01:53 PM
Member since May 20th 2003 6329 posts,

#34262, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 15

Originally posted by WickedESi
Matt I want to get one of your front MM's too. Same paypal addy?

Yep, anyone can paypal me to make their order anytime:

eclipsed4evr@comcast.net

Expect mounts to ship 3-5 days after payment!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Avenger	Feb-02-04 07:01 PM
Old School 2GNTer 2453 posts,

#34314, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 16

You got money Matt.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

silvreclipsers	Feb-02-04 07:26 PM
Donating 2GNT member 1756 posts,

#34315, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 17

I would buy one if I had a traction issue LOL

my shit= teh slow

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

xcasbonx	Feb-03-04 05:11 AM
Donating 2GNT member 2874 posts,

#34328, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 18

Word, you have payment also.

*winter rebuild in process*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

GorkoRacing	Feb-03-04 06:03 AM
Old School 2GNTer 1757 posts,

#34329, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 19

how bout a solid side motor mount next?!? I'll prolly get a mm from you as soon as i get some more $$

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-03-04 09:57 AM
Member since May 20th 2003 6329 posts,

#34349, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 20

Originally posted by GorkoRacing
how bout a solid side motor mount next?!? I'll prolly get a mm from you as soon as i get some more $$

There really isn't much need for a solid side mount, as most movement of the engine/trans is front to back, not side to side. It would be more benificial to put on a solid front, along with a solid rear mount. I may work up a design for the rear mounts, but this will be much more difficult, and also would have to make 2 different ones, because the auto trans mounts are differernt that the manual trans ones..

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-03-04 06:16 PM
Member since May 20th 2003 6329 posts,

#34408, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 21

bump

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-04-04 12:29 PM
Member since May 20th 2003 6329 posts,

#34472, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 22

one more time..Joel, your MM shipped out today!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Clay	Feb-04-04 01:45 PM
Old School 2GNTer 1790 posts,

#34479, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 23

You have money dude

95 GST | So-Cal

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Chamuko	Feb-04-04 01:51 PM
Donating 2GNT member 3668 posts,

#34482, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 24

sorry to highjack.

any of you guys willing to get rid of your front now? or maybe even the rear? for you 5spd guys of course...

Member # 751

FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

dougie2	Feb-05-04 01:40 AM
Old School 2GNTer 2982 posts,

#34533, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 21
Feb-05-04 01:41 AM by dougie2

Originally posted by XtremeRSI may work up a design for the rear mounts, but this will be much more difficult, and also would have to make 2 different ones, because the auto trans mounts are differernt that the manual trans ones..

Matt- While the stock ATX rear mount is molded differently than the MTX rear mount, the bolt hole is in the same exact location. The only difference between them is the way each functions. Basically, the ATX rubber is thicker and supports the addition weight of the trans and the MTX rubber is thinner controls movement better. In summary, a solid rear motor mount will work in either application. Only one design is necessary.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Desibabu345	Feb-06-04 07:25 PM
Member since Aug 02nd 2003 166 posts,

#34686, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 26

How hard of an install is this? Anything special required? Or just kinda support the engine with some wood/jack unbolt the existing mount, install this one (bolt on), and done? If so I'll take one and paypal you the money asap. Thanks,
Sid

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-07-04 08:56 AM
Member since May 20th 2003 6329 posts,

#34703, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 27
Feb-07-04 08:57 AM by XtremeRS

Originally posted by Desibabu345
How hard of an install is this? Anything special required? Or just kinda support the engine with some wood/jack unbolt the existing mount, install this one (bolt on), and done? If so I'll take one and paypal you the money asap. Thanks, Sid

Install is very simple. No need to support the motor. Just jack up the front end, remove the 2 bolts that hold the mount to the crossmember, then remove the center through bolt that holds the mount to the motor bracket, and then replace with the new solid mount. Very straight forward. I include install instructions with every mount also, just for kicks

Also, for everyone who has paid up to now (Saturday 2/7), you mounts will all be going out on this Monday!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

WickedESi	Feb-07-04 12:14 PM
Donating 2GNT member 3090 posts,

#34707, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 28

I already got my mount, and let me just say the welds are fantastic! Really high quality stuff. Very astically pleaseing too.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-11-04 08:12 AM
Member since May 20th 2003 6329 posts,

#34993, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 29

I have 2 more mounts all ready to go! Just paypal me at: eclipsed4evr@comcast.net to place your order. I can ship out the next following day! 45.00 shipped to your door.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Eagle 5	Feb-12-04 07:09 AM
Member since Jan 09th 2002 479 posts,

#35069, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 30

sent you money

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-12-04 07:22 AM
Member since May 20th 2003 6329 posts,

#35072, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 31

Originally posted by Eagle 5
sent you money

Got it man! It will ship on out tomorrow morning! You should get a tracking # sent to you when I create the shipping label tonight. Thanks!

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Desibabu345	Feb-12-04 10:21 AM
Member since Aug 02nd 2003 166 posts,

#35095, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 0

Hey I sent you money!  Thanks!
Sid

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

XtremeRS	Feb-12-04 02:49 PM
Member since May 20th 2003 6329 posts,

#35117, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 33

Thanks guys! Both your mounts will be going out tomorrow
morning..I am making many more of these things too

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

hawaiidiverx	Feb-13-04 03:51 PM
Member since Aug 13th 2003 198 posts,

#35226, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 34

email me when you have some made...i'll take one
mikey6480@hawaii.rr.com 
tks
Mike

-Mike

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

madhatter210	May-10-05 04:46 PM
Donating 2GNT member 2720 posts,

#73543, "RE: FS: Solid Front Motor Mounts"
In response to Reply # 35

Bump ....its spring time and its nice outside, no excuse to
not order a great bolt on and install it in 10 minutes for one
of the best non power mods for a 2g

http://www.murderpimp.com

2gnt T-shirts&swag
http://www.cafepress.com/mads

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #34151

Previous topic | Next topic

Powered by DCForum+ Version 1.2
Copyright 1997-2003 DCScripts.com

Tweets by @2gnt

^{I generated this page in 0.13969206809998 seconds, executing 12 queries.}