Custom made solid front motor mounts are a direct fit, direct bolt on mount to fully replace the stock front mount. Made out of 1/8" thick steel, MIG welded 1/8" thick tube for cross bolt, and welded on nuts for the bottom 2 bolts. Comes with 2 new bolts for the crossmember connection, and painted high temp gloss black.

NOTE: Installing this mount will increase vibration, but its really not that bad, not like it shakes the car to pieces or anything. I can't even tell anymore on my car. Will greatly help to reduce or even eliminate wheel hop on hard launches. Gives a much more solid feel of the motor and transmission.

Price shipped to your door: 45.00

I accept paypal and MO's. I have 1 mount all ready to go, and one more that will be getting painted. I can make many more of these also, so I'm taking advanced orders if you would like one. Here is what it looks like:

I call dibs on one. I can send a money order ASAP! Send me an email with your info so I can send it to you. Thanks, I've been waiting for you to make these.

I'm not interested in buying one, I made my own... but I wanted to complement you Matt, on a good design. I like your idea of using a 2x4 to reduce the number of welds, increase strength, and reduce cost of production. Looks great! Good job! :thumbsup

You and I should get together sometime and start a TV Show called "2GNT Chopper" lol :cheers

I just installed my solid mount today. GREAT PRODUCT!!! Vibration is there, but no wheel hop at all. This with my limited slip make fun take offs. Everything fit fine and looked good.

Originally posted by TalonSpeed
I just installed my solid mount today. GREAT PRODUCT!!! Vibration is there, but no wheel hop at all. This with my limited slip make fun take offs. Everything fit fine and looked good.

Excellent! Thanks for the feedback!

Originally posted by dougie2
I'm not interested in buying one, I made my own... but I wanted to complement you Matt, on a good design. I like your idea of using a 2x4 to reduce the number of welds, increase strength, and reduce cost of production. Looks great! Good job! :thumbsup You and I should get together sometime and start a TV Show called "2GNT Chopper" lol :cheers

TX- sent you mail!

Hahah yeah that would be sweet! I contemplated for a bit on a design, and just thought this would be the easiest way to do it. Very strong, and minimal welds. But making them still takes a while, as the holes all have to perfectly line up, and be straight, or else it wont fit on the car right. This new floor standing drill press is coming in handy :) So who gets to be Paul JR.??? hahah

I can vouch for this guy. As most of you allready know, great guy, freaking awsome car. He set the standard for me!

Matt, are you still making test pipes?? Do the fit the 420a venge?? Will I get a CEL???? Is there a way around the CEL??

shoot me an email if ya can.
onetrav@hotmail.com

This looks like something I could use in the future while im rebuilding and have everything torn apart. Let me know if you plan on building more, I would definetly buy one. :thumbsup


*winter rebuild in process*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

yea...i'd like to have one as well while the car is down and out...

i want one...money now or after its all built?? I will be paying with pay pal.

I still need a upper downpipe section if you have one around ;) Let me know.

nice design matt. who helped you come up with that idea? :thumbsup

travis, you should drive up there so he can check it on your car. like i think i told you, looks the same but they have different part numbers :shrug


*edit* oh yeah, i'll be paul jr. if you don't yell at me too much matt :D

I'm interested! When you accept orders let me know.

EDIT: Mikhal_8@yahoo.com

I have enough blanks now to make around 6 or 7 motor mounts. I can take paypal or money orders, prepaid. Turnaround time on them is around 3-5 days, as the paint needs a few days to cure. I am always making the test pipes, just send me mail to let me know you want one. From what I can tell, the auto and manual trans both use the same exact front mount. Shouldn't be a problem.

Travis- The test pipe should fit right up, as the cats are identical on your car, to the eclipse/talon.

ETX- I need to pick up a few more U bends for the upper section of the downpipe you want. Just get hold of me for when you want to get together and do it up!

Thanks for all the interest guys!

Originally posted by XtremeRSFrom what I can tell, the auto and manual trans both use the same exact front mount.

Matt- they're exaxtly the same. The rear is different though.

Matt I want to get one of your front MM's too. Same paypal addy?

Originally posted by WickedESi
Matt I want to get one of your front MM's too. Same paypal addy?

Yep, anyone can paypal me to make their order anytime:

eclipsed4evr@comcast.net

Expect mounts to ship 3-5 days after payment!

You got money Matt. :)

I would buy one if I had a traction issue LOL

my shit= teh slow

Word, you have payment also.


*winter rebuild in process*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

how bout a solid side motor mount next?!? I'll prolly get a mm from you as soon as i get some more $$

Originally posted by GorkoRacing
how bout a solid side motor mount next?!? I'll prolly get a mm from you as soon as i get some more $$

There really isn't much need for a solid side mount, as most movement of the engine/trans is front to back, not side to side. It would be more benificial to put on a solid front, along with a solid rear mount. I may work up a design for the rear mounts, but this will be much more difficult, and also would have to make 2 different ones, because the auto trans mounts are differernt that the manual trans ones..

bump

one more time..Joel, your MM shipped out today!

You have money dude :)

sorry to highjack.

any of you guys willing to get rid of your front now? or maybe even the rear? for you 5spd guys of course...

Originally posted by XtremeRSI may work up a design for the rear mounts, but this will be much more difficult, and also would have to make 2 different ones, because the auto trans mounts are differernt that the manual trans ones..

Matt- While the stock ATX rear mount is molded differently than the MTX rear mount, the bolt hole is in the same exact location. The only difference between them is the way each functions. Basically, the ATX rubber is thicker and supports the addition weight of the trans and the MTX rubber is thinner controls movement better. In summary, a solid rear motor mount will work in either application. Only one design is necessary.

How hard of an install is this? Anything special required? Or just kinda support the engine with some wood/jack unbolt the existing mount, install this one (bolt on), and done? If so I'll take one and paypal you the money asap. Thanks,
Sid

Originally posted by Desibabu345
How hard of an install is this? Anything special required? Or just kinda support the engine with some wood/jack unbolt the existing mount, install this one (bolt on), and done? If so I'll take one and paypal you the money asap. Thanks, Sid

Install is very simple. No need to support the motor. Just jack up the front end, remove the 2 bolts that hold the mount to the crossmember, then remove the center through bolt that holds the mount to the motor bracket, and then replace with the new solid mount. Very straight forward. I include install instructions with every mount also, just for kicks :)

Also, for everyone who has paid up to now (Saturday 2/7), you mounts will all be going out on this Monday!

I already got my mount, and let me just say the welds are fantastic! Really high quality stuff. Very astically pleaseing too.

I have 2 more mounts all ready to go! Just paypal me at: eclipsed4evr@comcast.net to place your order. I can ship out the next following day! 45.00 shipped to your door.

sent you money

Originally posted by Eagle 5
sent you money

Got it man! It will ship on out tomorrow morning! You should get a tracking # sent to you when I create the shipping label tonight. Thanks!

Hey I sent you money!  Thanks!
Sid

Thanks guys! Both your mounts will be going out tomorrow
morning..I am making many more of these things too :)

email me when you have some made...i'll take one
mikey6480@hawaii.rr.com 
tks
Mike

Bump ....its spring time and its nice outside, no excuse to
not order a great bolt on and install it in 10 minutes for one
of the best non power mods for a 2g