Fuel pump assy, complete Fuel Sending Unit Left & Right door shell, black, excellant shape Front compression arms, still have mitsu sticker on them Front upper control arms, ball joint is still very tight in socket front spindles and both axles Rear upper control arms Front disc brakes with powerstop cross drilled rotors Complete A/C lines and equipment except condenser All power steering lines.
#33820, "RE: F/S...GS parts" In response to Reply # 2
Whats the condition on the front and rear control arms? and any pics? I've needed new control arms since I got my lower ball joint recall almost 2 summers ago...yikes!
#33826, "RE: F/S...GS parts" In response to Reply # 3
The control arms are in really good condition, the ball joints are nice and tight in their sockets, not loose and wobbily. the arms do have surface rust on them for the weather obviously. The ball joints in the arms might need dust boots which are available at autozone for 2.00. I am not sure if they were damaged from the fork separator. If yours are bad these are a perfect replacement...make an offer.
i do have picts but need to get themdeveloped..i will try to get that taken car of by friday for ya.
#33825, "RE: F/S...GS parts" In response to Reply # 1
The door shells have one tiny ding per door, shopping kart most likely, very small inconspicuous, i do have pictures and will get them to you when i get home tonight. They were power i have pulled all the guts out of them, hence they are door shells...not loaded doors. Hope this helps any confusion.
Search
Printer-friendly copy
3 Users in Chat
