All parts from a 95 GS

Fuel pump assy, complete
Fuel Sending Unit
Left & Right door shell, black, excellant shape
Front compression arms, still have mitsu sticker on them
Front upper control arms, ball joint is still very tight in socket
front spindles and both axles
Rear upper control arms
Front disc brakes with powerstop cross drilled rotors
Complete A/C lines and equipment except condenser
All power steering lines.

Terry

any pictures of the door shells? If so e-mail them to paulmummolo@comcast.net


best time so far 14.3 @ 101.1mph

2nd dibs on door shells, if they are power

ajna_star @ yahoo.com

Whats the condition on the front and rear control arms? and any pics? I've needed new control arms since I got my lower ball joint recall almost 2 summers ago...yikes!



*winter rebuild in process*
GST Muffler
injen short ram intake
magnecore 8.5mm wires
EGR removal/blockoff
front/rear strut tower bars
GSX dual piston calipers

The control arms are in really good condition, the ball joints are nice and tight in their sockets, not loose and wobbily. the arms do have surface rust on them for the weather obviously. The ball joints in the arms might need dust boots which are available at autozone for 2.00. I am not sure if they were damaged from the fork separator. If yours are bad these are a perfect replacement...make an offer.

i do have picts but need to get themdeveloped..i will try to get that taken car of by friday for ya.

Thanks

Terry

The door shells have one tiny ding per door, shopping kart most likely, very small inconspicuous, i do have pictures and will get them to you when i get home tonight. They were power i have pulled all the guts out of them, hence they are door shells...not loaded doors. Hope this helps any confusion.

Thanks

Terry

ac lines!
how much, and how fast can you ship them to 92310?
-drew

ill do 25 shipped for both upper control arms

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA