2GNT.com Forums - Viewing topic - engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,.....

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #24772

View in linear mode

Subject: "engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."

Previous topic | Next topic

lickscissors	Oct-05-03 05:09 PM
Member since May 07th 2003 1206 posts,

#24772, "engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
Oct-05-03 05:10 PM by lickscissors

well im relisting most of this stuff....ive got a 420a engine, bad crank....all sensors are left excluding the map, coolant sensor, and a tps sensor.... i still have:
good head, cams, cam gears, valve cover,
exhaust manifold, good, no cracks
heat shield, good condition
all other sensors for the engine, and tranny
good drivers side door, dented passenger, good handles
good grey cloth seats (make an offer, just get them out of here)
fuel rail, injectors, harness
throttle body, bare tb, iac sensor,
i can make a 60mm jeep tb for $160 shipped
bare block, water pump, pistons, pulley tensioners
(3) rear bearings, complete with lugs
rear drum brakes, complete
sony tape player/10 cd disk changer
clarion 6 cd changer...never used, 2 magazines
ALSO UP FOR TRADE FOR TURBO PARTS.... I NEED STOCK 1G IC, IC PIPES, SFMU, BOV....THANKS

ask, i might have it if it has anything to do with the engine.....
thanks, and just make an offer, just looking to get rid of this stuff

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-05-03 05:24 PM, #1

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., MiztahfooLish, Oct-05-03 05:26 PM, #2

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Phat95EclipseRS, Oct-05-03 09:28 PM, #3

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-06-03 03:10 AM, #4

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., TribalTalon95, Oct-06-03 04:10 AM, #5

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., rgirard413, Oct-06-03 06:21 AM, #6

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-06-03 12:34 PM, #7

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., DSMTunerS95, Oct-06-03 01:23 PM, #8

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-06-03 02:09 PM, #9

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Blizare, Oct-07-03 07:26 AM, #10

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Global Ruler Of All Things

Global Ruler Of All Things

DarkOne, Oct-07-03 07:46 AM, #11

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-07-03 09:00 AM, #12

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., sd240, Oct-07-03 10:12 AM, #13

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Chamuko, Oct-07-03 05:05 PM, #14

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Ozzmosis86, Oct-07-03 08:35 PM, #15

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-08-03 03:33 AM, #16

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., Kirby, Oct-08-03 05:20 AM, #17

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., safedawg, Oct-08-03 06:12 AM, #18

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., sd240, Oct-08-03 01:31 PM, #19

RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....., lickscissors, Oct-09-03 03:15 AM, #20

how about timing belt tensioner, lickscissors, Oct-10-03 03:11 AM, #21

Still have everything!, lickscissors, Oct-12-03 02:55 PM, #22

lickscissors	Oct-05-03 05:24 PM
Member since May 07th 2003 1206 posts,

#24777, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 0

also i just got rear ended the other day, so ill also trade something for the center tailight piece....dont care what color or anything, cause im going to be painting it.....thanks
P.S.-- buy the seats

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

MiztahfooLish	Oct-05-03 05:26 PM
Old School 2GNTer 860 posts,

#24778, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 1

Quote
also i just got rear ended the other day, so ill also trade something for the center tailight piece....dont care what color or anything, cause im going to be painting it.....thanksP.S.-- buy the seats

I have the stock center tail piece, wanna trade with your handles?
Let me know. Thanks.

MiztahfooLish...
'95 RS (16.72 @ 84 mph)
'03 ALTIMA 3.5 SE V6 5spd (14.3 @ 95 mph w/ 2.1 60 foot)

CAI w/ K&N, Greddy EVO catback exhaust, 2.5" testpipe, OBX header & downpipe, shortshifter, E.S. motormounts, Accel 8.5mm wires, Blitz rear, '99 conversion, diamondplatemats, Powerslot rotors, M3 LED mirrors, JEEP 60mm TB, ported intake manifold & MORE

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Phat95EclipseRS	Oct-05-03 09:28 PM
Member since Aug 14th 2003 57 posts,

#24816, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 2

How much are you looking for the bare block?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-06-03 03:10 AM
Member since May 07th 2003 1206 posts,

#24824, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 3

just make an offer...i had one for $50 a week or so ago, but he dropped out

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

TribalTalon95	Oct-06-03 04:10 AM
Member since Apr 11th 2003 51 posts,

#24827, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 4

how about 30 shipped for the driver side door handle?? let me know.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

rgirard413	Oct-06-03 06:21 AM
Member since Jun 27th 2002 425 posts,

#24840, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 5

how much for the speed sensor and the plug connecting into it?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-06-03 12:34 PM
Member since May 07th 2003 1206 posts,

#24886, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 6

speed sensor- $25 shipped...but i dont have the plug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DSMTunerS95	Oct-06-03 01:23 PM
Member since Jul 30th 2003 185 posts,

#24891, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 7

do you have the gear that connects to the pinion in the tranny ? for the speedometer, i replaced the speedo sensor and the gear, and the gear inside the tranny keeps chewing up the plastic one, so i need the one inside the tranny thx

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-06-03 02:09 PM
Member since May 07th 2003 1206 posts,

#24897, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 8

damn, i remember looking at that....can you send a picture of exactly what you need and ill get it all gathered up....yes i do have it, somewhere

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Blizare	Oct-07-03 07:26 AM
Donating 2GNT member 7595 posts,

#24960, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 9

any mufflers??? i super need one bad..? emoji

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

DarkOne	Oct-07-03 07:46 AM
Donating 2GNT member 14955 posts,

#24965, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 10

Do you have the interior door skins? I need a driver's side (or both) something terrible. If you have them, do you have a pic so i can make sure they are the right style?

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)

Factory Service Manuals: http://nawdu.de/files/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-07-03 09:00 AM
Member since May 07th 2003 1206 posts,

#24974, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 11

no, no mufflers or interior pieces other that door handles, sorry about that....but hey, dont you need some new cloth seats?

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

sd240	Oct-07-03 10:12 AM
Member since May 25th 2003 298 posts,

#24988, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 12

Do you have a picture of the seats, and how much do you want?

Shawn

93 Tsi AWD-SAFC I, Apexi N1 turbo back, MBC, K&N w/ hacked can,
Walbro 255, Accel wires, 650cc injectors, stage 3 dsmchip

97 Neon ACR-Stock

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Chamuko	Oct-07-03 05:05 PM
Donating 2GNT member 3668 posts,

#25039, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 13

Is the clarion cd changer for the clarion Head units or RF modulated? How much for that?

Also are the door handles the exterior ones? eveything working? I.e. clips etc. If so Ill take both.

Member # 751

FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ozzmosis86	Oct-07-03 08:35 PM
Donating 2GNT member 549 posts,

#25072, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 0

Please email with how much you are looking to get for the seats, especially the passenger side seat. What I really need is the sliding mechanism on the base of the passenger seat, but I am interested in buying both complete seats. Please let me know approximately what you would want for them including shipping to 46835.

Thanks in advance,

Andy

MonteSS86@hotmail.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-08-03 03:33 AM
Member since May 07th 2003 1206 posts,

#25083, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 15

$50 for all three seats, not sure on shipping though
the clarion cd changer is brand new...ive never even used it..... its made for clarion head units, but you can by the fm modulator to plug into any radio....im looking like $40 for it....i do have the door handles, they're in good condition, no chips or anything, there's a little overspray on them, but it would buff out and im sure you'd be painting them....let me know, i was looking at $30 shipped each for them....thanks
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Kirby	Oct-08-03 05:20 AM
Donating 2GNT member 2181 posts,

#25100, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 16

If that other guy does not buy the bask seat then I might. Let me know cause my friend burnt the hell out of mine.

I edited to the wiki!

Originally posted by DR1665
NOTE TO SELF: Go commando to wedding. Scar the Irishman for life.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

safedawg	Oct-08-03 06:12 AM
Member since May 01st 2002 345 posts,

#25110, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 17

Hey do you have a timing belt cover? I need one asap thanks.

Work in progress
98 GS t3/t04e, hrc Sidemount, tial 38mm, HKS ssq bov, clutchmaster stage 4, wiseco pistons, Eagle rods, Apexi TT, HKS EVC II, Phantom grip lsd, 3in turbo back, Eibach pro-kit, Defi D-gauge EGT,boost, autometer fuel pressure
8-inj setup in the works, HKS AIC III and 450cc injectors

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

sd240	Oct-08-03 01:31 PM
Member since May 25th 2003 298 posts,

#25166, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 18

I no longer need the seats, so give them to him^^^. Thanks.

Shawn

93 Tsi AWD-SAFC I, Apexi N1 turbo back, MBC, K&N w/ hacked can,
Walbro 255, Accel wires, 650cc injectors, stage 3 dsmchip

97 Neon ACR-Stock

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-09-03 03:15 AM
Member since May 07th 2003 1206 posts,

#25201, "RE: engine sensors, block, head, valve cover, seats, doors, handles, etc, etc,....."
In response to Reply # 19

yeah i got the timing belt covers...let me know

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-10-03 03:11 AM
Member since May 07th 2003 1206 posts,

#25286, "how about timing belt tensioner"
In response to Reply # 20

i also came across a timing belt tensioner, still in good shape, no leaks and is very sturdy.....

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

lickscissors	Oct-12-03 02:55 PM
Member since May 07th 2003 1206 posts,

#25447, "Still have everything!"
In response to Reply # 21

everything still for sale other than a few sensors..... let me know if you need anything.....
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Team 2GNT Marketplace

2GNT Buy / Sell / Trade (BST)

topic #24772

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.081 seconds, executing 58 queries.