well im relisting most of this stuff....ive got a 420a engine, bad crank....all sensors are left excluding the map, coolant sensor, and a tps sensor.... i still have:
good head, cams, cam gears, valve cover,
exhaust manifold, good, no cracks
heat shield, good condition
all other sensors for the engine, and tranny
good drivers side door, dented passenger, good handles
good grey cloth seats (make an offer, just get them out of here)
fuel rail, injectors, harness
throttle body, bare tb, iac sensor,
i can make a 60mm jeep tb for $160 shipped
bare block, water pump, pistons, pulley tensioners
(3) rear bearings, complete with lugs
rear drum brakes, complete
sony tape player/10 cd disk changer
clarion 6 cd changer...never used, 2 magazines
ALSO UP FOR TRADE FOR TURBO PARTS.... I NEED STOCK 1G IC, IC PIPES, SFMU, BOV....THANKS

ask, i might have it if it has anything to do with the engine.....
thanks, and just make an offer, just looking to get rid of this stuff

also i just got rear ended the other day, so ill also trade something for the center tailight piece....dont care what color or anything, cause im going to be painting it.....thanks
P.S.-- buy the seats

Quote
also i just got rear ended the other day, so ill also trade something for the center tailight piece....dont care what color or anything, cause im going to be painting it.....thanksP.S.-- buy the seats

I have the stock center tail piece, wanna trade with your handles?
Let me know. Thanks.

MiztahfooLish...
'95 RS (16.72 @ 84 mph)
'03 ALTIMA 3.5 SE V6 5spd (14.3 @ 95 mph w/ 2.1 60 foot)

CAI w/ K&N, Greddy EVO catback exhaust, 2.5" testpipe, OBX header & downpipe, shortshifter, E.S. motormounts, Accel 8.5mm wires, Blitz rear, '99 conversion, diamondplatemats, Powerslot rotors, M3 LED mirrors, JEEP 60mm TB, ported intake manifold & MORE

How much are you looking for the bare block?

just make an offer...i had one for $50 a week or so ago, but he dropped out

how about 30 shipped for the driver side door handle?? let me know.

how much for the speed sensor and the plug connecting into it?

speed sensor- $25 shipped...but i dont have the plug

do you have the gear that connects to the pinion in the tranny ? for the speedometer, i replaced the speedo sensor and the gear, and the gear inside the tranny keeps chewing up the plastic one, so i need the one inside the tranny thx

damn, i remember looking at that....can you send a picture of exactly what you need and ill get it all gathered up....yes i do have it, somewhere

any mufflers??? i super need one bad..??:bowdown

Do you have the interior door skins? I need a driver's side (or both) something terrible. If you have them, do you have a pic so i can make sure they are the right style?

no, no mufflers or interior pieces other that door handles, sorry about that....but hey, dont you need some new cloth seats? :thumbsup

Do you have a picture of the seats, and how much do you want?

Shawn

Is the clarion cd changer for the clarion Head units or RF modulated? How much for that?

Also are the door handles the exterior ones? eveything working? I.e. clips etc. If so Ill take both.

Please email with how much you are looking to get for the seats, especially the passenger side seat. What I really need is the sliding mechanism on the base of the passenger seat, but I am interested in buying both complete seats. Please let me know approximately what you would want for them including shipping to 46835.

Thanks in advance,

Andy

MonteSS86@hotmail.com

$50 for all three seats, not sure on shipping though
the clarion cd changer is brand new...ive never even used it..... its made for clarion head units, but you can by the fm modulator to plug into any radio....im looking like $40 for it....i do have the door handles, they're in good condition, no chips or anything, there's a little overspray on them, but it would buff out and im sure you'd be painting them....let me know, i was looking at $30 shipped each for them....thanks
doug

If that other guy does not buy the bask seat then I might. Let me know cause my friend burnt the hell out of mine.

Hey do you have a timing belt cover? I need one asap thanks.

I no longer need the seats, so give them to him^^^. Thanks.

Shawn

yeah i got the timing belt covers...let me know

i also came across a timing belt tensioner, still in good shape, no leaks and is very sturdy.....

everything still for sale other than a few sensors..... let me know if you need anything.....
doug