One day only - Thursday August 27th - if you paypal by midnight, you can have any part for 75% of my asking price. Take any price below, and multiply by .75, send it to my paypal (pro_perform and its at comcast.net) and i'll get it shipped out to you friday - after that, i leave for my wedding for a week, so i'm done selling parts for a while.

--------------------------------------------------

new bosch 044 fuel pump, plus i have all the correct AN adapters for it i'll toss in for free, not a knock off pump, i paid a fortune for the real deal. plus i found some insulated "U" shaped brackets that fit it i'll also toss in.
$200 shipped



used inline fuel pump that came with a hahn kit, probably a walbro or accel...comes with bracket and some hose...
$75 shipped



stock fuel pump bracket that fits into tank, great condition
$20 shipped



new walbro high pressure 255lph fuel pump and filter, etc.
$90 shipped

PIC COMING LATER

used autometer pro comp ultra lite electric oil temp gauge #4356
$150 shipped



used autometer sport comp AFR gauge
$55 shipped



used autometer pro comp ultralite electric fuel pressure gauge, 100psi #4363
$185 shipped



used greddy oil catch can, chrome
$80 shipped

PICS COMING LATER

used thermal RD 3" cat-back exhaust, i think it comes with a cat delete pipe too if i'm not mistaken
$450 pick up near pittsburgh pa

PICS COMING LATER

DOHC exhaust flange - mild steel, cnc'd
$50 shipped



used ported TB, 55mm i do believe
$100 shipped

PICS COMING LATER

new gutted 3" universal cat
$25 shipped



new PS pump pulley, plastic, 4 grooves like a neon, 04668448aa
$15 shipped



new 2.4L PT cruiser front timing cover, 04884409aa
$15 shipped



several sets used stock injectors
$30 shipped each

PICS COMING LATER

new aluminum upper rad hose replacement - actually fully aluminum, not braided rubber, summit sum-390124, 24" long with ends
$70 shipped





new sealed power bronze valve guides
$30 shipped

PICS COMING LATER

new turbo xs type h blow off valve - not "rfl" type
$130 shipped



used 4an hahn turbo oil feed setup
$50 shipped



used autometer pro comp ultralite electric EGT gauge and probe 1600F #4344
$120 shipped



new coolingmist water injector setup - pump, hoses, wires, etc
$180 shipped



like new autometer carbon fiber ultralite 30psi electric boost gauge, only gauge was hooked up, rest is unused including electronic boost sensor #4777
$165 shipped



new greddy full auto turbo timer
$80 shipped



new pt cruiser rockers - set in the same head that was never run
$130 shipped





like new 2.4L arp head studs - clamped down one head to a block, never ran - come with upgraded oversized arp washers (along with unused original size) plus oversized arp nuts with more clamping area
$100 shipped



used aeromotive FPR and fittings for it, some brand new
$130 shipped - TELL ME WHAT FITTINGS YOU NEED, I'LL TOSS SOME IN



new "fuel line setup" - i have 6ft 6an braided, 10ft 8an braided, and many, many, fittings that i had ready to make a who new fuel setup for my car, front the pump output to a FPR through 2 fuel rails, its all there
$140 SHIPPED for fuel parts - TELL ME WHAT YOU NEED - 8AN SETUP READY TO GO - also have turbo water cooling lines, oil lines, etc.



new 5269558 sensor - genuine mopar oil pressure sending unit
$70 shipped

PICS COMING LATER

new 33004281 sensor - genuine mopar coolant temp sensor for 95
$30 shipped

PICS COMING LATER

used weld racing wheels, a pair for front, 15" x 8", 4.5" backspace, i believe called "rodlites", they have dual 5 bolt patters, so they fit other cars too...
$400 shipped

PICS COMING LATER

used fluidyne radiator
$300 shipped

PICS COMING LATER

2 used low profile pusher fans for fluidyne
$120 shipped

PICS COMING LATER

new magnaflow mp 7010 inline fuel filter - 25 mictors, 8an inlet/outlet
$80 shipped

PICS COMING LATER

new 2.4L oil pump
$130 shipped

PICS COMING LATER

stainless tubular turbo manifold - i bought all the parts, cut them all on the horizontal bandsaw, got everything ready to get welded...and never got it welded...comes with everything seen in this post, you weld it yourself or get someone to do it...will fit an "s cover turbo" on a 2.4L swap...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=8&topic_id=100980&mode=full
$200 shipped

new 2.4L crank scraper plus new oil pan gasket
$70 shipped

PICS COMING LATER

new arp exhaust manifold studs - 4 in package, 4 only used to mock up manifold...
$60 shipped

PICS COMING LATER

new mopar 05269983 genuiune mopar map sensor
$80 shipped

PICS COMIGN LATER

new mopar 33004280 genuine mopar air intake temp sensor
$25 shipped

PICS COMING LATER

used 4671276 mopar map sensor
$30 shipped

3" v band turbo outlet, fits on GT35R and many other 3" 4 bolt out turbos, i have bolts for this somewhere around here too
$50 shipped



strut tower bar front
$25 shipped




MORE PARTS:

new 3 gauge pillar pod, grey
$20 shipped



used unorthodox racing underdrive pully for 2.4 - both belts 4 grooves
$150 shipped





brand new 2.4L timing parts - all genuine mopar parts - also have brand new mopar timing belt to go with them
$180 shipped







two titanium bolts i had made to hold the hydraulic pin tensioner in
$20 shipped



perfectly sized block to use a hyraulic pin tensioner on 2.4L block - if you need this, you'll understand where it goes - between block and hydraulic tensioner on a 2.4L
$20 shipped



new rear timing cover for 2.4L block
$25 shipped



another new front timing cover for 2.4L block, partially modified to allow us to use our passenger side mount
$25 shipped



...and there will be plenty more to come...its unreal...i haven't even gotten to transmissions, blocks/engines, and an entire car that needs parted out...

...also have some other stuff that i haven't found or listed yet...

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

It says 75% "of" my asking prices, which is 25% off. Take a $200 part, multiply by .75, send $150 to my paypal, get part, profit.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

im confused

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

The confusion is i said 75% "OF" my asking price, not 75% OFF my asking price. Most who have paypaled understood what i said. I'm not giving the parts away free today, instead you can get brand new parts for way under what they cost.

Examples:

Cooling mist setup: $200 plus shipping from them, 75% OF $180 means its $135 til midnight.

Bosch 044 fuel pump plus both fittings and clamps: $200 + $20 + $35 for all the parts is cheapest i can find, $255 plus shipping. From me today - brand new - i was asking $200 - now its $150 shipped if paid by midnight.

No, i'm not selling $255 parts for $50, sorry if people got confused.

-MIKE-

Stroked 2.2L

i'm still confused

___________________________________________



http://www.2gnt.com/quote_db.php?id=278

Outside of Corona: "That sucks, peace out..." (jamie walks away)... "Sweeet, what we doin?" -Zac
Tim's garage (prior to motor install): "Im gonna smoke real quick, that way if you fuck up I am already nicotined up" -Tim

Please lock. I'll be back in a week or so to unload the rest of my parts.