I have a set of the parts required to do the rear drum-to-disc conversion. The backing plates have my special mod added already so you do NOT need to replace your e-brake cables.

Parts include the backing plates with all e-brake hardware, non-scored rotors with dust plugs in place, calipers with all attachement bolts and old brake pads (included for reference to get new one's) plus two flex hoses.

Note these parts are from an AZ car that blew a motor last month. The brake fluid drained was fresh. Bolts turn easily. No rust. I cleaned up any scratches on the backing plates and they are painted and ready to use. The backing plates had been flattened when the car was set on the ground without tires. I straightened that out (plus you don't see it when the rotors are on anyway).

The calipers have been bead blasted and need very little clean up to shoot your choice of caliper paint.

Other than the few dings noted on the dust shield these parts are in great shape.

$250 plus shipping. I prefer Paypal and only ship by UPS.

Don't forget to use my tech pics when you do the conversion.
http://www.rcaz.com/rcaz/sub%20indexes/drum_to_disc/index.htm

Looking for any trades?

-MIKE-

Stroked 2.2L

Not really but I guess it depends on what you have.

Got any primo condition 2Gb side skirts/door caps full set?

Got a great condition 97-98 Talon OEM front bumper?

Like new 2G grey or black OEM carpet?

-MIKE-

Stroked 2.2L

How much shipped to Tamarac, Fl. 33319?

I have a thread in search of this.

Thanks

_Jonathan

*edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

i would take the backing plates if you ever decide to split it up

LED tails : Done for now!
99 eclipse rst
cobalt blue met. paint,star stage 2 upgraded t3/t460trim turbo ceramic coated , polished compressor housing, ,optima yellow top, chrome i/c piping ,front mount ntercooler ,apexi turbo timer . zeitronix wb02 ,faze oil ,boost gauge,egt ,bosch 4x plugs,kyb agx struts, pro kit springs.17''adr venomous rims,Falken azenis ,brembo dilled/slotted rotors ,turbo xs bov ,oil catch can,manual shiftknob,autometer pyrometer egt , vortech sfmu,b&m fuel pressure gauge ,accel 310cc injectors ,gasketmatched and polished intake manifold ,58mm throttle body ,no egr,polished turbonetics wastegate,fuel pump rewire,homade fcd and a lot more .LED reverse lights ,sidemarkers and tails .atx to mtx swap . South bend tz clutch . Tons more
http://imageshack.us>


http://www.2gnt.com/index.php?d=boosted60trimrst
My contribution to the wiki
http://www.2gnt.com/index.php?d=crank%20arm%20spindle%20mod%20to%20fit%20power%20panels