I have a set of the parts required to do the rear drum-to-disc conversion. The backing plates have my special mod added already so you do NOT need to replace your e-brake cables.

Parts include the backing plates with all e-brake hardware, non-scored rotors with dust plugs in place, calipers with all attachement bolts and old brake pads (included for reference to get new one's) plus two flex hoses.

Note these parts are from an AZ car that blew a motor last month. The brake fluid drained was fresh. Bolts turn easily. No rust. I cleaned up any scratches on the backing plates and they are painted and ready to use. The backing plates had been flattened when the car was set on the ground without tires. I straightened that out (plus you don't see it when the rotors are on anyway).

The calipers have been bead blasted and need very little clean up to shoot your choice of caliper paint.

Other than the few dings noted on the dust shield these parts are in great shape.

$250 plus shipping. I prefer Paypal and only ship by UPS.

Don't forget to use my tech pics when you do the conversion.
http://www.rcaz.com/rcaz/sub%20indexes/drum_to_disc/index.htm

Looking for any trades?

Not really but I guess it depends on what you have.

Got any primo condition 2Gb side skirts/door caps full set?

Got a great condition 97-98 Talon OEM front bumper?

Like new 2G grey or black OEM carpet?

Originally posted by azdave
Not really but I guess it depends on what you have. Got any primo condition 2Gb side skirts/door caps full set? Got a great condition 97-98 Talon OEM front bumper? Like new 2G grey or black OEM carpet?

I have a carpet set I bought off of ebay and never used, its black..I can get pics tomorrow night if you would like?

Originally posted by eclipse982nrRST

Originally posted by azdave Not really but I guess it depends on what you have. Got any primo condition 2Gb side skirts/door caps full set? Got a great condition 97-98 Talon OEM front bumper? Like new 2G grey or black OEM carpet?

I have a carpet set I bought off of ebay and never used, its black..I can get pics tomorrow night if you would like?

I am only interested in OEM carpet at this point. I know that is harder to find but I'm real picky. Is yours remanufactured or OEM?

How much shipped to Tamarac, Fl. 33319?

I have a thread in search of this.

Thanks

_Jonathan

*edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

Originally posted by PsychO
How much shipped to Tamarac, Fl. 33319? I have a thread in search of this. Thanks _Jonathan *edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

It's heavy stuff so I better get it boxed and weighed so I don't guess too low. I get a pretty good rate on UPS here at work so it might not be that bad. I'll post back tomorrow morning.

Sorry, I sold the sway bar and brackets already.

Originally posted by azdave

Originally posted by PsychO How much shipped to Tamarac, Fl. 33319? I have a thread in search of this. Thanks _Jonathan *edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

It's heavy stuff so I better get it boxed and weighed so I don't guess too low. I get a pretty good rate on UPS here at work so it might not be that bad. I'll post back tomorrow morning. Sorry, I sold the sway bar and brackets already.

Ok. Lemme know.

Originally posted by PsychO
How much shipped to Tamarac, Fl. 33319? I have a thread in search of this. Thanks _Jonathan *edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

UPS website showed $51 shipping insured for $250. Parts weight about 52 lbs on my scale plus a few pounds for all the packaging because I pack stuff good.

i would take the backing plates if you ever decide to split it up

Originally posted by azdave

Originally posted by PsychO How much shipped to Tamarac, Fl. 33319? I have a thread in search of this. Thanks _Jonathan *edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

UPS website showed $51 shipping insured for $250. Parts weight about 52 lbs on my scale plus a few pounds for all the packaging because I pack stuff good.

Whats your paypal?

Originally posted by PsychO

Originally posted by azdave

Originally posted by PsychO How much shipped to Tamarac, Fl. 33319? I have a thread in search of this. Thanks _Jonathan *edit* I see your selling the control arms and endlinks. Do you have a OEM rear sway with brackets and bushings? If so, how much for the lot?

UPS website showed $51 shipping insured for $250. Parts weight about 52 lbs on my scale plus a few pounds for all the packaging because I pack stuff good.

Whats your paypal?

PM with apology sent to PsychO.

I got a firm offer for $100 over my asking price and not having heard back from PsychO at that time, I accepted the higher offer.

Parts are sold.