I am selling this mock up Tubular Exhaust Manifold that I made. I used this first one to mainly mock up my design to ensure it would fit correctly. It is MIG welded. All it needs is a collector and a flange and its good to go. It is SCH10 304 stainless piping with a mild steel 420a flange. All piping is 1.5" ID. Note: If you are using stock radiator/fans, you will need to relocate the fan on the p/side to the front of the radiator. Depending on the size of the turbo you are using, you may need to also relocate the d/side fan as well, but only if your using anything bigger than a 60-1 (this is not for sure, just an guestimate). I am selling this manifold for mainly only what I have in material and 5-7 hours of labor in. $230 shipped gets it. I am guessing that no one will probably buy it because it does not have a collector on it, but they are not that hard to make, or even to have a local muffler shop make for you. I started to grind some of the welds down so they were smooth with the piping, but decided I was going to sell this one, so I did not finish them. I will finish them for an extra $50 or you can do so yourself or even leave them be, its up to you. If needed, I can supply a t3 flange for an extra $40 as well that is stainless steel. If I get no interest by Wednesday, it will go on ebay. Note: the 90 degree elbow that is not pictured in these pics is on now and welded, everything is welded and ready to go like I said, just needs a collector and a flange. URL=http://imageshack.us] http://imageshack.us> http://imageshack.us>
#103459, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 1
bump. will do $165 shipped guys. you do realize you would be one of the only ones with a badass manifold like this! shops would charge $500+ to make one of these suckers!
#103536, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 7
What is the difference in height from the top of the manifold flange to the highest point on the pre-collector 180* bends?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#103540, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 8
Originally posted by DarkOne What is the difference in height from the top of the manifold flange to the highest point on the pre-collector 180* bends?
i will let you know tomorrow. i have it up at my shop so i will take some measurements for you and PM you Dino.
#103581, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 8
Originally posted by DarkOne What is the difference in height from the top of the manifold flange to the highest point on the pre-collector 180* bends?
#103700, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 10
Hello, I was wondering if you still have your manifold for sale? I am very interested and i could paypal you the $165 right now for the manifold. Thank you, Brendon Jongeward
#103704, "RE: FS: Tubular Exhaust Manifold! (Akron, OH)" In response to Reply # 11
Originally posted by Jungy Hello, I was wondering if you still have your manifold for sale? I am very interested and i could paypal you the $165 right now for the manifold. Thank you, Brendon Jongeward
Search
Printer-friendly copy
2 Users in Chat
