#26396, "RE: How to Replace an Inner Tie Rod (Write-Up)" In response to In response to 14 Feb-14-05 04:09 PM by WickedESi
Removing rusted bolts (try in this order) --------------------- - impact wrench (easiest method) - PB Blaster (MULTIPLE soaks, let it sit over night too, then soak again right before you try removing it - DON'T use OPEN END or 12-POINT WRENCHES to try to remove stuck bolts, I recommend a hex socket w/ a breaker bar and/or long pipe (have someone hold it on the bolt so you don't slip and tear the head off) - Use a high temp torch (oxy-acetylene or a MAPP torch), this will always work, if it doesn't you didn't heat it high enough (be sure to turn the bolt while it's super hot), don't melt anything, or yourself
Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician