26396, RE: How to Replace an Inner Tie Rod (Write-Up) Posted by WickedESi, Dec-31-69 06:00 PM
Removing rusted bolts (try in this order) --------------------- - impact wrench (easiest method) - PB Blaster (MULTIPLE soaks, let it sit over night too, then soak again right before you try removing it - DON'T use OPEN END or 12-POINT WRENCHES to try to remove stuck bolts, I recommend a hex socket w/ a breaker bar and/or long pipe (have someone hold it on the bolt so you don't slip and tear the head off) - Use a high temp torch (oxy-acetylene or a MAPP torch), this will always work, if it doesn't you didn't heat it high enough (be sure to turn the bolt while it's super hot), don't melt anything, or yourself
|