Hey folks. It's been a looong time since I posted, but I can explain. This spring I posted up a GI thread:

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=114051&mode=full


Unfortunately in late May I was having extreme pain in my lower extremities; muscle weakness, sharp leg spasms etc. I went to my doctor, who ordered an MRI. I was diagnosed with a spinal cord tumor in my lower back. I had to have an emergeny surgery to try and remove it. Good news is that my neurosurgeon was able to get MOST of the tumor out. Bad news is that some of it is still attached to my spinal cord. Long story short, I was out of commission for the whole summer. I'm really lucky I guess. The situation could have been much worse.


I've recently started feeling back to normal and I managed to get a ton taken off of the Eclipse. I'm going to take some pictures when I get home from work today.


I want to say thanks to everyone for not flaming me when I stopped responding to pm's. It's been a rough time, but with luck, the part of the tumor that's still left won't cause me any trouble. (hopefully for a while anyway)

Feel free to PM me with any questions. Here are some of the parts I've got on the car:



Hahn turbo kit: super 20g (ceramic coated), manifold (ceramic coated), Large FMIC, all piping, oil feed/return lines, K&N air filter, FCD, Fuel pressure regulator, Walbro 255lph. (No downpipe included. I'm selling the 3" HRC Downpipe w/ the exhaust. $1800 + shipping

Hahn Portfueler: Mounting plate, Injectors, fuel rail, control module (set up for stage V), software. (No fuel pressure regulator) $650 +shipping

Thermal R&D 3" Turbo-back exhaust: 3" Hahn Eliminator downpipe, Hahn Hi-flo cat: $550 + shipping

Quaife LSD: will be sold with manual transmission. (local pickup only) $700 + shipping

Built bottom end: see signature for this. (local pickup only) $700 + shipping

Built head: see signature for this too. $550 + shipping

Cams: Crane #14 turbo-grind $175 + shipping

Fidanza adjustable cam gears: silver $120 + shipping

Fluidyne aluminum radiator: $250 + shipping

Flex-a-lite dual fans: $170 + shipping

Zeitronix ZT-2 Wideband w/lcd display: $250 + shipping

Greddy type RS blow off valve: $140 + shipping

Greddy Profec B Spec II electronic boost controller: $220 + shipping

MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $400 + shipping

Greddy 60mm peak & hold A/F gauge: $185 + shipping

Greddy 60mm peak & hold EGT gauge: $130 + shipping

Greddy 60mm peak & hold Boost gauge: $120 + shipping

Greddy 52mm oil pressure gauge: $70 + shipping

Greddy 52mm fuel pressure gauge: $70 + shipping

Driveshaft shop stage 2 axles: 400hp $550 + shipping

Falken Torque 5 18" with Falken Azenis Sport RT-615 Tires 225/40/18 (less than 1000 miles on them) $530 + shipping

Missing Link: $30 + shipping

Modern Performance 60mm throttle body: $140 + shipping



I still haven't taken the block, tranny, and axels off, (my back isn't 100% yet) but with some help from one of my brothers, friends, or anyone else, I can get those out really soon. I got 90% of everything off of the car.

I'm sure I've forgotten some things, but I'll add more as they occur to me.

Thanks a lot guys.

Bryan

'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859

PM sent on Modern TB.

hey whats up, i wanted to get some prices on the radiator/fan, and possibly the s20g.. i remember talking to you, but i dont have the old pms,, so hook me up with a price, thanx

PM's sent to both of you.

'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859

PM sent on bottom end.

I'm broke, it's broken. I'm broke because it's broken. It's broken because I'm broke.

Simplicity Car Club - Founding Member

can i get prices and pics for the exhaust,the portfueler, and the radiator?

Why did i turbo a 420a? Why is your 4g63 smoking in a ditch?

Pmed

Pmed

__________________________________________
All that is necessary for evil to prevail is for good men to do nothing.- Edmund Burke

HRC Stage IV

I am interested in the throttle body. If you aren't getting what you think it is worth PM me.

not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one.

Tim droppin the ball

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Originally posted by cs82685
not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one. Tim droppin the ball

'99gs with some "T": -HRC 20g-FMIC-Portfueler-500cc secondaries-stock primaries-Walbro 255lph fuel pump-p&p intake manifold, p&p head-5 angle valve job-Crane #14 cams-Fidanza adjustable cam gears-PT Cruiser lash adjusters and followers-Crane valve springs-ARP head studs-Built bottom end-JE 8.6 forged pistons-Eagle H-beam rods-Clevite bearings-Total Seal piston rings-Melling oil pump-solid front engine mount (XtremeRS-Matt)-prothane side and rear inserts-Fluidyne radiator-F-A-L slim fans-Thermal R&D 3" cat-back exhaust-HRC eliminator 3" dp-3" hi-flow cat-Greddy type RS bov-Greddy profec B spec-2 electronic boost controller-MSD DIS-2 programmable ignition-Optima red top (in trunk)-Zeitronix Zt-2 wideband A/F meter/datalogger-Greddy gauges: 60mm p/h: boost,egt,a/f- 52mm: oil pressure, fuel pressure-Nology Hot wires-Denso plugs-Missing Link-Eibach pro-kit springs-KYB AGX adjustable shocks-18" Falken Torque 5 (gunmetal)-Falken Ziex 512 225-40-18-empty wallet : (

to do list: brakes, paint, interior


http://www.cardomain.com/ride/570859