Hey folks. It's been a looong time since I posted, but I can explain. This spring I posted up a GI thread:

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=16&topic_id=114051&mode=full


Unfortunately in late May I was having extreme pain in my lower extremities; muscle weakness, sharp leg spasms etc. I went to my doctor, who ordered an MRI. I was diagnosed with a spinal cord tumor in my lower back. I had to have an emergeny surgery to try and remove it. Good news is that my neurosurgeon was able to get MOST of the tumor out. Bad news is that some of it is still attached to my spinal cord. Long story short, I was out of commission for the whole summer. I'm really lucky I guess. The situation could have been much worse.


I've recently started feeling back to normal and I managed to get a ton taken off of the Eclipse. I'm going to take some pictures when I get home from work today.


I want to say thanks to everyone for not flaming me when I stopped responding to pm's. It's been a rough time, but with luck, the part of the tumor that's still left won't cause me any trouble. (hopefully for a while anyway)

Feel free to PM me with any questions. Here are some of the parts I've got on the car:



Hahn turbo kit: super 20g (ceramic coated), manifold (ceramic coated), Large FMIC, all piping, oil feed/return lines, K&N air filter, FCD, Fuel pressure regulator, Walbro 255lph. (No downpipe included. I'm selling the 3" HRC Downpipe w/ the exhaust. $1800 + shipping

Hahn Portfueler: Mounting plate, Injectors, fuel rail, control module (set up for stage V), software. (No fuel pressure regulator) $650 +shipping

Thermal R&D 3" Turbo-back exhaust: 3" Hahn Eliminator downpipe, Hahn Hi-flo cat: $550 + shipping

Quaife LSD: will be sold with manual transmission. (local pickup only) $700 + shipping

Built bottom end: see signature for this. (local pickup only) $700 + shipping

Built head: see signature for this too. $550 + shipping

Cams: Crane #14 turbo-grind $175 + shipping

Fidanza adjustable cam gears: silver $120 + shipping

Fluidyne aluminum radiator: $250 + shipping

Flex-a-lite dual fans: $170 + shipping

Zeitronix ZT-2 Wideband w/lcd display: $250 + shipping

Greddy type RS blow off valve: $140 + shipping

Greddy Profec B Spec II electronic boost controller: $220 + shipping

MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $400 + shipping

Greddy 60mm peak & hold A/F gauge: $185 + shipping

Greddy 60mm peak & hold EGT gauge: $130 + shipping

Greddy 60mm peak & hold Boost gauge: $120 + shipping

Greddy 52mm oil pressure gauge: $70 + shipping

Greddy 52mm fuel pressure gauge: $70 + shipping

Driveshaft shop stage 2 axles: 400hp $550 + shipping

Falken Torque 5 18" with Falken Azenis Sport RT-615 Tires 225/40/18 (less than 1000 miles on them) $530 + shipping

Missing Link: $30 + shipping

Modern Performance 60mm throttle body: $140 + shipping



I still haven't taken the block, tranny, and axels off, (my back isn't 100% yet) but with some help from one of my brothers, friends, or anyone else, I can get those out really soon. I got 90% of everything off of the car.

I'm sure I've forgotten some things, but I'll add more as they occur to me.

Thanks a lot guys.

Bryan

PM sent on Modern TB.

hey whats up, i wanted to get some prices on the radiator/fan, and possibly the s20g.. i remember talking to you, but i dont have the old pms,, so hook me up with a price, thanx

PM's sent to both of you.

PM sent on bottom end.

can i get prices and pics for the exhaust,the portfueler, and the radiator?

Pmed

Pmed

I am interested in the throttle body. If you aren't getting what you think it is worth PM me.

not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one.

Tim droppin the ball :P

Originally posted by cs82685
not to bust your balls, but the rules say you need to put a price in your listing. Please edit your listing to include prices on at least most of the stuff. If you want to just copy and paste the list and put it in a new thread with prices that's fine then I'll lock this one. Tim droppin the ball :P

Sorry about that. The original post has been edited with prices.

will you do 500 shipped for the radiator and wideband?

Still in for $140 on the throttle body if someone hasn't already agreed to it.

pm's sent to both of you.

im getting you pms, i may also be interested in the portfueler

Originally posted by Raine883
im getting you pms, i may also be interested in the portfueler

Cool man. Let me know.

Forgot to mention; the Portfueler injectors are 500cc.

Also, if there's something that I didn't list, feel free to send me a pm and ask me about it. Thanks.

All pm's answered.

Fluidyne Radiator SOLD

FAL fans SOLD

Zeitronix wideband SOLD

MP 60mm TB SOLD

Block, head, cams, cam gears, on hold until Friday.

I WAS LOOKING FOR A BUILT BLOCK AND HEAD ABOUT 2 WEEKS AGO :(

HAD TO BUY A REBUILT ONE LOCALLY TO WORK ON

BUMP FOR THIS GUY

pm sent!

Head SOLD

Block SOLD

Cams SOLD

Cam Gears SOLD

MP TB received :)

Hey guys. I've decided to part the turbo kit out too. Here are the prices:

Hahn FMIC - $475 plus shipping (add $75 if you want the IC piping. The piping is powder coated maroon to match the car)

Hahn Super 20G w/15psi actuator (Ceramic coated) - $650 plus shipping

Hahn turbo manifold (Ceramic coated) - $475 plus shipping (it's tapped for an EGT gauge)

Walbro 255lph - $50 plus shipping

Aeromotive 1:1 fuel pressure regulator - $90 plus shipping

'99 rear spoiler (see sig. for pic) - $100 plus shipping

Quaife LSD: will be sold with manual transmission. (local pickup only) $700 + shipping (*** this didn't seem too clear after I re-read it. The quaife is installed in the tranny. It's a 5-spd.***)

I also forgot to mention that the MSD comes with the software.

Thanks guys.

Portfueler, Exhaust, and Super 20g are on hold until Thursday evening.

The DSS axles have been taken off of the car now. Please pm me with any questions.

Exhaust SOLD

Portfueler SOLD

Super 20g SOLD

Originally posted by wickedtalon

Originally posted by devvin

Originally posted by wickedtalon

Originally posted by devvin

Originally posted by wickedtalon

Originally posted by devvin

Originally posted by wickedtalon
Interested in downpipe and exhaust. Let me know how much you'd be willing to part for.

The full turbo-back exhaust will be sold for $500 + shipping. It's the 3" downpipe with O2 bung, flex pipe, high-flow cat and 3"cat-back thermal R&D. I got it from Hahn.

Thanks,
Bryan

Sep 23rd 2009 I'll still take the exhaust now that you're back in action. Let me know how much shipping is to Cincinnati 45011. Thanks.

Jim

Cool. I'll weigh it when I get home and figure out the shipping costs. I'm afraid that the shipping might be expensive because of the size of the parts, but I'll let you know tonight.

Thanks

Bryan

Would you be able to email me a couple pics? jim@--.com I may consider a road trip but your about 8 hours from me so shipping would be prefered.

Sep 23rd 2009 No problem. I'll take some pics when I get home. The muffler has a dent in it. It's nothing visible when you're driving, but I want to give full disclosure. That's why I knocked the price down some. I'll email you the pics this evening, along with an estimate on shipping.

Oct 05th 2009 Did you get an estimate on shipping fo the exhaust?

Oct 05th 2009 Yeah man. I'm sorry. The UPS site is saying that it'll be around $160 to ship it. If you want it, we can call the shipping $160 and if it's less, I'll paypal you the difference. There is another guy who is saying he wants the exhaust too though. He hasn't said he's sending the payment yet, but he said he wants it. I guess it's just a matter of who pays for it first. I can ship it out tomorrow or Wednesday. Sorry I didn't get back to you with the shipping price. I thought that I did. Ugh, I'm sending too many pm's lately. haha.

Let me know man

Bryan

No reply on sending my payment.
What a dick move.

That's uncalled for man. Someone else had already sent me a payment and I was waiting for it to clear. I'm sorry if I didn't respond fast enough for you. I have been straightforward and fair with everyone I've dealt with during this sale. Anyone who has purchased parts from me will vouch for that I'm sure. I don't appreciate this type of childishness in my thread. It's rude. You could have sent me a pm if you had a grievance with me. Not cool. Please don't clog this thread up with your unwarranted insults. I'm trying to sell parts from my car, not get into some forum argument. Thanks.

I thought we were in process of transaction. Seriously. When someone says "I'll take it" they usually send cash once they have the total + shipping. I asked for shipping amount so I could send the cash to have it shipped. By the time you gave me shipping amount you've sold to someone else. Not cool.

You said "I'll take it" about 3 hours after somebody had already sent me the payment. I understand that you're mad, but somebody else just beat you to it. I made you aware that someone else was interested in the exhaust. Please don't insinuate that I've been unfair. It's not correct.

That's it though. I'm not talking about this anymore.

Fuel Pressure Regulator - SOLD

Hey guys. I took some pictures today of some of the parts. I'll take more either tonight or tomorrow. The sale isn't limited to just what I have listed. If there is anything you want that I haven't listed, just send me a pm and we can figure it out.


Greddy type RS blow off valve: $140 + shipping


Greddy Profec B Spec II electronic boost controller: $220 + shipping


MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $400 + shipping


Greddy 60mm peak & hold EGT gauge: $130 + shipping


Greddy 60mm peak & hold Boost gauge: $120 + shipping


Greddy 52mm oil pressure gauge: $70 + shipping


Greddy 52mm fuel pressure gauge: $70 + shipping


Missing Link: $30 + shipping


Intercooler piping: $75 + shipping


I'll photo the tranny, axles, wheels/tires, spoiler, tonight or tomorrow.

Thanks!

I just recieved my parts I purchased from devvin. Very impressed with his great description of the parts and his honesty during the transaction. I would recomeened buying from him to anyone!

waitin on pics and price shipped to 06770 of axles. do these axles also come with the hubs or do these axles utalize OE hubs.

PM sent.

bump

can you do a better price on the profec b? It can be found on ebay for 230 shipped (NEW)...

Hey guys. Bump and updated prices.


Greddy type RS blow off valve: $100 + shipping


Greddy Profec B Spec II electronic boost controller: $150 + shipping


MSD DIS 2 programmable ignition: with tach adapter and 3 bar map sensor. $275 + shipping


Greddy 60mm peak & hold EGT gauge: $90 + shipping


Greddy 60mm peak & hold Boost gauge: $90 + shipping


Greddy 52mm oil pressure gauge: $40 + shipping


Greddy 52mm fuel pressure gauge: $40 + shipping


Missing Link: $20 + shipping

HRC FMIC: $300 + shipping



Intercooler piping: $55 + shipping


DSS Stage II axles (400hp): $350 + shipping


5spd Tranny with Quaife LSD. (local pickup only) $450


Falken Torque 5 18" with Falken Azenis Sport RT-615 Tires 225/40/18 (less than 1000 miles on them) $400 + shipping


'99 Rear Spoiler (gsx style): $75 + shipping.

I'll be taking the sideskirts off soon. Please let me know if there is anything not listed that you need. Thanks!

PM'ed

Originally posted by CODE4
PM'ed

Are you going to respond to my PM?

Transmission sold.

MSD and axles on hold until Monday.

PM'd regarding gauge pillar pods and stock cluster.

PM sent.

DSS axles - SOLD

MSD DIS 2 - SOLD

Greddy boost gauge - SOLD

Greddy EGT gauge - SOLD