96 eagle talon MTX, no power doors cloth grey interior.

Motor sale pending with Intake exhaust VC and oil pan taken.

Trans is good working order, will sell that as a MTX swap kit for 1000.
Included:
MTX
3 motor mounts
3 mount brackets
Stock clutch
Reverse and speed sensor with sensor plugs and 3' of wire to modify your harness
96 MTX ECU
Clutch master and slave with lines
Clutch pedal and Brake pedal
Shifter assy with cables
Shifter boot
MTX Gauges
All bolts and hardware to complete the swap.


The interior is complete and in good shape. Pass trunk panel is cracked.

Does not have rear disc setup

Let me know what your looking for

Terry

Post edited for cleanliness

Parts spoken for:
Motor complete as pulled - Talonized
Trans swap - Eclipsesix
hatch struts - 96rs-t
Exhaust mid section and Cat - Evulflea 30.+ship
Rear seat and outer door moulding - Mike Homan 45.00 + ship or P/U
TPS, IAC, CLT, Alt conns - VelocitaPaola

Other info:
Pass fender is not reuseable, has some rust in the flange where the bumper bolts to it.

Terry

how much for the wondow/door trim mouldings... the parts that go on the door (drivers) on both sides of the glass (squeege looking things). And the rubber part that the top edge of the glass seals to. If its not cracked from the sun... goes on the ext of the car btw.

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

Ivan, Mike Homan has claimed the rubber moulding outside the door. the inside is still available. the outer top trim is beaten. those would need to be painted.

Edit: The part the glass seals to is the weather stripping Ivan. That is in perfect shape.

Make me an offer if you still want the inside moulding and weather strip. Shipping should be about 15.00


Terry

payment sent on trans swap parts

Terry, can i get the brackets that mount the radio to the center console ? Mine were stolen awhile ago and I have been meaning to get some. Thanks

Sure. Make me an offer, just include 5.00 for shipping usps.

Thanks

Terry

I swear I replied to this thread...

Anyway, sending the exhaust? Got a price + shipping yet?

------------------------------------------------
98 ESi
95 GS

you did i deleted it because i condensed everyhting for ease of reading. YOur info is posted in the second post under parts spoken for.

I will get you a shipping ect quote during the week next week.

Terry

Terry, you still have all the head light plugs and stuff? Stuff we chatted about a while back.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Yea, dunno what you said about the carpet, lol. Get back at me.

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

I sen tyou a picture and the price was 20.00 shipped

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

Yes i Do, i need to know exactly what plug you need Thura

Terry

The plug that goes into the bulb itself terry ... plus about 6" of the harness if possible.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

I saw that the intake and vc were sold, but didn't know if that included everything attached to them. If not, do you have that hose that goes from the intake manifold to the valve cover

I contributed to the Wiki!
EVO IX - just a really expensive boost gauge and a K&N air filter
96 Eclipse RS -awaiting registration and inspection
95 Eclipse GS - parts car
Mods/Profile - http://www.2gnt.com/index.php?d=cs82685

Yep. Just get me as much wire as you can. I can add additional length if I need to. Thanks.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

Did you already sell the carpet, or did the other guy back out?

DSM= Doesn't Start Monthly

I still have the entire carpet.

flat pin harness for ignition coil and enough wire to swap out the round pin. Those headlights you were talking about, the gauges you were talking about, and you to pick up your phone so I can come down and rummage through your garage.

Sorry nick. Been busy between work and trying to make sure things are out in the mail in time.

Sunday might work if its later in the afternoon.

I have the connector, headlights, i forget what gauges you wanted.

Terry

1998 Eclipse GS

GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|

After this comming friday all parts will be gone so if you want something pay and claim it otherwise forget it.

Do you have all the Relays? Also need the hood release, and Ummm the EGR w/ Vaccumm Line...Thanks Terry I know its all bullshit small stuff.

Turbo8u - "I've never heard so many BOV's in my life at once..." (At So. Cali Meet-Up Sep. 25th)

Me - "I don't think I lost the love for my car, I think the cops took it..."

I have the relays and hood release. Just make an offer and consider 5.00 shipping usps. Paypal is terrence.godfrey@sbcglobal.net

I will ship the next day.

Terry

u got a frontbumber?

Are you talking about the bumer cover or the impact bar. I havre the 96 bumper cover but its in so so shape. the impact bar is fine.

Terry

i want the wooden trunk board terry with the hinges. just ship it the cheapest method possible let me know how much to 72076

edit: im moving to a new address in 10 days so just let me know when you can send it so i know which address to give ya. thanks again.

Why dont i want 4-5 days and get it to the new address to avoid any issues. I will get you a quote tomarrow.

Terry