This is half new half used. It has a new (never used) Clutch Masters stage 4 disk, A used (for a month and a half) Clutch Masters aluminum flywheel BUT has a new (never used) surface area installed on it by Clutch Masters, has a used (for a month and a half) pressure plate that wasn’t touched by Clutch Masters because it is in perfect condition.

The story:

The clutch started out as a stage 3 non modular clutch w/ light weight aluminum flywheel. It wasn’t even close to being able to hold all my power, it liked to slip at ~13psi. I called Clutch Masters and they pro rated it for me to a stage 4. They gave me a new disk and reset the flywheel to new. So basically other than a little dirt and install scratches on the outside of the pressure plate it is a bran new clutch.

Retail for the flywheel ~440 and retail on the clutch is ~450 for a total of ~890.00

Selling for 600.00+shipping

Will not separate the flywheel from clutch kit.

If you are interested e-mail me williams_brain_99@yahoo.com

I am selling it because I bought a new one while CM had this one.

Does that include installation??

Are you serious???

>Does that include installation??
bwahahahahahaha ^^

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

Of course Im not serious, I just know how you are about tranny work lol. I have no need for a clutch, especially one like that.

Would you consider separating the clutch from the flywheel?

If so, I might like to buy the clutch from ya.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)