ok, i got the calipers brackets and allhardware, the only thing you would need is rotors and pads

the calipers and brackets came off a junk yard gsx ther used

the hardware is all bran spankin new dave (spooledupracing) can attest to this seeing i orderd the shit trough him

the hardware consist of: caliper pins, rubber boots that go inthe caliper brackets, and the pad clips

id like to get 150+ shipping on this stuff

got a bare block, comes with bed plate 100 bux picked up the thing still has the factory cross hatch in the honing

stock crank 50 bux + shipping, needs to be polished is all, nothin big

starter for the 420a, works perfect 20 + shipping

water pump 10 bux +shipping i guess

i also have various bolts (main head ect) from the breakdown of the block above

crank sprocket, mint condition 25 bux + shipping

oil filter bolt (the one the oil filter actually screws onto) make offer

just to make it easyer on me, instead of typign every damn nut and bolt i got ill just say i got EVERY nut and bolt that came out of the block

flywheel askin for 25 + shipping

i got some more stuff i know it bt cant remember at this moment will update when i think ofem

all prices negotiable

im in baltimore MD

bump

Do you have all 4 motor mounts with brackets? Also the 2 front crossmember bolts? Let me know how much shipped to 73145. Thanks.

1995 RS-T @ 6psi......daily driver

Custom Stage 2 Turbo, Autometer gauges, K&N filter, 60MM Jeep TB, p&p intake manifold, 3" SS exhaust, test pipe, home-made polyurethane motor mounts & ES bushings, short shifter, Greddy shift knob, crankscraper

1999 GST......almost stock!

hard i/c pipes, intake, Greddy BOV, Greddy EVO 60mm catback exhaust, 3" SS downpipe, Autometer gauges


"Originally posted by DR1665
...Harry. My car topped out at 140 this morning. I need "turvo." Two of 'em. And Harry, I need the glue to be dry by tonight. Lata"

nope already sold t hem sorry

Interested in the Block and Crank. I'll pickup instead of shipping.

You didn't say in your post, but I'm assuming that this block is a 420A and is not cracked and is in generally in good shape. If its from a 420a let me know and I'll come get it this weekend or next weekend.

you can swing by tomarrow is you would like, ill throw in the waterpump, oil pickup tube, stock sohc pistons and rods, you can have everything i got that came off the engine

Did it come out of a 95 SOHC or a 96-99 SOHC.

95

all you have to do is plug the pcv holes inthe front, not a big deal.

Sorry, I was looking for a 96-99.

no problem i can probly get you a complete block for liek 200, comes with pistons and rods too

bump on th e block? 80 bucks picked up?

P.M. Sent for the Starter!

-Custom Hahn Racecraft Stage 2 Kit.
-Hahn FMIC
-2.5 Downpipe (Upgrading to 3")
-270cc injectors (Upgrading to 550cc)
-16g Turbo/8 lbs (Upgrading to 17lbs with mechanical boost controller)
-Custom FPR (Upgrading to S-FMU)
-Wiesco 8:8:1 CPR Pistons
-Eagle H Beams
-ARP Main/Head studs
-Centerforce dual friction stage 3
-Dyno Tune Comming Jan-07...

I have a 96 dohc 2.0 420a.Do you have the same block? I am in Florida, but might be able to arrange transport. You were saying you can get short blocks for $200?

I know I've probably said this before but we should meet up somewhere in bmore. I'm in dundalk. I'd like to get a couple local 2gnt's together for fun one night. IM ME sikeX on AIM. or sike@comcast.net