I am looking to buy anyones aeromotive -6an fuel fittings that bolt to the regulator and has the o-rings. I also need a hex bolt that plugs into the regulator. PM me if you got any, Thanks.

summitracing.com

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

Jegs.com, Summitracing as prevoiusly mentioned...etc. If your using AN line you need to use the same fittings for the type of braided line your running for your hose ends. The male to male fitting that actually goes into the aeromotive can be any brand but be sure your hose ends are the same company that manufactured your line.

Your hex key can be had at any sears hardware, when i get home i can tell you exactly which one you need.

400whp or bust.

Don't I need the aeromotive fittings that have the O-rings on them to seal?

I'm using jegs fittings in my fpr, previously i had Russell. Any -06an fitting will work, you can buy the o-rings from Russell as well.

400whp or bust.