i have a 97 eclipse rs that i rolled at 100+mph ... u can e-mail me or post a reply...i'll see what i can do... give me the following info::: part(s) wanted(needed) and an offer...no performance parts





<--Eclipse Racer-->

DIBBS ON THE FUEL RAIL!!!!!!!!!!!
I need the fuel rail as long as it has the test port on the very left end of that rail. Basicly look at one end for the feed fitting and if the other end has a little cap for the test port, that's the one I need. And I also need the feed hose that goes from the fuel filter to the fuel rail. I need these parts ASAP so let me know. You also do not have an e-mail listed so I sent you a PM

I edited to the wiki!

how much for the tranny?

kirby~~~ how much will u give me if it is the right fuel rail?


motor-tek~~~ how much will u give for the tranny? what do u want the complete swap or just the tranny?





<--Eclipse Racer-->

well depending on how much you want for the whole swap, I juss need the tranny, but i only have like $400 to spend right now. So I mean, if you really wanna get rid of the whole swap for $400, i'll take it, otherwise i juss need a tranny and clutch

have the screws that go in the hatch? need one that holds the hatch cover open by the rope.. and a few that hold down the floor.. those black ones

if u have the reverse light housings, ill take them

WOW....I hope you feel ok...

Um..give us details on the car...if youhave any pics that would be great. It's alot easier to part out a car when people can see pics of interior and exterior. Hmmm it really helps since you rolled it over, so we can see what's left..

.......Less questions for you.

By the way, what color interior??

man are you okay? what happened?

I'll take the front bumper, or is it really effed up? what are you going to do with the valve train?

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

i need the driver side outside door handle preferrably black. if you have one e-mail me at ta_mike@hotmail.com with how much you want for it.

98 eclipse gs
star stage 2 w/ bb, 8.6:1 je pistons, eagle rods, web turbo grind cams, udp, clutchmasters aluminum flywheel, clutchmasters stage 3 clutch, hks aic 3, 8 injector setup, phantom grip lsd, datalogger

oil pan and powersteering crap? get back @ me

that boy K-Y
kbnkb@sbcglobal.net
talonky36 (aim)

04 srt-4 (low and slo)
96 talon esi (still broke make me an offer)

how bout the bracket that holds the stero along with the box thingy under it..i dont know what its called..
let me know how much..im thinkig..4dollars? i dont know
also would you happen to have the front bumper and what color is it...thanks
chaye21@aol.com

is the seats tan color? if so, how much to ship to 02171??

I paid $6 for the other rail I have so let's say $20 shipped (to 22407) for the rail and the fitting. How does that sound?

I edited to the wiki!

motor-tek....i was hoping to get close to 500 plus shiping...but i might be able to do sumin for a fellow member...400+shippin


nosdeclipse ...i have sumone in line for the whole door...but i'm about to get mine shaved...i try my best to get u the door handle


ghostesiky...how much will u give for them?


smoke honda... the seats are grey...i'm not sure on shipping






<--Eclipse Racer-->

motor-tek....i was hoping to get close to 500 plus shiping...but i might be able to do sumin for a fellow member...400+shippin


nosdeclipse ...i have sumone in line for the whole door...but i'm about to get mine shaved...i try my best to get u the door handle


ghostesiky...how much will u give for them?


smoke honda... the seats are grey...i'm not sure on shipping


kirby...i think i might be able to do that...



<--Eclipse Racer-->

i should have pics soon...i hope in 2-3 days...to help...i'll have to have sum1 put them up on the board...



<--Eclipse Racer-->

How much for your engine wiring harness and ecu? I'm trying to re-wire my 99 to match the 97 ecu for research for the rest of the 99 guys who want an AFX ECU...so don't go too hard on me

hey, ok, i'll do $400+shipping, is this for the whole swap? and the tranny works right? lemme know how much shipping is. if you wanna give me a call..i'll pm u my number

Jason

juss to make sure, this is a manual tranny right?

Ok let me know what you want to do... When do you think you will be able to check the rail to see if it is the right one? I'm going to PM you with the details or if you want drop me an e-mail through the site and I'll reply to get the details worked out. I'll give you my address, and shipping shouldn't be more that $5. Oh btw I'll also take the ashtray/cupholder piece that pops out of the console, how much do you want for that? just drop me a line bro.

I edited to the wiki!

I need:

Harness connector for the Cam Angle sensor, with a few inches of wire

Harness conencotr w/ a few inches of wire from the Vehicle Speed sensor.. and the sensor itself.

Give you $50 right now if you go outside, cut those harness ends, take out the speed sensor, and mail it all to the 77002 area code.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

what about the front bumper & head?

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

if its a manual, i really need the center console, dosent have to be pretty.

how does 40.00 shipped sound??

USED TO HAVE...Everything you wish you had, and then some...

You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)

Greg, I'm posting this PIC so that you know exactly what I need. I have 2 96 rails at my house that are not the right part.......lol The test port has to be on the "end cap" of the rail, and the fitting goes in the other end, and the hose runs to the fuel filter. I can only use the rail if it has the testport on the very end.

Here is a pic from corbins site that looks at the rail from the side. I have highlited the proper place for the test ports to be. That hose goes from testport to testport.

I edited to the wiki!

Re post of the first pic from my last post.

I edited to the wiki!

I NEED A PASNGER SIDE DOOR(WHOLE) if its not in too bad of a shape ill give you $100 plus shiping if your intrested e-mail me @ will4u2k@yahoo.com

If your bumper still has all its paint your not low enough

hey man.. i need the inner fender well plastic parts... let me know if you have then.. also if the front inst to bad i need some support braces for the front bumper.. let me know.. thanks
Mike
AIM: EatBoost97
speeddesigns@hotmail.com

1997 Mitsubishi Eclipse GS
My other ride is your girlfriend.

If the headlights are still O.K. let me know I'll take those off your hands, By the way good to see that you came out ok!

Do you have the RPM gauge? And if you do, think it will interchange with a 96 RS? Thanks.

~Jennie~

Greg, I'm posting this PIC so that you know exactly what I need. I have 2 96 rails at my house that are not the right part.......lol The test port has to be on the "end cap" of the rail, and the fitting goes in the other end, and the hose runs to the fuel filter. I can only use the rail if it has the testport on the very end.

Here is a pic from corbins site that looks at the rail from the side. I have highlited the proper place for the test ports to be. That hose goes from testport to testport.

This time the pics should stay long enough for you to see them. So which rail do you have?

I edited to the wiki!

Is your interior gray? If so then I could use the cup holder ashtray popout section, that is if Kirby doesnt get it, he's got first dibs.
email me at Bustacones5@aol.com
-Mike

-Mike

December 2, 2002: I finally get a 2gnt
1997 Talon Esi AT

If the interior is grey i need the two vents that are on the tops of the doors. They are the side window defrost vents. and I also need this piece right here, it is the little plastic piece that slides the seat back and forth.

http://www.we-todd-did-racing.com/wetoddimage.wtdr?i=wNDQ4NDg2czQxM2RmZDMxeTU0MQ%3D%3D

Let me know I can paypal the money right away.
-Chris b. (djtrickee@earthlink.net)

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

If you have that panel thing that goes around the stereo/AC knobs area, I would be interested in that. Color does not matter. I'll give you like $5 + shipping or something. Let me know. My email is: saltonaslug@yahoo.com. Thanks.

Chris

________________
Chris
'90 TSi AWD - Soon to be a built winter beater
'91 TSi AWD - For parts

http://www.kaptainmyke.com

Is your coolant res intact? if so 10 bucks for it
97 Eclipse GS
Mods: AEM CAI, OBX muffler, Goldline springs, FU/RU STBs, Platinum plugs, Ingalls f&r camber kits, AFX UDP

How much for the Front windshield wiper cap? Mine is gone. I'd also like to get the rear hatch seal if its possible to get it out.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

anyone else want in on the oders??? i'm about to get a talon that has been wreeked in the front and a 97 eclipse gd that has been rolled...after i part these out i'm goin to buy more...maybe i can get a 4g63 car and sell sum1 a 4g63 swap..lol



<--Eclipse Racer-->

what about ^? you never told me if you had those parts or not.

Having Problems? Heres my Three step solution to anything 2gnt related.
Step 1: Put down everything in your hands.
Step 2: Grab a lucky strike, Smoke it.
Step 3: Walk to the fridge, double fist some keystone ice, sit down in the shade, drink one beer, finish cigarette, drink other beer, roll a joint, smoke it, walk back to your problem, and in about 5 minutes the solution will come to you.
If not. Go here: here

If still nothing, your trying to hard. Start over at step 1.

What about the transmission, AT or MT?

Goog

Formerly Joe B Slow
Hi.
AIM: brohymn411
Email: brohymn411@hotmail.com

ph33r me im l33t: I'm like
ph33r me im l33t: petting the tranny cooler
ph33r me im l33t: it looks like a baby intercooler
ph33r me im l33t: it's so cute
ph33r me im l33t: seriously man
ph33r me im l33t: it's like
ph33r me im l33t: I flow shit
ph33r me im l33t: what now
ph33r me im l33t: I cool that bitch down

Hey Greg I need 2 of the rails I was telling you about. Did you ever check the rail you have? Please drop me an e-mail so we can talk, I need these parts ASAP so I can make the system ready to install, and I need a rail to take to the fabricater.

I edited to the wiki!

hey if you ever come accross a red front bumper from a 97 let me know..
chaye21@aol.com

hey I need the motor mounts , how much shipped to Winter Park Fl , 32792 , let me know , e mail me josemex36@hotmail.com

<>
Tanabe cat back
injen air intake

i need the relay for the blower motor under the glove compartment....

2006 WW IX MR
2003 BBY EVO VIII (sold)
256.9WHP & 277.9torque
http://s90395832.onlinehome.us/forum//index.php?sid=a70942a7f65043e6c873e12dcd300692

1998 Eclipse RS --show car--

Front Friver's inner wheelwell plastic piece....goes between the bumper and the metal it's self...have one?