I've post this before with little success.

As the title says 97 Eagle Talon Part Out

The car is black, but wrecked on both sides of the rear end.

The center peice of the tail lights is in good condition along with the driver side tail light.

It has plastic grey door panels with grey cloth interior

Blown Engine.. also i will let that go very cheap

The car has a red hood.. with some scratches and rust, but very fixable.

If there is Anything any body wants im will let go very cheap.

I also have a damaged 98 Eclipse front end for sale.. That i can let go for very cheap.

Basicly i just need to get rid of the thing, but i want to make a little money off it.

Name your part and your price.

Im located at 44260 Mogadore,Ohio. 10 Min from Downtown Akron.

IF you start to part it out i need a section of the drivers front corner. I am talking about the actual chassis under the fender. If you have two close to perfect front fends i would be interested. If need be i can drive out to you and cut it myself.

Sorry i am not at the point to just buy the whole car from you so i understand if you find a buyer fro the whole thing.

Terry

Terry,
If he's unwilling or unable to cut the core support I have a complete core support I'll be cutting out of my 95 RS once I get home from Iraq. It was a roll over but all the damage was to the rear of the car. I'll be home in jan-feb time frame. PM me if he can't get you your parts and we'll work out details.

On the Talon though If it's a power window car I need the drover's door speaker grill (just the screen mesh),I'll give you $10 plus shipping. Might be willing to take the side skirts depending on the price. PM me your info and your asking price for the skirts shipped to 14428. I'll paypal you for the screen immediately.

-Kevin

________________________________________
95 Eclipse RS - Rolled
96 Eclipse GS - Traded
95 Eclipse GSX- Sold
01 Blazer LS 4.3/5spd dropped and clean DD
88 Camaro RS 361 CID with a 6spd and a bar 10 second street car on motor.

its not really the core support. I need the sheet metal behind the core support under the fuse panel in the engien bay. The sheet metal does weld to the core support however so you would be cutting that to remove all of it. Open the hood and look under the fuse panel. Where the harness goes through the hole, i need all of that metal right there and up the headlight.

-MIKE-

Stroked 2.2L

Does the car still have the factory stereo/CD?
I'm looking to replace the one in my 95 Talon.

1995 Eagle Talon ESI
5-spd
K&N

2005 Ford Mustang GT
5-spd
K&N
Diablosport Predator
Ford Racing Axle-back GTAs

2003 Nissan 350Z
6-spd
NISMO LMGT4 Silver wheels
NISMO Cat-back
NISMO CAI



http://www.cardomain.com/ride/528103

No factory sterio.

And as for the fenders.. they are close to perfect.

Come out and cut away.

does your center console have the flip up armrest piece by chance?

Also I need the damn little push in actuators that turn the interior lights on when the door is open if you dont mind by chance. Have no clue what they are worth though..

Im in Southern Maryland 20659

Woody

First 2k Neon with SRT Swap. Full Swap
Owner of a 97 eclipse RS.
Lets see how long this stays stock.

do you still have hige rise talon wing??

f/s
Evo III 16g turbo brand new
1g turbo head
Rebuilt 6bolt turbo block

I need the black pins that hold up the cargo cover, the clear plastic gauge cover on the intrument panel. And maybe the driver's side wheel well cover that covers the back of the front bumper.

New Car:
2004 350z base, Nismo CAI, pioneer avic-n1 (dvd, cd, navi)



Old Car:
1998 GS with hrc stage 2, HID 6000k conversion kit, AEM UEGO wideband, sfmu, ml, prokits, Greddy warning gauges: egt, boost gauge, and oil pressure, apexi tt, haydans tranny cooler, costum dp, groundwires, dynotune fp gauge. gst muff, turbo spoiler
Boostin since Aug 03.

nothing like driving with the windows down and the music low: i love hearing the turbo spool, swwwhhhttt!!!!

what about the rear floor for the trunk? not the carpet, just the board that covers the spare tire, also the inside trim on the rearview mirrors (manual)?
-----------------------------------
97 RS-T, STAR Stage 2, Decah Lambo Doors, 19" Axis Hiros, Built 420a
-----------------------------------

Yeah if it has power mirrors I need that interior trim too but only if they are power.

I edited to the wiki!

I think my bored is bent.. i'd have to check..
and as for the mirros this trim is good, but they are manual.

I pm'd you about the interior parts.

Woody

First 2k Neon with SRT Swap. Full Swap
Owner of a 97 eclipse RS.
Lets see how long this stays stock.

Do you have the stock shift knob?

-Eric


97 Eclipse RS
1/4: 16.15 @ 87.35mph

i mihgt come out there to pick up some things. PM sent

Eric want to make it a road trip this week

-MIKE-

Stroked 2.2L

I need passenger side motor mount. If its in good conditon I'll give you $30 shipped.

Manual tranny?

_________________________________________
1997 Mitsubishi Eclipse Spyder GS-T
1995 Eagle Talon Esi
1990 Eagle Talon TSi AWD
1991 Mitsubishi Eclipse GSX
1991 Mitsubishi Eclipse GSX

im interested in the door pannels send me a picture of them to davis_35@hotmail.com and also your switch for the ac in the panel by the cd player that controls the climate how much for that and the door panels send me a quote and some pictures to the address

Auto tranny..

So unless you want the auto shift knob.. sorry its an automatic.

i need a passenger side motor mount.

Do you still have the coil pack and CAS?

That blue car got me boobies once

i need the front passenger side compression arm for the suspension, let me know if you have it

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

do you still have the passenger front fender?
pics?
40$
i live like an hour from akron if that, could arrange to make a trip?
44089

baseballod05@yahoo.com

~-OBX 4-1 header and down-pipe, OBX 4' tip stainless steel muffler, AEM short ram intake, OBX 10.3mm ignition wires, Matrix upper strut bar, Eibach pro-kit, KYB GR-2 shocks-~

$25 + shipping to 23452 for all 3 trunk panels.

--------------------


- 05 Subaru STi
- 97 eclipse gs (289whp w/ 276tq)

There are a couple things I could use:

Coolant overflow resevoir
Front wheel well covers (the smaller peices in the very front)
Passenger side door lock actuator
Noise capacitor
Some (10+) of the metal clips that hold most of the interior together

There may be a few other things I could use if you're up to it. I have to think of them though. Hook me up!

email me at sike@comcast.net