Hello. I'd like to intrudoce myself. My name is XZiler8r (Real name Danny), originally from Avenger/Sebring Enthusiasts Club - ASEC. I've been doing custom angel eyes for a while now, and have had a lot of requests to make them. I have decided to try other boards as well, because I receive emails from a lot of different people in various car clubs. If anyone wants to try my sincerity and honesty on selling products, you can ask anyone over on ASEC. Enough know who I am and will attest to it. Here's what I have for you!
These are custom angel eyes that I make for inside the headlight housing. These are NOT HID or anything that will improve your ability to drive, only for "show" (however you would like to take that hehe). These are "rings" of light that you mount inside your headlight housing and it will emit a glow from inside with the LED's. I'm not sure if this message board provides IMG's but I'll give it a shot and post one up.
1 set consists of 2 "rings" fully assembled with the led's, resistors needed, and about 1 ft of red & black wires for your connection. I also send a full page of instructions if you are not sure how to connect them. It's a simple 12V installation, either to a parking/signal wire if you'd like or to a switch from inside the car. These mount on your low or high's depending how your headlight is setup.
My prices include USPS Priority within the 48 US states, Alaska & Hawaii must contact me if they will be shipped there. I can also ship them worldwide, just contact me for a correct estimate on shipping charges.
Colors: Red / Blue / Green / White / Orange / Yellow
If you're going to make a paypal transaction but with a CC, contact me for a different paypal account. I also take money orders & checks, contact me for my address.
I think that about covers everything, again it's my pleasure to become a member on this board and I hope to do business with some of you, as I have in my current car club.
#81496, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 1
Well sure, people can use that link to create them if they'd wish. MANY people that have bought it from me, have triedor just didnt want to waste the time attempting to make them, when they know someone who can instead. I'm not here to get upset when someone tries to step on my feet, I'm just here to offer a hand or a product to someone who might have a need for it.
But yeah if you'd rather make them for less than what I sell them for, than that's great.
#81515, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 2
Originally posted by XZiler8r Well sure, people can use that link to create them if they'd wish. MANY people that have bought it from me, have triedor just didnt want to waste the time attempting to make them, when they know someone who can instead. I'm not here to get upset when someone tries to step on my feet, I'm just here to offer a hand or a product to someone who might have a need for it. But yeah if you'd rather make them for less than what I sell them for, than that's great.
Sounds good. Don't listen to Crazy... He's well, He's crazy in the head.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#81516, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 3
Originally posted by djtrickee
Originally posted by XZiler8r Well sure, people can use that link to create them if they'd wish. MANY people that have bought it from me, have triedor just didnt want to waste the time attempting to make them, when they know someone who can instead. I'm not here to get upset when someone tries to step on my feet, I'm just here to offer a hand or a product to someone who might have a need for it. But yeah if you'd rather make them for less than what I sell them for, than that's great.
Sounds good. Don't listen to Crazy... He's well, He's crazy in the head.
Don't you mean "She" dj?
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#81532, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 4
Originally posted by totaleclipse_05
Originally posted by djtrickee
Originally posted by XZiler8r Well sure, people can use that link to create them if they'd wish. MANY people that have bought it from me, have triedor just didnt want to waste the time attempting to make them, when they know someone who can instead. I'm not here to get upset when someone tries to step on my feet, I'm just here to offer a hand or a product to someone who might have a need for it. But yeah if you'd rather make them for less than what I sell them for, than that's great.
Sounds good. Don't listen to Crazy... He's well, He's crazy in the head.
Don't you mean "She" dj?
????????
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
#81542, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 8
lol.
Yeah $50 is quite high considering the whole hard part is installing it into your headlights properly. Probably don't even take 15 mins to make those things.
#81547, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 9
I understand totally about the price. I USED to sell these at 30 for a set and 45 for 2 sets. The plastic is not expensive at all, the LED's w/ shipping would run say mid 10's, plus shippin about 4, plus the time making them (and no they dont take "15" minutes)
If you take the time considering I not only do 1, but I've done as many as 10 in a night, that takes a very long time to do. Melting the plastic, making sure they bend properly, cutting the slits, soldering everything together. I stand by my product w/ that price.
#81543, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 8
Originally posted by djtrickee
Originally posted by Jen
Originally posted by djtrickee
Originally posted by totaleclipse_05
Originally posted by djtrickee
Originally posted by XZiler8r Well sure, people ... great.
Sounds good. Don't listen to Crazy... He's well, He's crazy in the head.
Don't you mean "She" dj?
????????
He is actually a she.
??????
LOL crazyeclipse is a female, NOT a "he" haha
Mike D -------------------------------------------------------------------------------------------------
Originally posted by DR1665 You're welcome to all the beer you can drink, but you have to go get it yourself. Don't get pissy when we point to the fridge and tell you to get it yourself.
#81564, "RE: FS: Custom Angel Eyes For Headlights" In response to Reply # 12
Originally posted by Jen
Originally posted by djtrickee
Originally posted by Jen
Originally posted by djtrickee
Originally posted by totaleclipse_05
Originally posted by djtrickee
Originally posted by XZiler8r Well sure, people ... great.
Sounds good. Don't listen to Crazy... He's well, He's crazy in the head.
Don't you mean "She" dj?
????????
He is actually a she.
??????
What's so hard to understand???
shhhhhh I dont want anyone else to know.
With that baing said, I made myself these things myself. If I can do it, anyone else can certainly do it themselves. Hell, if he can sell these, I should be able to as well!
1998 GS-Turbo KANDY -- For Sale 1999 GS-Non Turbo 10th anniversary Edition
I have been in bed with Dino.....ask me for a picture!
Search
Printer-friendly copy
1 User in Chat
