custom built speaker enclosure made to hold 2 12" subs that can be mounted facing front or rear. The enclosure is ready for paint. The enclosure sits flush behind the rear seat and extends to fill the whole trunk area. It will fit all 2g eclipses. A simple mounting device will have to be made to hold it up. Custom glass enclosures of this size can cost upwards of $600. Because you will have to make your own mounting brackets I am selling for $250 plus shipping. Shipping for an item this large will be about $60. I am not a regular on this forum because I have sold my 2gnt but you can reach me at clean_rx8@yahoo.com. Feel free to ask any questions. Jared
#75145, "RE: FS: Custom built speaker enclosure" In response to Reply # 0
.... It looks like it could be cool...? But how do you even mount the subs to it? You would also need subs that dont require a box i suppose? I build glass boxes, and it looks like you forgot a few steps.
Don't sell your car to 16 year olds...
95 Eclipse RS - Sold for 6k, totalled three days later 91 Dodge Stealth R/T TT - 3" exhaust w/ no cats, eurethane motor mounts, 300M unbreakable output shaft, kevlar faced clutch, turbo XS BOV, 99 3000gt front conversion, carbon fiber hood. Dyno'd at 386hp. - SOLD! for 5k 98 Dodge Ram 1500 Club Cab 4x4 black on black.
#75148, "RE: FS: Custom built speaker enclosure" In response to Reply # 1 Jun-07-05 05:25 PM by tim97rs
Originally posted by Nine5eclipse03 it looks like you forgot a few steps.
not to mention some simple eyeballing for symetry. sorry man, but not a very good project, and certainly not worth $250.00. knock off $200.00 of that and maybe you'll get a bite... maybe....
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#75174, "RE: FS: Custom built speaker enclosure" In response to Reply # 2
Originally posted by tim97rs
Originally posted by Nine5eclipse03 it looks like you forgot a few steps.
not to mention some simple eyeballing for symetry. sorry man, but not a very good project, and certainly not worth $250.00. knock off $200.00 of that and maybe you'll get a bite... maybe....
nice idea though, I like the concept. you could build a bottom for this box no problem, but it'd be a pretty small box.
#75190, "RE: FS: Custom built speaker enclosure" In response to Reply # 5
man you guys are right, I didnt really think how much work would be left to do on this thing. The box sits right on top of the rear trunk panels and extends forward to the back of the rear seat. You could mount it by building some type of wood box underneath it, or if you are good with metal work you could build some sort of frame for it to sit on and screw in to. This is really doing me no good because it is just sitting in the way in my garage. I will take $125 shipped just to get rid of it so that somebody can use it. any questions, feel free to ask, Jared
#75268, "RE: FS: Custom built speaker enclosure" In response to Reply # 9
Originally posted by eclipse982nrRST
Originally posted by djtrickee Where is the Custom built speaker enclosure? All I see is a piece of mal-formed fiberglass, but no enclosure.
that will bust in half when 2 12's are mounted in it. looks liek an 1/8" thick. sell it on ebay, thats your best of luck, some goof will buy it for your price. i will give you $10 shipped for it though.
I'll give you $15.
1998 Eclipse GS
GS-T Axleback|CAI|OBX 4-1 Header|AF/X UDP|
Originally posted by Kaoz78 Did you happen to look at the post date of this topic? I didn't think so there Jesus. Way to raise Lazarus, buddy.
#75279, "RE: FS: Custom built speaker enclosure" In response to Reply # 10
Originally posted by dsmmyth
Originally posted by eclipse982nrRST
Originally posted by djtrickee Where is the Custom built speaker enclosure? All I see is a piece of mal-formed fiberglass, but no enclosure.
that will bust in half when 2 12's are mounted in it. looks liek an 1/8" thick. sell it on ebay, thats your best of luck, some goof will buy it for your price. i will give you $10 shipped for it though.
I'll give you $15.
hey he did a good job on sanding at least, he has some good effort into that. take it easy, he's just learning. with some bracing and another couple layers of glass it'd be well worth his original asking price. a place to mount the subs too would be nice, there is no lip to bolt them to
#75280, "RE: FS: Custom built speaker enclosure" In response to Reply # 11
Originally posted by BumpinTalon
Originally posted by dsmmyth
Originally posted by eclipse982nrRST
Originally posted by djtrickee Where is the Custom built speaker enclosure? All I see is a piece of mal-formed fiberglass, but no enclosure.
that will bust in half when 2 12's are mounted in it. looks liek an 1/8" thick. sell it on ebay, thats your best of luck, some goof will buy it for your price. i will give you $10 shipped for it though.
I'll give you $15.
hey he did a good job on sanding at least, he has some good effort into that. take it easy, he's just learning. with some bracing and another couple layers of glass it'd be well worth his original asking price. a place to mount the subs too would be nice, there is no lip to bolt them to
Very true, its a sick design, i can immagine poppin the hatch and seeing that, I'm almost considering buying it for near $100, and finishing the job, or using it as a mold.
Don't sell your car to 16 year olds...
95 Eclipse RS - Sold for 6k, totalled three days later 91 Dodge Stealth R/T TT - 3" exhaust w/ no cats, eurethane motor mounts, 300M unbreakable output shaft, kevlar faced clutch, turbo XS BOV, 99 3000gt front conversion, carbon fiber hood. Dyno'd at 386hp. - SOLD! for 5k 98 Dodge Ram 1500 Club Cab 4x4 black on black.
Search
Printer-friendly copy
2 Users in Chat
Don't sell your car to 16 year olds... 
