i have access to one of the largest salvage yards in the world and i get access to the cars before they are released to the public. i am willing to get parts for people for small fees just let me know what you need i will then get you a price and let you know if they have it . my email add is greeneclipse1996@yahoo.com

Is this an on-going offer or just right now?

its an on going offer whenever and whatever . i am looking to help people out and to help fund my project

im gunna prolly need a manual tranny, one that is in decent working order... to bolt up to my 99 420a...

hit me on email
seangordon@hotmail.com
im not on the board as much and would like to hear wat you could get one for...

thanks

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

i need a taillight sockets for a 99 eclipse..let me know i need them bad.

yeah i need the one closest to the center..the brake lights..thanks..i tried emailing you but they got sent back to me for some reason.lata

Where are you located? Do you have experience with and a source for shipping big things like motors and body panels?

i am located in pa i should be able to ship motors if people need them body panels should be no problem small stuff can go via ups fedex etc i also have a hook up at ups so i can't really see a problem with anything as long as people are willing to work with me

i am also in pa, where are you located, i may need a few things like a motor and other odds and ends. let me know where you are at and maybe i can save on shipping. e-mail ta_mike@hotmail.com

98 eclipse gs
star stage 2 w/ bb, 8.6:1 je pistons, eagle rods, web turbo grind cams, udp, clutchmasters aluminum flywheel, clutchmasters stage 3 clutch, hks aic 3, 8 injector setup, phantom grip lsd, datalogger

Alright I need one of those center grates for the air and heater next to the hazard and rear defroster buttons out of a 97+ or whatever will work for a 97. I need the left one of the two. If you cant get just the grate then I will take the whole thing with the buttons also. Also I need the power mirror thingy off to the left of the steering wheel also has fog lights on it, the whole thing that pulls out of the dash, I dont need any wiring. Last thing would be the passenger sun visor clip. Let me know how much here or e-mail me at stoyboycs@yahoo.com

Thanks,
Chri

I was right there with him untill the light turned green.

i'm looking for some gsx calipers.. let me know how much you can get some for. Thanks..
email : whodatt1@hotmail.com

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

I am in need of a Starter/Starter Solenoid Assembly. Can you get this? How much would it be all together with shipping to 65565?

EMAIL ME - Layton141@aol.com

Thanks,
Lee

I really really need a 95 ecu. Please let me know what you can do, i need it ASAP!!

EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

I need some 97-99 headlights... thanks for the hookup bro!

"Anyone who has never made a mistake has never tried anything new."
-Albert Einstein

if you can get me all the parts i need to convert my 98rs to have discs in the rear i'll pay u for parts, and i'll pay you quite a bit. Email me if interested.

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

bump

EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

ECU for a 91-94 turbo 5 speed all wheel drive.

I need the wire harness's that connect to the power window switches (both sides) and the harness's that connect to the fog lights. I also nees the IAC and TPS sensors (they are the two that are attached to the throttle body). Let me know at mikeduarte1@yahoo.ca

_______________________________________


95 Talon ESi-T

I need a passenger fender that is in good condition. No dents or creases, but any color is fine. i live in 97701

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

i need the oilpan off a 97-99 GST and oil feed line.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

ashtray/cupholder setup from the armrest area? gray color for 97+ (dunno if 95-96 was same).
Email me at Bustacones5@aol.com if ya got anything.
Thanks,
-Mike

-Mike

December 2, 2002: I finally get a 2gnt
1997 Talon Esi AT

alot of people got mail went to yard today got some stuff i will be doing this all wekend so bare with me . i am only asking that people cover the cost of the parts yard fee and a little for removing the parts + shipping so this wil be good deal for everyone

I need the armrest cover and GSX front calipers and lines. E-mail or PM me. Thanks.

If you could get me both front fenders, a driver's side door panel,
a driver's side rear quarter panel and a driver's side power mirror
assembly (the whole thing- mirror, motor, etc.) it would be greatly appreciated.

My email is j_3kgtvr4@hotmail.com --- Let me know on the prices and shipping to 95407. TIA

-Peace

>i need the oilpan off a 97-99 GST and oil feed line.

dont need anymore, i just got on today

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

I need both rear shock tower covers, tan in color.

sorry guys but i couldn't pull any stuff today weather was shitty here in pa but i will try to continue to answer peoples requests.

I need a plate/cover thing for the center console. Mine has been missing since the stereo was jacked last fall. I'm also in need of some functioning arms for the hatch, I'm sick of holding up the hatch with my head That's all I can think of for now. My email is: saltonaslug@yahoo.com

Chris

________________
Chris
'90 TSi AWD - Soon to be a built winter beater
'91 TSi AWD - For parts

http://www.kaptainmyke.com

hey i need just about every bracket that is metal and in the engine bay.. i am planning on sending everything out for powdercoating... everything from the brackets that hold on all of the resorvoirs, things right off of the block, hood prop and related parts, radiator bracktes, motor mounts... like i said just about everything.. get me via e-mail at sademenace@hotmail.com..

how about that ecu? 95 gs m/t

EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

I could use 97-99 headlights if the price was low enough... OH! and how about some jeep throttlebodies? I know there are quite a few people looking for those. might need a few sensors too... not sure yet. I'll let u know if i think of anything else.. compcentral@netzero.net

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

97-99 reverse lights, email is hance04@hotmail.com

soo... what about these parts?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?