Hahn 20G Ceramic Coated Hahn Manifold w/ Copper Gasket Spray and EGT Bung in fourth runner XtremeRS 2 1/2" Downpipe Jet Hot Coated Hahn Side Mount Intercooler (Some Bent Fins easily fixed) Vottech SFMU with all disc's and springs Accel 30lb injectors Accel inline fuel pump Black triple gauge pillar Autometer Boost, Oil and Full Sweep EGT gauge Hahn Back piping could use a repainting
Thats all the major stuff. Some hoses and hose clamps will have to be replaced as well as some wire for the fuel pump and sender for the oil pressure gauge. The black screw caps for the a pillar are missing. Some of the silicone conectors have been replaced with 7 layer high temp blue on the turbo and black on the TB. Still used the Hahn orange one on the lower intercooler intake and the black rubber 90 on the intercooler outlet. I will include all hose clamps, vacume hose (some red, blue and black) fuel pump relay and connectors and wire i have around. I also have the orgional instructions for the Hahn Kit and the Vortech SFMU so no guessing on instlation. System is complete except for couple nuts and bolts and exhaust gaskets. Some pics of the car on cardomain listed below.
‹totaleklipse97› so what benefits do i get from being ur e-boyfriend ‹Jen› uh... the honor? ‹totaleklipse97› somehow i guess i got that title now ‹Jen› somehow.....
#73958, "RE: FS: Hahn Stage 2 w/ Upgrades" In response to Reply # 7
The DP was bilt by XtremeRS off this forum adn then I shipped it out Jet Hot to get the Jet Hot 2000 coating. All together cost me around $500 for the coating and downpipe. If I put this kit on ebay I will sell the DP seperatly being I still have the orgional.
Search
Printer-friendly copy
1 User in Chat
