Okay, here are most of the parts i've pulled out of the car... make an offer on anything. If u don't see what u need, just ask... i probably have it.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

how much for the hood? I can send a ups call tag so don't worry about shipping.

how much for the center console w/ the arm rest?

Don't work for the system, Let the system work for you.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Don't work for the system, Let the system work for you.

I can do $12 shipped. Email me at Bfreakonaleash410@yahoo.com

just paypal it to compcentral@netzero.net and i'll ship it asap.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

just so nobody gets any ideas... i've already claimed the rear disc conversion set up, so stay away from that... IT'S ALL MIIIINE!!! MWAHAHAHAHA!!! (dude just let me know when you get it off)

Give me a price for the following shipped to Dalton, MA 01226

drivers side marker bulb socket with a few inches of wire
both door ajar sensors if they work
washer reseviour-cap only

Thats all i can think of for now.

ill take the hood, email me jmayer@nc-solutions.net

Do you have the black peice that is right above the stereo connected to the bottom of the HVAC controls? I think it also connects to the center console if it isnt broken.

'95 GSX - Big16G ~ Leaks, but atleast it runs.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

do you have the tranny and everything for a mtx conversion, if so how many miles on the trans and wut kinda shape is it in, how bout the clutch

yep.. everything is there, tranny, axles, ecu, clutch, etc.. I'd like to get $850 for it plus shipping.

edit: i drove the car before i started parting it out and the tranny shifted perfect.. no popping out of gears or anything like that. the car itself has 167K on it i think, but i think the tranny has less than that. not sure on the exact mileage of the tranny cause it may or may not have been changed when the motor was. I have an extra clutch with about 60K on it tho.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

hey bud, still no email from you about the hood

jmayer@nc-solutions.net

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

'95 GSX - Big16G ~ Leaks, but atleast it runs.

Originally posted by Sorry_i_Win

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

PM sent.

nevermind, already got one...

User banned for scamming members on 2GNT, WIDSM, and CHITOWNDSM. This user and his brother Jason Ames have been involved with theft of parts from other DSM members. This individual is not trustworthy and should not be involved in any type of sale.

Do you have the oem fuel pump. I would like to buy it if I may.

"Objects In Mirror Are Losing"

How much for the front bumper? Also, I need a stock clutch as long as its in good condition and does not slip or have problems.

"Shop smart, shop S-Mart!" ~ Ash
Member # 1523

i have three stock clutchs and all of them worked fine when taken off the cars. make an offer on one. farmdogg has dibs on the front bumper since he's local, but if he doesnt want it, i'll let you know.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

No fuel pump though huh?

"Objects In Mirror Are Losing"

i replied to your PM.. i have a fuel pump.. make me an offer.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Do you have a driver's side interior doorskin? if so, shoot me a pic...

_________________________________________
I'm the guy that bans you for breaking the rules. I am the troll killer. I am the law here.

ok i want passenger side door handle, engine, headlights, and drivers side brake caliper and carrier.

ps door handle 15.00 shipped
engine 450.00 + shipping to a biz addy
headlights 25.00 + shipping
drivers brake ass. 20.00 + shipping or ship with engine

what do ya think about those prices? email me at onefast420a@aol.com

http://publish.hometown.aol.com/southerncomphort/myhomepage/avatar2.jpg?mtbrand=AOL_US

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

i found a motor for a good price earler so i am buying it. all i need is the brake caliper and the carier that goes around it that bolts to the suspension

http://publish.hometown.aol.com/southerncomphort/myhomepage/avatar2.jpg?mtbrand=AOL_US

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

will have to use a money order bro

http://publish.hometown.aol.com/southerncomphort/myhomepage/avatar2.jpg?mtbrand=AOL_US

that's fine.. i'll pm u my info.. but what is your zip code so i can calculate the total with shipping?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

hey man did cliff get the motor off of you? i just sucked in some water on my motor and it's not looking good AT ALL!! i might need to buy the block or if i can the whole motor. not for sure yet, but i'm just scanning my options.

he's supposed to get back with me next week... he may have found a parts car. if so, it'll be for sale and you've got first dibs. i'd like to sell the engine whole, but if i can find a buyer for head, you can have the block. The engine only has 30K on it and cliff saw it running before i started parting it out, so you can be sure that its a good motor. I was asking $800 for it, but I'll take $700 for it. That's as low as I'll go tho. Look around at the local junk yards and you'll see how much they go for. If you need help getting it to your place, that can be arranged.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

I need the corner light socket, plug harness if you got it. Also radiator fans. How much shipped to 39443?

i have no idea what's a fair price to ask on the fans, but hows $50 shipped sound for everthing?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

hey man, don't need the motor, thank god! she fired up tonight and is running fine. whew! dodged a big bullet there... i definitly still want the rear disc set up though, but i think you probably know that by now, lol.

Not a bad price but I'm kind of strapped for cash at the moment. How about the harness and just one fan? The radiator fan not the a/c fan.

ok, how bout $35 shipped for that one fan and the socket with wiring? I'm probably screwing myself if i drop the price any lower cause shipping may be a bit high.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Did you read my last post? It's at the bottom of page 4.

i need the little rubber things that the springs sit on. if you can part those out with the springs and you have all 4 of them id buy them immediately. just gimme a price and ill paypal it to you. i need them asap and your like the only one that has them. thanks

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

mrj82
corner light socket & plug harness radiator fan. $35 shipped

-------------------------------------------------------------

iculookn
$12 shipped for center console cover HVAC cover

-------------------------------------------------------------

destruckeclipse: I still dont understand what u need...
-------------------------------------------------------------

scdsmracr
brake caliper and the carier that goes around it that bolts to the suspension
$20 + shipping

-------------------------------------------------------------

DmnLlama
ECU for a 1995 manual - $75 shipped



-------------------------------------------------------------

ultimar
tranny mount - $50 shipped

-------------------------------------------------------------

derek
steering wheel - $25 shipped.
... I need a steering wheel puller to get it the rest of the way off.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

bump

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

how much would you want for the head? JUST the head, no Valve cover, Cams, Cam gears, etc... or if you want to be lazy so be it...

either way, how much would you take for it? shipping to 61920

__________________________________
-Ryan

I think the entire engine is sold... but if it falls thru, i'll let you know.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

bump because I can't remember what else I wanted.

How much for all of these? That's the blue/grey colored stuff, right? Do you have the trim pieces that went on the hatch too?
mine had an incident with some blue paint

RIP- Rustbucket 1995-2009

‹hazardeclipse› by the way youre thinking of hazard_eclipse
‹hazardeclipse› thats not my fucking car
‹teklein› Oh yeah
‹hazardeclipse› he stole my name
‹hazardeclipse› fuck that radioactive yellow shit
‹teklein› Hazard_eclipse is the homo.

15 shipped?

DWAYNE H
1996 eclipse
under construction widebody eclipse, targa top, 19inch rollers, big brakes, 10 point custom cage, frank 2.4 hrc s20g turbo, custom marble paint job

2000 Yamaha R-1, 165rwhp 117 ftlbs tq

ALMOST THERE...... MUWHAHAHAHAHAHA

Originally posted by widebodied


15 shipped?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

for those and the trim pieces that went on the hatch, how does $40 plus shipping sound, since shipping could a bitch with items of that size? what's your zipcode by the way?

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

if the guy directly above me falls through i will buy the ENTIRE interior from you...EVERYTHING....all the trim peices, seats, carpet, trunk lid cover, apillar trim...ALL of it

'99 RS
gone, never forgotten

'03 BMW 330i 5speed

'00 Jeep Grand Cherokee Limited 4.7

add another $40 for the center console. note: these prices assume shipping costs arent astronomical, which i dont think they will be.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

bad carpet is better than no carpet....as of right now...ther interior of my car has 1 seat, some really fudged up trim and that it..no carpet, no headliner...nothing...

so lets say i'll offer you...$200 for it all...lets start there..

'99 RS
gone, never forgotten

'03 BMW 330i 5speed

'00 Jeep Grand Cherokee Limited 4.7

What happened to the interior? Since the carpet was all stained, i cut it when i was taking it out... so it really isn't much use, but i'll include it if u want it. the only other pieces that i know arent good are the dash itself and the one taillight cover that's cracked in the picture above. I'd take $200 plus shipping for all the trim pieces that i have (i'll take pics of everything to avoid confusion as to what that includes) and one of the seats (shipping will probably suck if i had to do both, but i could do it if i had to).

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

is cool, i don't need the dash...as for the seats i'll need all of them, both fronts and the bpth rear peices...so lets work this out..

'99 RS
gone, never forgotten

'03 BMW 330i 5speed

'00 Jeep Grand Cherokee Limited 4.7

hmm.. well I could ship all the seats, but i'd really need to get to the shipping place box everything up and see how much shipping will be. How does $250 plus shipping sound for both seats and all the interior pieces.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Do you still have the cataltic converter that has not been tampered with? If so how much?

I'll give 10 bucks plus shipping for the shorter one...or if you don't want to separate thme let me know how much

getty up

-kent-




'98 Talon...gone, but not forgotten

Sup I_Win... I haven't log on to this site for quite awhile now.

Seem good so far. You going to be one rich guy after this. lol.
I just wish I have time.

I PM'd you about that O2 Sensor. Aite.
Good luck on the selling.


BTW guys. I can gurantee that the engine/Tranny/and etc are all in EXCELLENT condition. Compression are good, good power.. etc. So don't worry too much!
Gil

~~~~~~~~Modification~~~~~~~~
Performance: MegaSquirt v3.0 Fuel & Spark, 8.6:1 JE piston, Eagle Long Rods, SPEC III Clutch, EVOIII B16G, FMIC, Aeromotive 1:1 FPR, Walbro 255HP, 680cc Injectors, 2.5" DP, 3" Magnaflow Cat, 3.5" Greddy EVO CatBack, Greddy Electronic EGT,FUEL,BOOST,A/F gauges...
Interior: Racing Seats, Metallic Interior, 15-Speakers System, Keyless, Dynomat Insulated, Neons...
Exterior: 1999 Body with turbo wing, Halo Projector Headlight, 4300K HID, 17" Mille Rims, GSX Calipers...
Coming Soon: Water Injection, Redo Undercarriage, Repaint Exterior


$240 For New Complete GSX Calipers Kit (Calipers, Bracket, Shim, Pad, Bolts, etc) Email Me If Interested!

1995 RED Eclipse GS-'T': Stage VI 20PSI
2010 Audi S5 Quattro

OK, lets start at $250, just get me a quote on what the shipping will be to mount pleasant, sc 29464

'99 RS
gone, never forgotten

'03 BMW 330i 5speed

'00 Jeep Grand Cherokee Limited 4.7

Originally posted by micyek
I'll give 10 bucks plus shipping for the shorter one...or if you don't want to separate thme let me know how much

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Do you have the Valve Cover? If so how much? I live in Simi Valley, CA 93063



Parts 4 Sale:

BRAND NEW Unorthodox UDP
Used Black Widow Front Bumper (Needs Work)
Used SF1 Front Bumper (Needs Work)
Used OEM Carbon Fiber Hood (GI)
Tenzo Type 2 Silencers (GI)
Used FMIC 22x8x2.5
95 Heater Core

Just Ask Q's & Make Offers HipHop615@yahoo.com

hey man, i did get your pm, sorry i haven't gotten to call you yet. i'll be calling you this weekend. if ivan doesn't flood the hole freaking state, i might be able to come out tomorrow, MIGHT. also, if scdsmracr doesn't get that caliper, then you can put both calipers aside for me and then i'll give you $140 for the two calipers and "the other stuff". what do you think?

that sounds fair. I have an extra set of stock front calipers from when i upgraded mine to gsx calipers anyway.

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

will you take 20 bucks for those tail lights?

_ _ _ _ _ _ _ _ _

96 Black ESi
91 Red TSI AWD (RIP)
02 WRX


"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"

Aerospace Certified TIG welder for Precision Castparts in Portland, OR.

JoshSpair.com

i wanted to get $40 plus shipping for all 3 of the taillight pieces

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?

Originally posted by HipHop615
Do you have the Valve Cover? If so how much? I live in Simi Valley, CA 93063 Parts 4 Sale: BRAND NEW Unorthodox UDP Used Black Widow Front Bumper (Needs Work) Used SF1 Front Bumper (Needs Work) Used OEM Carbon Fiber Hood (GI) Tenzo Type 2 Silencers (GI) Used FMIC 22x8x2.5 95 Heater Core Just Ask Q's & Make Offers HipHop615@yahoo.com

Anyone know anyone who can help me tune this in the Pittsburgh area (Greensburg)?