12:1 fmu 255 hp walbro intank custom log manifold for t3/to3 (needs to be grinded down) to3 m10 turbo .42/.48 45 trim turbo dsm smic 450cc dsm injectors( you need to get a resistor pack) hks standard bov 3 2.5 90 degree bends (2 feet long) 3 2.25 90 degree bends (2 feet long) custom made down pipe (2.5") auto meter boost gauge (white face) missing link
this is a pretty much complete stage 2 kit
you have to bend the ac lines to get the air filter to fit because the compressor is facing the passenger side
also your gonna need fuel and oil lines and also a tee for the line
but thats pretty much it ill also guide you on the installation
other then that you have pretty much everything you need
1g shipped
and no im not parting out (sorry if you were gonna ask)