just like it says, looking for a 97+ fuel rail

thanks,
Ryan
avengr1995@aol.com

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

bump>

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

Out of curiosity, what do you need it for?

>Out of curiosity, what do you need it for?


8 injector set-up... actually had the rail like a month ago, but sold it here for like $15 now i need another one

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

o.k. that's what I thought it might be for. I was going to use a 95 fuel rail for my 8inj. setup, but the way the fuel supply comes in with the flange kinda sucks and I didn't have the hose with the crazy flange O-ring(and it's a very expensive satan part) Anyways I just used a fuel rail off some sort of Neon(sorry, cant remember the year, it was a first gen), I cant remember if it was a dohc or sohc, either will probably work, but it is alot easier to get at in the junkyard since its on the plastic manifold on the front of the motor. The standard size injectors work, the injector spacing is exactly the same(3.75in if I remember correctly) and you can use the quick disconnect fuel supply line(make sure you grab this if you go this route). I went with this because there is like a zillion neons at the junkyard(disposable car???) and I couldn't get that hose that I mentioned earlier for cheap. Just thought that I would point out that you have other options in case you can't find that 97-99 rail.