For Sale -

I have recently done a 5spd swap, so I no longer have any use for the following parts:

ERT's Track Master High Stall Torque COnvertor - This is a Hughes torque convertor w/ a rated stall speed over 3000 rpm.
Converter is brazed w/ a strengthened sprag, special cut stator, and full needle bearings front and rear.
This will be the last torque convertor you will ever need. ~3500 miles on it, and only a 2-3 hard launches.
$500 new, $225 pickup, $250 shipped for slightly used unit





Built a604 for the 420a - Raybestos Race Clutch Packs and Plates, Aluminum accumulator pins,
Blue Plate Special gaskets and softparts, Fairbanks Shiftkit.
Tranny has ~20K miles on it, only 1/2 that was while I was turbo'd.
This originally was a $3,000 tranny, but the OD clutch hub needs to be replaced.
All upgraded parts are still in excellent condition, the friction materials still grab awesome, even at 18psi.
Unfortunately, the gear hub on the OverDrive Clutch hub is sheared off and needs to be replaced to take advantage of this trans.
I was quoted $300 for repair.

My loss is your gain - $250 OBO (I just need it out of my garage), local pick up only please
(Gainesville, FL - I would be willing to meet up w/ someone 1/2 way within reason)






If someone is interested in the built atx WITH the high stall torque convertor, I will sell them together for $450.
Again, local pick up only, but I would be willing to meet 1/2 way within reason.


OEM Replacement Torque Convertor - this is a stock replacement, stock stall speed torque convertor.
~15K miles on it, still worked perfect when removed - $35 pickup, $60 shipped



If someone is interested in the built atx WITH the stock stall torque convertor, I will sell them together for $275.
Again, local pick up only, but I would be willing to meet 1/2 way within reason.






I think all these prices are fair, but I will entertain all offers so dont be shy to try and work out a deal, especially if your looking for multiple items.

Paypal, Money Order and cash accepted.

My paypal is avengr1995@aol.com

Thanks, and feel free to ask any questions
-Ryan

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

bump

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

bump

OBO

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi

atx and high stall torque convertor are spoken for.


stock stall speed OEM replacement is still available, will consider all offers.


Thanks,
Ryan

95 Avenger
ATX->MTX Swap
Holset HX40 @ 26 psi