I am back guy's with some other stuff I need to get rid of, hope hope you see somthing you want.
Stock cam gears $20
Stock head w/internals $100
Stock intake manifold $50
Stock valve cover $20
Stock throttle body $25
(2) stock Coils NEW $30 each
Accel spark plug wires $20
(2) Accel motorcycle coils NEW $50
Set of Polly Eurothane motor mount inserts NEW $25
96 Manual ECU (spare one) $75
Driver side pillar drilled for guage pod (dont mess yours up use this one. Blue in color $10
Geddy seat belt pads NEW blue in color $20
Complete set of valve seats and stem seals for a head rebuilt new in factory plastic $100
4" custom sheet metel intake manifold w/adapter to bolt factory size Throttle body on. $200
Last but not least!
Fully built head Ported /pollished Stainless steel Oversized valves, PT cruiser Upgrades,Crane Titanium retainer/spring kit, Custom grind Cams from web to run high boost/Nitrous and a set of Unorthadox Cam gears(pollished siver).
NOTE: I will need a week to have the head swapped out and replaced with my factory one, but if someone buy's my factory set up I wont be able to sell the built one. So make me the best offer you can before that happens. Due to the Motor selling so fast, if Dwayne or Siver GS gets first dibs. My e-mail is PPURERAGE@AOL.COM
SEE YA!!!!!!!!

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

You have mail about the intake manifold. (sold as soon as you get back to me)

Info about the head as well...

Which model are the Accel wires and are they new? If so consider them sold to me. I can paypal the money to you immediately.
thanks,
Chris b.

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

Chris,They are new but not to sure on the part# or model of wires they came with the coils I am selling they look like they are 8 or 9mm in size and they are Yellow with orange ends. They were like 2 feet long with the hardeware and I had to cut them to size and install the ends (custom). Let me know. SEE YA!!!!!!

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

I will buy the throttle body, can i send you a money order or cashiers check for it, i dont have a pay pall account. and if ^^^^^^^ dosent take the intake mani i will buy it as well.

Ryan

Hit me up at my e-mail about the Throttle body. Money order is cool

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

you have mail

due to the response on the head, I am giving it till tomarrow evening (Monday night) to veiw all offers, giving it to the highest one I will e-mail that member. Thanks, SEE YA!!!!!!!

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

Hey Ray, got a question on the head...As of now I am NA and don't have nitrous, can you tell me if the swapping that head onto NA would be beneficial?

Also I am interested in IM, TB, and the accel plugs wires...I also emailed you

Ray, i have e-mailed you 3 times to ensure i get the tb, i can even pay more than 25 to get it if need be, i can have a money order onteh way tommorow. If you have any ?? you can call me at 913-485-1388

I want the tb

Ryan

what do you mean by blue a-pillar ? like a blue/gray? I have gray and need a spare. How much for shipping to 90063? Thanks. I will take it if it matches or is similar to this color

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Well so far the highest offer for the head has been $650, so unless you can top that it will be going to the person who made that offer. Call me with any last minute offers tonight. 305-785-6857 Ray as for the pillar it is blue/grey in color and I will ship it for $5 more, let me know. Any other questions call me. SEE YA!!!!!!!!!

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

if the other buyer for the throttle body falls through ill take it!!!

Member # 751


FOUNDER of the Central Cali chapter of 2GNT!
(I got kicked out after I refused to go Cow tiping) - Hehehe you know who this is for

The built head is going to Jake
Intake manifold goes to Brian
Throttle body goes to Ryan

Did I miss anyone? Let me know if you wanted something and you are not on this list and what you were interested in.
Thanks, Ray

Here is what I have have.
JE 8:8.1 with rings boared .20 over
Seinze custom rods (600+hp)
Knife edged and shaved crank
Clevite bearings
Shaved oil pump to bump up oil preasure
Stage 3 ported and pollished head
twin Accel coil packs
PT lashers
ov

Ray I would really like the opertunity to beet that bid on the head.... i already missed the engine and I can beat $650. i'll shoot you an e-mail too. I tried to call twice and got no answer.

I edited to the wiki!

Ray give me a call. (810)982-4034 we need to talk

I interested in the a-pillar and the valve cover. the valve cover is in good shape? let me know my zip code is 00680 angel_a_rivera@hotmail.com

96 Eclipse RS - sold
92 Eclipse GSX

Just to let you no i have not heard from ray in a long time. Best way to get ahold of him is to call but as of the last month has not answered.

Send Ryan95i4 a PM. He bought Rays engine and *maybe* has his phone number. Fast420a, Dave_FL, and JustOne may know also.

------------------------------------------------
98 ESi
95 GS

I got his cell and his home phone just never no answer. I will et ahold of them guys thanks

Still no phone call back. If some one is in contact with him tell him this is his last chanse to call me back Thanks