Since the IL meet is comming up thought i would post a few things that blacken a spot in my garage/Shed.

Complete A/C lines, Evaporator coil under dash.
Complete power steering lines
Front knuckles
Front bearings rebuilt...45 each
Left and Right axles great shape
Rack and pinion
Rear Gs 95 bumper....black paint good shape..i would repaint
Grey front and rear seats...great shape...pass has burn hole that has been stitched...dont notice it...in crevice
rear corner glass interior plastic
Speaker mounts
front subframe
drivers quarter panel complete
both doors shells..very nice black each has small ding from shopping cart...dry ice will remove
spare set of winter steel rims....need tires...little late i know
spare tire
front lower lateral arms....have been warrentied not long ago...still have mitsu sticker on them..i will include new boots for Ball joint
front cross drill rotors...powerstop...have some surface rust.
dash....grey in perfect shape
gauge plastic surround..black
upper control arms...all four corners
steering wheel....grey no airbag.

that mostly all i can think of....if anyone seriously wants someting dont be afraid to make an offer...i just want to get rid on this. bearings are the only things i have a price for the rest is just make an offer and its yours.

Thanks

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

oh and things i am looking for 9Havent had time to go buy) if you have them laying around for a swap maybe:

Axle seals
Input shaft seal for bell housing
cam seals
feed line for a 4150 holley DP....looking for the AN style. I know this is kinda odd for this board but some guys have an interest in classics like me

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Also have a stock cat
ceramic coated heat shield for factory Ex manifold.

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)

Bring along the upper control arms if you don't mind. I think I'll take them. Assuming I do, 20 dollars cool?

-Mike

amiller99rs: seriously, chicks suck sometimes
amiller99rs: like if a girl walked by and said "Hey, nice cock" and just kept going you'd smile all day about that

which ones do you want? all four?

Terry

96 Eagle talon ESI
rear disk conversion - Niche 17" chrome shoks - Stillen front and rear sway bars - Koni yellows wrapped with eibach - Star Stage II - Optima locate in the hatch - Tenzo-R seats/4 pt harness - momo Steering wheel - Boost/oil/EGT gauges, HKS TT

Waiting to be installed: Apexi AFC, HKS EVC IV, ceramic intake, 355 neon tranny, stage 2 MIBA clutch, Power doors, 450 Turbo injectors, Adj Fuel reg/return line, Backseat eliminator kit(my design), GSX Front brakes (need rotors)