I am selling my built shortblock from my car (www.armond30.com/adp/001.html). the block comes equipped with oil pump, oil pickup, knife edged nitride treated crankshaft, ARP beadplate studs, Clevite77 main and rod bearings, Crower rods, JE pistons with Hastings piston rings with a ring gap of .015 top and .021 middle. Piston compression is 8.8:1. seals and oil pump have about less than 8K miles on them. holds perfect compression (185 across the board with crane #18 cams). balanced to spin up to whatever rpm.......seriously. selling for 1500 plus shipping (freight) you can't buy a better built 2.0 420A for less. pictures of the crank and such should be on the site. the block is bored .040 over. block is already broken in. bolt up and boost/juice away. comes with oil pan with oil return drain for turbo. e-mail at gte201j@mail.gatech.edu if interested.


A.D.P.
"...If you do too much, people become dependant. If you do to little, people loose hope. If you do it right, people won't be sure you've done anything at all."
bring it on...........

First Dibs, and I sent you an email.

95 GST | So-Cal

second dibs, have money in hand

______________________________________________________
2003.5 M3
99 M3
99 GST

Hope you get the block Mike, looks to be a "sick" block to play with

-K-