I'm thinking about going back to stock in preparation of selling my car. I'll give more details on why later on. =)

These are the items that are definately for sale:

-Injen Intake with CAI extension and K&N filter: $100
-Set of carbon fiber altezza's: $60
-Sand blasted,Hand polished Valve Cover, will include vc gasket (and i think i have spark plug well gaskets too): $100
-Stock intake manifold upper and lower, and tb: $100
-Turbo wing painted black: $150
-Hurricane GS lower tie bars; front bar has 3" bend: $50
-Rare Neuspeed 5th bar: $50
-GST muffler: $35

*Prices do not include shipping, so please consider that when you're uh.. considering.
**I'm not in a rush to sell, as the title of the thread shows, so don't try to low ball me. I priced everything as I think it should be, but I may not be aware of the "going rate" so if you'd like to inform me of that, i'd appreciate it.
***I will take pics of things as people ask for them, since some of the stuff is still on the car.

Stuff that can be for sale if people offer me enough to entice me to do the work:

-Eibach pro-kits/Tokico Illuminas: I will need stock shocks.
-ARD P&P intake manifold
-ARD 58mm TB (I asked for 57, but they ended up saying they got it to 58)
-AFX udp: i'll let this go if you come pull it yourself, heh, it was too tough the first time around.
-Pacesetter 2.5" exhaust: I will need catback section of piping (meineke cut mine, goddamn it), mine is welded so you will either have to reweld or coupling and clamp it.

I think that's it, I don't think I missed anything. So please post and let me know if there is any interest. If not, I will just try to sell my car as is. I'm only offering 2gnt people because I'd like to pass on the mods to my family, but if nobody here wants, then i'll get rid of everything at once with the car.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

how big is the opening to the p/p intake manifold?How much did it cost to p/p it?

USMC Semper Fi

Is it just a GST muffler, or is it the whole axle back section to bolt up?

Andy

MonteSS86@hotmail.com

Check out my homepage:
http://www.geocities.com/ozzmosis86/Home.htm

and my pics page:
http://community.webshots.com/album/95705837hSPLvt

i call the altezzas. 80130 price on shipping please? also, can you send some pics to ajcfalcon85@aol.com.

thanks man

1998 GS
Mods: Cold air intake, Ported/polished stock intake manifold, AFX 55mm TB, Pacesetter header,
Custom Magnaflow cat-back exhaust system, AFX Underdrive pulley,
B&M short throw shifter(cut/welded), Symborski Shift Kit, Solid front motor mount, Monster ground wire kit.

Status: Finally up and running!

hey interested in the neuspeed bar, what color is the neuspeed logo? check on shipping to 33617. also it there any scratches or anything. thanx

I no longer have my 99 rs because i totaled it!!!

I'd buy the black turbo spoiler. Dibs!

I eat emo kids for breakfast

1995 Eagle Talon (SOLD)
72' SuperBeetle
72' Standard Beetle
56' Deluxe Beetle

im interested in the intake manifold check shipping prices on 36301.

p&p intake mani was 80 bucks from ARD, tb was 120. ARD did a good job of matching intake mani to tb, so the opening is about 58mm as well.

GST muffler is axle back, it will bolt right on. My first mod, and I loved it.

Altezzas are fine, the centerpiece needs to be resealed. It collects water on humid days. Should be as simple as resiliconing everything. Also, they are not DOT approved, which I found out during inspection. Never got pulled over for them though. I'll take pics in the next couple of days.

Neuspeed bar's logo is coming off, it is blue, but the way it sits in the engine bay, the sticker rubbed against the hood or something. The N is coming off and it might actually say "euspeed". haha. I don't think there is any scratches. I'll have to check.

Spoiler is all yours. I have to find a box for it, and if you're profile is correct and you're in canada, you sure you want to pay that shipping? My guess is at least 50 bucks just based on the size the box will be. Also, minor scuff near the left tip, it could be buffed out. I never tried buffing, because I was just going to figure it out after I installed it, but never got around to that.

I'd like to sell intake mani as a set with the throttle body, unless you're willing to buy the mani for 100 and get a free tb. :p It would just be easier for me to do it that way.

For everyone, give me like a week to get my stuff straight, I was just gauging interest, which there seems to be alot of, so i'll get right on it.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

pics of taillights.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

How much would shipping be to Fort Wayne, IN 46835 for the axle back GST section?

Andy

MonteSS86@hotmail.com

Check out my homepage:
http://www.geocities.com/ozzmosis86/Home.htm

and my pics page:
http://community.webshots.com/album/95705837hSPLvt

I seem to have a couple people interested in the ARD p&p mani and tb. I will only sell this as a set. I don't want to split it up because it'd defeat the purpose of having the p&p mani if i'm bottlenecking it with a stock tb. I'd much rather just let the next owner of my car enjoy my hard work.

Taking into consideration things like you having zero downtime and drastically reduced waiting period (ARD took about 3-4 months to get mine done) and me busting my knuckles to get mani off... Asking price is 250 shipped. Keep in mind that you'll be able to sell your mani and tb afterwords and make some of the money back.

Yea, it's not that much cheaper then if you were to get your own stuff done, but it's the only way I can justify me doing work on the car. Oh, and I suspect the mani will be very clean, because I don't have EGR blowing half burnt fuel back into it.

For those that asked for shipping prices, I will do some research on it at work tomorrow.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

hey man, i would be interested in the mani/tb combo for 200 pick up?

______________________________________________________
2003.5 M3
99 M3
99 GST

sent PM


New/More Mods Comming... New 1/4 Times In March/April

shipping prices:

$15-20 for tail lights
Around $10 for nuespeed bar

All prices are estimates.

Also, you can look up your own postage estimates http://postcalc.usps.gov/

Don't worry, i'm not ebay, i won't be scamming you on shipping. I'll charge for actual shipping (rounded to the near whole dollar) and for any shipping materials I may have to buy, since i don't have boxes etc for everything i'm selling.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

I'm interested in the tie bars!

Keepin it clean!!

I'm interested in the valve cover.. any pics? pm me or email me.
thanks.

-97 GS (First project, 299 whp)(sold)
- 97 RS 2.6 last numbers: 306hp, 352tq @16psi (Dead, parted out)
- 99 GS OZ, Hahn Kit, 56k miles (Sold)
--------
- 00 Nissan Maxima GLE (Daily Driver)
- 02 Audi A4 1.8T Quattro

Dibs on the Neuspeed bar too!

Keepin it clean!!

i already said i was interested in the neuspeed bar but if you get him the money soon before me then it is cool with me

I no longer have my 99 rs because i totaled it!!!

Next dibs on the taillights.....If no one send you the cash or you prefer paypal, hit me up and Ill let you know. Sean.guedes@mobility.com!

Sean

Ill take the p/p intake and 58mm tb. Iam may be able to do paypal but if not can i do money order? Email me at lude291@yahoo.com

USMC Semper Fi

Pic of valve cover:




***NOTICE***
Thanks everyone for all your interest in parts. I have talked to a few of you about selling the things that are already off the car (taillights, wing, vc). As for the things that are still on my car, I was really just trying to collect interest. I will contact all those interested in like a month or so and see if you're still interested. I am not sure myself what i'm going to do with the car and I may have jumped into this too quickly.

So I apologize for any raised hopes I may have caused, but i figure no harm done since no money was exchanged.

Things still for sale:

Taillights: Spoken for, waiting for payment.
GST Muffler: Open I think
Turbo Wing: Have one or two interested
Valve Cover: Have one or two interested

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

Dibs on GST if it's still open.
YGM PM.