|
I'm selling everything from HRC kit from the fuel tank assembly to the stock fuel feed line. In addition, this will include the -6AN fitting from the stock fuel filter to a stainless steel braided line to the Accel inline fuel pump. From there, I will include another SS braided fuel line to the hard line with another AN fitting to the stock hard line. I also have the specially cut metal plate with rubber brackets to the stainless steel protector plate. It's all included(fuel pump, lines, new-ish fuel filter-less than 15k miles).
These SS lines will not only add significant protection and stability to your fuel feed line, but they will NOT KINK. Anyone who knows anything about this fuel setup, knows that when adding an inline fuel pump to this area, not only understands the fuel pump/fuel lines' exposure to the elements, but also understands how soft lines ALWAYS want to kink down here. That's why I changed them out.
Again, for anyone looking to add a fuel system to their custom turbo kit, this is what you want/need. It would literally take about 20 minutes to install this and not have anything to worry about in terms of fuel. All you need to add is the adjustable FPR, and if you have a 96+ car, the fuel return line which is cake and CHEAP.
This pump was on my car and NEVER failed me. In addition, it was VERY quiet on my car working in tandem with my Walbro 255 (which is also quiet).
I don't need this anymore since, I run low fuel pressures. However, for anyone running higher than 90psi in fuel pressure, you NEED this stuff!
I'll sell it all for $85 shipped! Paypal accepted (and preferred!) _____________________________________
Jason ESi-T
04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)
|
Search
Printer-friendly copy
1 User in Chat
