Here is a listing of parts that I have for sale

Please either make an offer by either posting to this message or contacting me at my email: kteclipse@comcast.net


1) Short Block
-Fully assembled with stock pistons, rods, and rings
-210 psi across all cylinders
-50,000 miles on engine (8,000 of which were turbo miles @8 psi)
-Will include damaged oil pan (dented), 4 extra used stock pistons with rings, and 4 stock rods. No gaurantee on how good these extra parts are as they were given to me when I bought my spare block for rebuild.
-Short block is in excellent condition. No broken or stripped bolts in block.
-Looking to sell for $400 w/o shipping costs (preferably to someone in New Jersey who can pick it up)


2) Stock Exhaust



--Only 20,000 miles on the stock exhaust
--Was kept in my shed out of the elements
--In Excellent Condition
--Make offer


3) Stock Shocks and Springs



--About 30,000 miles on these shocks and springs
--Looking to sell all 4 springs and shocks as a set
--Make offer


4) Stock Shift Boot, Shifter, and Knob




--Like New
--Make offer


5) Stock Clutch and Brake Pedal Covers



--Like New
--Make offer


6) Iceman Cold Air Intake



--Used for about 20,000 miles
--Make offer


7) Stock Air Box With Filter



--Make Offer


I will ship the item 1 or 2 days after I receive payment.


Thanks,
Kurt

I might be interested in the short block.
what car/year is it from?
thanks
PhantomSniper801@aol.com

The motor is from a 1996 Mitsubishi Eclipse GS. I looked in your profile and it looks like you are from Utah. As mentioned above, I would really like to sell this locally (someone to pick it up) as shipping would probably cost another $140 bucks.


--Kurt

im interested in the stock shocks and springs, what are you looking to get for them?

EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

I did some research as to what these parts cost from the dealer brand new

Springs: $70 each
Struts: $110 front, $90 rear


Of course the springs/struts I am selling are used and the price is adjusted accordingly. I could let the 4 springs and 4 struts go for
$225 shipped.


Let me know,
Kurt

well 225 is a bit steep, you have to remember that they are stock, and you can find much better brands much cheaper(used of course), but i'll pass on these

EclipsedChef was my first name..Member #460!

::::..Under Construction..::::

Would you be able to sell the shifter boot alone. If so dibs on it.

I contributed to the wiki!

95 Eagle Talon ESi-T (BACK FROM THE DEAD!)
98 Dodge Neon R/T
93 Saab 900 Turbo Commemorative Editon #86 of 325 (sold)
95 Volkswagen GTI VR6 (saved from crusher)(sold)

I am not sure what going price is on the shift boot but how does $20 for the boot plus $5.00 shipping sound?

If you are still interested, let me know.
Kurt

Does that engine have a timing belt tensioner pully on it by any chance? I really need one.

96 Eclipse Base 5 spd
Rebuilt engine w/ forged internals, APC Air Filter, Clear bumper lenses, 15" ICW wheels, Alpine v12 amp, 2 12" Xplodes, 5.6" lcd monitor, Dvd player, Playstation 2, Power1 Exhaust, Aerospeed Wing, Altezza tails w/ painted center, 20% tint, Silver Graphics, Audiovox alarm system.

Big transformation underway this winter!

Sorry man but I threw out all the timing components during the pull for the built engine. I figured they had 50,000 on them and so I replaced them with all new equipment (hydraulic tensioner, tensioner pulley, and idler pulley). The idler pulley was shot. The bearing inside was starting to hang during morning start ups (slight belt squeal) and began to glaze and shred the timing belt. After seeing that, I wouldn't have chanced the life of the engine on pulleys over 50,000 miles.


--Kurt

yea dude, $225 is a bit steep. he could have a tokico spring and hp shock package for another $50 - $75. i would say like $150 at most.

Will the CAI fit a 96RS?

weather turning towards a storm broken down road continue on coexistance imitating paradise
unlike any seen moist has been dancing crazy overcast ash grey wording constantly pushing pulling pushes away

sacred? you really are?
m'not scared
then what are you?

drew back a rusty knife guilt ladle pour it on understand i burn inside how to get out of here how do you get out of this natures revenge nature
cage craving wonder the worth of it scream at the top of your lungs so many times tried not to wonder

If you stil have the short block in the middle/end of Dec. I will be more than happy to come pick it up. By no means hold it for me but if it is still available then I will take it. I live in south jersey and have a friend with a truck who will pick it up fo me. I'm just asking you to keep me in mind if it's still around then.

Thanks Lonnie


98 GS
HRC Stage II
14.852@94.43
http://members.cardomain.com/lonnie1977

Yes the ICEMAN cold air induction system will fit a 96 RS. I had it on a 96 GS and the only difference between the two models is some of the power options (door locks, windows, etc), body options (wing), paint trim options (painted handles and side view mirrors), and wheels (tire size, rims, etc).

I was thinking of selling this intake for $70 plus $5 shipping since a brand new one goes for about $200.


If you are interested, let me know.
Kurt

The engine block has been sold.

These items will be moved to ebay tonight. If anyone wants to buy one of the remaining items, please contact me ASAP.

Thanks,
Kurt

consider the stock air box and stock exhaust sold

james

what the hell..why are these old posts coming up??

Aem Cold Air AFX 55mm TB
Fidanza Cam Gears NGK Wires
AFX UDP Greddy Header
Gutted Cat Greddy Evo Catback
Energy Suspension MMI Eibach Sportlines
Tokico Blues...always more to come